Studies on the Cl + C2H5I reaction; site specific abstraction reactions and thermodynamics of adduct formation studied by observation of HCL product
Literature Information
R. Wada, R. C. Sharma, M. A. Blitz, P. W. Seakins
The reaction of chlorine atoms with alkyl iodides can play a role in the chemistry of the marine boundary layer. Previous studies have shown that at room temperature the reaction takes place via a complex mechanism including adduct formation. For the Cl + ethyl iodide reaction results on the thermodynamics of adduct formation and on the product yields are inconsistent. The kinetics of the reaction Cl + C2H5I have been studied by the direct observation of the HCl product in real time flash photolysis/IR absorption experiments as a function of temperature from 273 to 450 K. At temperatures above 375 K kinetic measurements confirm a direct process and the rate coefficient determined (4.85 ± 0.55) × 10−11 exp((−363 ± 51)/T) cm3 molecule−1 s−1 is in good agreement with previous direct determinations. Product yield studies have also been undertaken by comparing the HCl signal from Cl + C2H5I with that from a calibration reaction which shows that HCl is the sole product of the reaction at these temperatures. Yield studies with selectively deuterated ethyl iodide demonstrate that abstraction occurs predominantly from the α site, with the selectivity decreasing with temperature. Extrapolation of the yield data to 298 K predicts an α : β ratio of 0.68 : 0.32. At temperatures between 273 and 325 K a biexponential growth was observed for the HCl signal consistent with adduct formation. Analysis of the HCl time profiles allowed the extractions of the forward and reverse rate coefficients for adduct formation and hence the calculations of the thermodynamic properties of adduct formation. A third law analysis yields a value of ΔrH = (−54 ± 4) kJ mol−1. The value of ΔrH is in good agreement with a previous third law determination (J. J. Orlando, C. A. Piety, J. M. Nicovich, M. L. McKee, P. H. Wine, J. Phys. Chem. A, 2005, 109, 6659).
Related Literature
Erythrocyte-like hollow carboncapsules and their application in proton exchange membranefuelcells‡
Jung Ho Kim, Jong-Sung Yu
DOI: 10.1039/C0CP00698J
Metal–organic frameworks as high-potential adsorbents for liquid-phase separations of olefins, alkylnaphthalenes and dichlorobenzenes
Luc Alaerts, Michael Maes, Monique A. van der Veen, Pierre A. Jacobs, Dirk E. De Vos
DOI: 10.1039/B823233D
Confinement effects on excitation energies and regioselectivity as probed by the Fukui function and the molecular electrostatic potential
Alex Borgoo, David J. Tozer, Paul Geerlings, Frank De Proft
DOI: 10.1039/B820114E
Reactivity in the confined spaces of zeolites: the interplay between spectroscopy and theory to develop structure–activity relationships for catalysis
Mercedes Boronat, Patricia Concepción, Avelino Corma, María Teresa Navarro, Michael Renz, Susana Valencia
DOI: 10.1039/B821297J
Ionic liquids through the looking glass: theory mirrors experiment and provides further insight into aromatic substitution processes
Shon Glyn Jones, Hon Man Yau, Erika Davies, James M. Hook, Tristan G. A. Youngs, Jason B. Harper, Anna K. Croft
DOI: 10.1039/B919831H
Symmetry forbidden vibronic spectra and internal conversion in benzene
Jun Li, Xiang Yuan Li, Chao Yuan Zhu
DOI: 10.1039/C0CP00120A
Disproportionation of thermoelectric bismuth telluridenanowires as a result of the annealing process‡
Andreas Berger, Laurent Cagnon, Ulrich Gösele, Kornelius Nielsch
DOI: 10.1039/C0CP00749H
Electronic view on ethene adsorption in Cu(i) exchanged zeolites
Pawel Rejmak, Mariusz Mitoraj, Ewa Broclawik
DOI: 10.1039/B920551A
Chemical and electronic properties of the ITO/Al2O3 interface
Yvonne Gassenbauer, André Wachau, Andreas Klein
DOI: 10.1039/B822848E
Adsorption-induced structural changes of gold cations from two- to three-dimensions
Yi-Lei Wang, Ya-Fan Zhao, Ai-Qin Wang, Tao Zhang, Jun Li
DOI: 10.1039/B921367H
You might also like
Is 6-(3-Fluorophenyl)picolinic acid (CAS: 887982-40-3) safe?
6-(3-Fluorophenyl)picolinic acid is generally considered safe for laboratory use...
What industries use (3R)-3-Pyrrolidinol (CAS: 2799-21-5)?
(3R)-3-Pyrrolidinol is used in the pharmaceutical industry as a precursor for dr...
What precautions should be taken when handling (4R,5R)-4,5-Diethoxycarbonyl-2,2-dimethyldioxolane (CAS: 59779-75-8)?
When handling (4R,5R)-4,5-Diethoxycarbonyl-2,2-dimethyldioxolane (CAS: 59779-75-...
How is 1-(6-Chloroimidazo[1,2-b]pyridazin-3-yl)ethanone (CAS: 90734-71-7) typically synthesized?
1-(6-Chloroimidazo[1,2-b]pyridazin-3-yl)ethanone is often synthesized via a mult...
What is the market or research trend for N-Ethyl-3,4-dimethylbenzylamine (CAS: 39180-83-1)?
The market for N-Ethyl-3,4-dimethylbenzylamine (CAS: 39180-83-1) remains steady,...
What is Tert-butyl 3-(pyrrolidin-1-yl)azetidine-1-carboxylate (CAS: 1019008-21-9)?
Tert-butyl 3-(pyrrolidin-1-yl)azetidine-1-carboxylate is a chemical compound wit...
What regulatory guidelines apply to 1-Bromo-3-chloro-2,4-dimethoxybenzene (CAS: 1228956-93-1)?
1-Bromo-3-chloro-2,4-dimethoxybenzene (CAS: 1228956-93-1) falls under the classi...
Is 8-Bromo-2-methyl-3,4-dihydroisoquinolin-1(2H)-one (CAS: 1368622-07-4) safe?
The safety of 8-Bromo-2-methyl-3,4-dihydroisoquinolin-1(2H)-one (CAS: 1368622-07...
Is Benzyl [(3S)-2,6-dioxo-3-piperidinyl]carbamate (CAS: 22785-43-9) safe?
Benzyl [(3S)-2,6-dioxo-3-piperidinyl]carbamate is generally safe when handled wi...
How should 1-{[4-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]sulfonyl}pyrrolidine (CAS: 928657-21-0) be stored?
1-{[4-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]sulfonyl}pyrrolidine s...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.













