Aquatic photolysis of strobilurin fungicide kresoxim-methyl: kinetics, pathways, and effects of adjuvants
Literature Information
Xuewei Zhang, Jing Ye, Zhigang Ni, Xuerui Yang, Yuefei Ji, Jean-Marc Chovelon
Kresoxim-methyl (KM), an extensively used strobilurin fungicide, displays broad-spectrum fungicidal activity. Despite its prevalent application in agriculture and frequent detection in the environment, specific studies on the photolytic fate of KM in natural surface waters are quite limited. To address this, the present study delves into the photochemical transformation of KM under light irradiation using a high-pressure mercury lamp. Photodegradation of KM followed pseudo-first-order kinetics, with a degradation rate constant of 0.067 ± 0.005 h−1, corresponding to a half-life of approximately 10.3 ± 0.7 h, and the quantum yield was estimated to be 6.95 × 10−3. Transient species identification experiments demonstrated the involvement of singlet oxygen (1O2) and singlet (1KM*) and triplet (3KM*) states. Four different photodegradation pathways, i.e., photoisomerization, hydrolysis, hydroxylation, and ether cleavage, were proposed. Toxicity assessments demonstrated that photodegradation effectively reduced the ecotoxicity of KM. Two typical pesticide adjuvants, namely, Tween 20 and sodium dodecylbenzenesulfonate (SDBS), were selected to evaluate their impacts on KM photolysis. While Tween 20 exhibited a remarkable increase in the photodegradation of KM, SDBS showed a concentration dependent behavior, with an inhibitory effect at low concentrations (<200 μM) and promotional effects at higher concentration levels. The present study elucidated the photolytic KM degradation mechanism, as well as its possible inhibition and enhancement, which is of significant importance for evaluating the environmental fate and ecotoxicological risks of KM in sunlit surface waters.
Related Literature
Programmable digital nonvolatile memory behaviors of donor–acceptor polyimides bearing triphenylamine derivatives: effects of substituents
Taek Joon Lee, Yong-Gi Ko, Hung-Ju Yen, Kyungtae Kim, Dong Min Kim, Wonsang Kwon, Suk Gyu Hahm, Guey-Sheng Liou, Moonhor Ree
DOI: 10.1039/C2PY00617K
High molecular weight acrylonitrile–butadiene architectures via a combination of RAFT polymerization and orthogonal copper mediated azide–alkyne cycloaddition
Christoph J. Dürr, Sebastian G. J. Emmerling, Paul Lederhose, Andreas Kaiser, Sven Brandau, Michael Klimpel, Christopher Barner-Kowollik
DOI: 10.1039/C2PY00547F
Self-assembled amino acids and dipeptides as noncovalent hydrogels for tissue engineering
Derek M. Ryan, Bradley L. Nilsson
DOI: 10.1039/C1PY00335F
Controlled biomimetic silica formation using star-shaped poly(l-lysine)
Qinrong Wang, Jun Yu, Yunsong Yan, Shaoqiang Xu, Fangfang Wang, Qingnan Li, Jinzhi Wang, Xin Zhang, Daojun Liu
DOI: 10.1039/C2PY20070H
Facile glycosylation of dendrimers for eliciting specific cell–material interactions
Xiaopeng Liu, Jie Liu, Ying Luo
DOI: 10.1039/C1PY00404B
Highly thermostable rigid-rod networks constructed from an unsymmetrical bisphthalonitrile bearing phthalazinone moieties
Cheng Liu, Xiuping Li, Jinyan Wang, Xigao Jian, Chunyue Pan
DOI: 10.1039/C2PY00417H
Temperature-sensitive nanogels: poly(N-vinylcaprolactam) versus poly(N-isopropylacrylamide)
Jose Ramos, Ainara Imaz, Jacqueline Forcada
DOI: 10.1039/C2PY00485B
Visualization of poly(methyl methacrylate) (PMMA) grafts on cellulose via high-resolution FT-IR microscopy imaging
Susanne Hansson, Thomas Tischer, Anja S. Goldmann, Anna Carlmark, Christopher Barner-Kowollik, Eva Malmström
DOI: 10.1039/C1PY00338K
Synthesis of terpene–poly(ethylene oxide)s by t-BuP4-promoted anionic ring-opening polymerization
Junpeng Zhao, Helmut Schlaad, Steffen Weidner, Markus Antonietti
DOI: 10.1039/C1PY00388G
You might also like
What industries use 4-(4-tert-Butylphenyl)-1H-pyrazol-3-amine (CAS: 1015845-73-4)?
4-(4-tert-Butylphenyl)-1H-pyrazol-3-amine finds applications in various industri...
What industries use H3TATAB (CAS: 63557-10-8)?
H3TATAB is used in the pharmaceutical industry for the synthesis of certain orga...
What are the main uses of 1-Ethyl-3-fluorobenzene (CAS: 696-39-9)?
1-Ethyl-3-fluorobenzene (CAS: 696-39-9) is primarily used as a precursor in the ...
What are the main uses of 1-(tert-Butoxycarbonyl)-4-(4-methoxyphenyl)pyrrolidine-3-carboxylic acid (CAS: 851484-94-1)?
1-(tert-Butoxycarbonyl)-4-(4-methoxyphenyl)pyrrolidine-3-carboxylic acid is prim...
What are the physical and chemical properties of 1-Cyclobutyl-4-piperidinone (CAS: 359880-05-0)?
1-Cyclobutyl-4-piperidinone (CAS: 359880-05-0) is a colorless or white crystalli...
What is Pyridine-2,6-dicarboxylic acid mono-tert-butyl ester (CAS: 575433-76-0)?
Pyridine-2,6-dicarboxylic acid mono-tert-butyl ester (CAS: 575433-76-0) is a che...
What is the market or research trend for 2,3-Difluorophenylalanine (CAS: 236754-62-4)?
The market for 2,3-Difluorophenylalanine (CAS: 236754-62-4) is growing with incr...
How is (2-Hydroxy-1-naphthyl)boronic acid (CAS: 898257-48-2) typically synthesized?
(2-Hydroxy-1-naphthyl)boronic acid can be synthesized through the reduction of 2...
What are the physical and chemical properties of tert-Butyl (5-bromo-6-methyl-3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)pyridin-2-yl)carbamate (CAS: 1315351-28-0)?
This compound is a crystalline solid with a molecular weight of approximately 52...
Are there alternatives to 5,7-Dihydroxy-4-oxo-2-(3,4,5-trihydroxyphenyl)-4H-chromen-3-yl beta-D-glucopyranoside (CAS: 19833-12-6) in synthesis?
While 5,7-Dihydroxy-4-oxo-2-(3,4,5-trihydroxyphenyl)-4H-chromen-3-yl beta-D-gluc...
Source Journal
New Journal of Chemistry

NJC (New Journal of Chemistry) is a broad-based primary journal encompassing all branches of chemistry and its sub-disciplines. It contains full research articles, communications, perspectives and focus articles. This well-established journal, owned by the Centre National de la Recherche Scientifique (CNRS) of France, has been co-published with the Royal Society of Chemistry since January 1998. NJC is the forum for the publication of high-quality, original and significant work that opens new directions in chemistry or other scientific disciplines. In addition to having a significant chemical component, work published in NJC must demonstrate that it will have an impact on areas of research other than that of the reported work.










![N-[2-Bromo-4-(trifluoromethoxy)phenyl]formamide structure N-[2-Bromo-4-(trifluoromethoxy)phenyl]formamide structure](https://static.chemtradehub.com/structs/941/941294-53-7-f783.webp)



