Probe-location dependent resonance energy transfer at lipid/water interfaces: comparison between the gel- and fluid-phase of lipid bilayer

Literature Information

Publication Date 2017-07-10
DOI 10.1039/C7CP03108D
Impact Factor 3.676
Authors

Moirangthem Kiran Singh, Mohammad Firoz Khan, Him Shweta, Sobhan Sen


View Original

Abstract

Despite significant interest in understanding the role of the local dielectric environment and lipid-bilayer fluidity/rigidity in resonance energy transfer between chromophores at lipid/water interfaces, a comprehensive approach to quantify such environmental dependence on energy transfer is missing – primarily because of the scarcity of suitable probes. Here we present the results on multi-chromophoric Förster resonance energy transfer (FRET) from a series of 4-aminophthalimide-based molecules (4AP-Cn; n = 2–10, 12) of different lipophilicity (donors), which reside at different depths across the lipid/water interfaces, to rhodamine-6G (Rh6G; acceptor) molecules that stay in a water-rich region near the lipid headgroups. We apply steady-state and time-resolved fluorescence spectroscopy, and find that multi-chromophoric FRET from the series of 4AP-Cn donors to the Rh6G acceptor occurs in a peculiar stepwise fashion at the lipid/water interface of a gel-phase (Lβ′) DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) bilayer at room temperature. However, the same donor–acceptor pairs show only subtle but continuous donor-depth-dependent FRET at the lipid/water interface of a fluid-phase (Lα) DOPC (1,2-dioleoyl-sn-glycero-3-phosphocholine) bilayer. These features were found to correlate with the lipid-phase dependent local environmental polarity sensed by 4AP-Cn donors at the interfaces. Molecular dynamics (MD) simulations, combined with experimental results, show that relative depth (and angle) variation of the 4AP-Cn donors and Rh6G acceptor directly controls the FRET efficiencies through fine tuning of the emission and absorption spectra of the donors and acceptor, respectively. The results indicate that the 4AP-Cn probes are well-suited as donors for FRET studies, which allow the FRET parameters at lipid/water interfaces of gel- and fluid-phases of lipid-bilayers to be quantified and compared simultaneously.

Related Literature

A first principles study of spinel ZnFe2O4 for electrode materials in lithium-ion batteries

Haoyue Guo, Yiman Zhang

2017-09-06 Paper

DOI: 10.1039/C7CP04590E

A study on an unusual SN2 mechanism in the methylation of benzyne through nickel-complexation

Makoto Hatakeyama, Koji Ogata, Yuto Sumida, Tomoe Sumida

2017-09-28 Paper

DOI: 10.1039/C7CP04739H

A lipophilic ionic liquid based on formamidinium cations and TFSI: the electric response and the effect of CO2 on the conductivity mechanism

Federico Bertasi, Guinevere A. Giffin, Keti Vezzù, Yaser Abu-Lebdeh, Michel Armand

2017-09-05 Paper

DOI: 10.1039/C7CP02304A

Structural relaxation, viscosity, and network connectivity in a hydrogen bonding liquid

Georg Ehlers, Joerg C. Neuefeind, Souleymane O. Diallo, Christopher B. Stanley, Luke Daemen

2017-07-21 Paper

DOI: 10.1039/C7CP04013J

Formation of titanium dioxide core–shell microcapsules through a binary-phase spray technique

Jonatan Bergek, Björn Elgh, Anders E. C. Palmqvist, Lars Nordstierna

2017-07-31 Paper

DOI: 10.1039/C7CP02571H

The electronic structure of Ag1−xSn1+xSe2 (x = 0.0, 0.1, 0.2, 0.25 and 1.0)

Takanori Wakita, Eugenio Paris, Kaya Kobayashi, Kensei Terashima, Teppei Ueno, Federica Bondino, Luca Olivi, Jun Akimitsu, Yuji Muraoka, Takayoshi Yokoya, Naurang L. Saini

2017-09-22 Paper

DOI: 10.1039/C7CP05369J

Trimethylsilyl hedgehogs – a novel class of super-efficient hydrocarbon surfactants

Adam Czajka, Christopher Hill, Jocelyn Peach, Jonathan C. Pegg, Isabelle Grillo, Frédéric Guittard, Sarah E. Rogers, Masanobu Sagisaka, Julian Eastoe

2017-07-06 Paper

DOI: 10.1039/C7CP02570J

Self-assembly of a nanotube from a black phosphorus nanoribbon on a string of fullerenes at low temperature

Jiao Shi, Ling-Nan Liu, Qing-Hua Qin

2017-08-10 Paper

DOI: 10.1039/C7CP04427E

One-step formulation of nonionic surfactant bicelles (NSBs) by a double-tailed polyglycerol-type nonionic surfactant

Kenji Aramaki, Chikahiro Iwata, Jitendra Mata, Tetsuya Maehara, Daisuke Aburano, Yuichi Sakanishi, Kyuhei Kitao

2017-05-09 Paper

DOI: 10.1039/C7CP02585H

You might also like

Compound Q&A

What is 3-Fluoro-2-methylbenzylamine (CAS: 771573-36-5)?

3-Fluoro-2-methylbenzylamine is an organic compound with the CAS number 771573-3...

771573-36-53-Fluoro-2-methylben...
Compound Q&A

Is Tert-butyl 2-(oxetan-3-ylidene)acetate (CAS: 1207175-03-8) safe?

Tert-butyl 2-(oxetan-3-ylidene)acetate is considered safe for its intended uses ...

1207175-03-8Tert-butyl 2-(oxetan...
Compound Q&A

What precautions should be taken when handling 4-Acetyl-2-fluorobenzonitrile (CAS: 214760-18-6)?

Proper personal protective equipment (PPE) such as gloves, goggles, and a lab co...

214760-18-64-Acetyl-2-fluoroben...
Compound Q&A

How is 2-Ethyl-4-methyl-1,3-thiazole (CAS: 15679-12-6) typically synthesized?

2-Ethyl-4-methyl-1,3-thiazole is commonly synthesized via the reaction of thiour...

15679-12-62-Ethyl-4-methyl-1,3...
Compound Q&A

How should 5',5''-([2,2'-Bithiophene]-5,5'-diyl)bis(([1,1':3',1''-terphenyl]-4,4''-dicarboxylic acid)) (CAS: 1227780-71-3) be stored?

This compound should be stored in a cool, dry place away from direct sunlight an...

1227780-71-35',5''''-([2,2'-Bith...
Compound Q&A

What regulatory guidelines apply to L-Lysine Acetate Salt (CAS: 52315-92-1)?

L-Lysine Acetate Salt (CAS: 52315-92-1) is subject to various regulatory guideli...

52315-92-1L-LYSINE ACETATE SAL...
Compound Q&A

Is 6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) safe?

6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) is generally conside...

259793-96-96-Fluoro-3-hydroxy-2...
Compound Q&A

What are the physical and chemical properties of 1,1'-Sulfonylbis(1H-imidazole) (CAS: 7189-69-7)?

1,1'-Sulfonylbis(1H-imidazole) is a crystalline solid with a molecular weight of...

7189-69-71,1'-Sulfonylbis(1H-...
Compound Q&A

What industries use 4-methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5)?

4-Methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5) is primarily used i...

289483-82-54-methyl-7-nitro-1H-...
Compound Q&A

How should waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) be handled?

Waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) should be ...

97753-82-75-Bromo-3-indolyl-be...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.