Enhanced interfacial activity of multi-arm poly(ethylene oxide) star polymers relative to linear poly(ethylene oxide) at fluid interfaces

Literature Information

Publication Date 2017-07-10
DOI 10.1039/C7CP02841E
Impact Factor 3.676
Authors

Yun-Ru Huang, Melissa Lamson, Krzysztof Matyjaszewski


View Original

Abstract

Interfacial tension reduction, dynamic dilatational elasticity and extent of adsorption were investigated for linear poly(ethylene oxide) (PEO) chains of varying molecular weight and for PEO star polymers with an average of 64 arms per star at air/water, xylene/water, and cyclohexane/water interfaces. Adsorption on planar interfaces was monitored by ellipsometry, while interfacial tension and dilatational elasticity were measured separately by pendant drop tensiometry. Previously reported to be efficient emulsifiers, PEO stars are shown here to also be more effective foaming agents than linear PEO. Accordingly, PEO stars adsorb to a greater extent and produce larger interfacial tension reduction and greater dynamic dilatational moduli than linear PEO. The more extensive adsorption and greater interfacial tension reduction for PEO stars are attributed to their compactness. More mass is introduced per unit area of interface, and more interfacial penetration is achieved, upon their adsorption than for adsorption of linear polymers that adopt the conformation of loops, trains and tails. Whereas cyclohexane is a non-solvent for PEO, xylene is a good solvent. Dispersing PEO stars in the xylene phase yields greater interfacial tension reduction at the xylene/water interface than occurs when initially dispersing PEO stars in the aqueous phase. In contrast, the interfacial tension for linear PEO shows no dependence on the phase from which it adsorbs. Ellipsometry confirms the path-dependent extent of adsorption to the xylene/water interface, but also reveals additional complexity. When adsorbing from xylene, thick interfacial films result that likely contain dispersed water, as suggested by the observation of spontaneous water-in-xylene emulsification when PEO stars are initially dispersed in xylene. This is tentatively attributed to shear provided by Marangoni flow. Spontaneous emulsification occurs only when PEO stars are initially dispersed in the xylene phase. Linear PEO produces neither thick interfacial films nor spontaneous emulsification.

Related Literature

Surface cleaning of artworks: structure and dynamics of nanostructured fluids confined in polymeric hydrogel networks

Rosangela Mastrangelo, Costanza Montis, Nicole Bonelli, Paolo Tempesti, Piero Baglioni

2017-06-05 Paper

DOI: 10.1039/C7CP02662E

Ligand displacement induced morphologies in block copolymer/quantum dot hybrids and formation of core–shell hybrid nanoobjects

Sajan Singh, Pratick Samanta, Rajiv Srivastava, Andriy Horechyy, Uta Reuter, Hsin-Lung Chen, Bhanu Nandan

2017-09-28 Paper

DOI: 10.1039/C7CP04343K

Acceleration of diffusion in ethylammonium nitrate ionic liquid confined between parallel glass plates

Oleg I. Gnezdilov, Nicklas Hjalmarsson, Oleg N. Antzutkin, István Furó

2017-09-07 Communication

DOI: 10.1039/C7CP01772C

Temperature dependence of the conversion efficiency of photochromic perylene bisimide dithienylcyclopentene triads embedded in a polymer

Johann Thurn, Johannes Maier, Martti Pärs, Katja Gräf, Mukundan Thelakkat, Jürgen Köhler

2017-09-12 Paper

DOI: 10.1039/C7CP03634E

Using a chitosan nanolayer as an efficient pH buffer to protect pH-sensitive supramolecular assemblies

D. V. Andreeva, A. Kollath, D. V. Sviridov, B. J. Cafferty, H. Möhwald

2017-07-04 Paper

DOI: 10.1039/C7CP02618H

Structural relaxation, viscosity, and network connectivity in a hydrogen bonding liquid

Georg Ehlers, Joerg C. Neuefeind, Souleymane O. Diallo, Christopher B. Stanley, Luke Daemen

2017-07-21 Paper

DOI: 10.1039/C7CP04013J

Relativistic effects at the Cu2O2 core – a density functional theory study

Matthias Witte, Sonja Herres-Pawlis

2017-09-18 Paper

DOI: 10.1039/C7CP04686C

SO3 formation from the X-ray photolysis of SO2 astrophysical ice analogues: FTIR spectroscopy and thermodynamic investigations

Víctor de Souza Bonfim, Roberto Barbosa de Castilho, Leonardo Baptista

2017-09-19 Paper

DOI: 10.1039/C7CP03679E

Self-assembled bundled TiO2 nanowire arrays encapsulated with indium tin oxide for broadband absorption in plasmonic photocatalysis

Xingce Fan, Zhengwei Luo, Xiangyu Hou, Xiaozhi Yang, Teng Qiu, Paul K. Chu

2017-09-14 Paper

DOI: 10.1039/C7CP04196A

Probe-location dependent resonance energy transfer at lipid/water interfaces: comparison between the gel- and fluid-phase of lipid bilayer

Moirangthem Kiran Singh, Mohammad Firoz Khan, Him Shweta, Sobhan Sen

2017-07-10 Paper

DOI: 10.1039/C7CP03108D

You might also like

Compound Q&A

What is 3-Fluoro-2-methylbenzylamine (CAS: 771573-36-5)?

3-Fluoro-2-methylbenzylamine is an organic compound with the CAS number 771573-3...

771573-36-53-Fluoro-2-methylben...
Compound Q&A

Is Tert-butyl 2-(oxetan-3-ylidene)acetate (CAS: 1207175-03-8) safe?

Tert-butyl 2-(oxetan-3-ylidene)acetate is considered safe for its intended uses ...

1207175-03-8Tert-butyl 2-(oxetan...
Compound Q&A

What precautions should be taken when handling 4-Acetyl-2-fluorobenzonitrile (CAS: 214760-18-6)?

Proper personal protective equipment (PPE) such as gloves, goggles, and a lab co...

214760-18-64-Acetyl-2-fluoroben...
Compound Q&A

How is 2-Ethyl-4-methyl-1,3-thiazole (CAS: 15679-12-6) typically synthesized?

2-Ethyl-4-methyl-1,3-thiazole is commonly synthesized via the reaction of thiour...

15679-12-62-Ethyl-4-methyl-1,3...
Compound Q&A

How should 5',5''-([2,2'-Bithiophene]-5,5'-diyl)bis(([1,1':3',1''-terphenyl]-4,4''-dicarboxylic acid)) (CAS: 1227780-71-3) be stored?

This compound should be stored in a cool, dry place away from direct sunlight an...

1227780-71-35',5''''-([2,2'-Bith...
Compound Q&A

What regulatory guidelines apply to L-Lysine Acetate Salt (CAS: 52315-92-1)?

L-Lysine Acetate Salt (CAS: 52315-92-1) is subject to various regulatory guideli...

52315-92-1L-LYSINE ACETATE SAL...
Compound Q&A

Is 6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) safe?

6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) is generally conside...

259793-96-96-Fluoro-3-hydroxy-2...
Compound Q&A

What are the physical and chemical properties of 1,1'-Sulfonylbis(1H-imidazole) (CAS: 7189-69-7)?

1,1'-Sulfonylbis(1H-imidazole) is a crystalline solid with a molecular weight of...

7189-69-71,1'-Sulfonylbis(1H-...
Compound Q&A

What industries use 4-methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5)?

4-Methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5) is primarily used i...

289483-82-54-methyl-7-nitro-1H-...
Compound Q&A

How should waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) be handled?

Waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) should be ...

97753-82-75-Bromo-3-indolyl-be...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.