Cationic polymerization of vinyl monomers using halogen bonding organocatalysts with varied activity
Literature Information
Koji Takagi, Hiroto Murakata, Koji Yamauchi, Kohei Hashimoto
By using non-ionic and multidentate halogen bonding organocatalysts, the cationic polymerization of IBVE was investigated to reveal the relationship between the catalytic activity and the substitution pattern of halogen bond donor units with the aid of theoretical calculation. The polymerization successfully proceeded at room temperature using an appropriate catalyst. The polymerization of other vinyl ethers and styrene derivatives was also investigated in the presence of ionic organocatalysts to figure out that the coordination ability of the counter anion significantly affected the catalytic activity. In particular, the polymerization of pMOS occurred in a controlled manner enabling the molecular weight regulation by ca. Mn = 10 000.
Related Literature
Structural and electronic properties of V2O5 and their tuning by doping with 3d elements – modelling using the DFT+U method and dispersion correction
A. S. Dobrota, L. D. Rafailović
DOI: 10.1039/C8CP00992A
“On demand” triggered crystallization of CaCO3 from solute precursor species stabilized by the water-in-oil microemulsion
Teresa Roncal-Herrero, Alejandro Fernandez-Martinez, Adriana Matamoros-Veloza, Roland Kröger
DOI: 10.1039/C8CP00540K
Imaging the ordering of a weakly adsorbed two-dimensional condensate: ambient-pressure microscopy and spectroscopy of CO2 molecules on rutile TiO2(110)
Mausumi Mahapatra, David C. Grinter, Fang Xu, Si Luo, Robert M. Palomino, Shyam Kattel, Iradwikanari Waluyo, Ping Liu, Dario J. Stacchiola, Sanjaya D. Senanayake
DOI: 10.1039/C8CP01614C
Atomistic modeling of La3+ doping segregation effect on nanocrystalline yttria-stabilized zirconia
Shenli Zhang, Haoyan Sha, Ricardo H. R. Castro, Roland Faller
DOI: 10.1039/C8CP02010H
Oxygen-induced high diffusion rate of magnesium dopants in GaN/AlGaN based UV LED heterostructures
Paweł Piotr Michałowski, Sebastian Złotnik, Jakub Sitek, Krzysztof Rosiński, Mariusz Rudziński
DOI: 10.1039/C8CP01470A
Small stoichiometric (MoS2)n clusters with the 1T phase
Ya-Ya Wang, Jia-Jun Deng, Xin Wang, Jian-Tao Che, Xun-Lei Ding
DOI: 10.1039/C7CP07914A
A molecular dynamics study of the complete binding process of meropenem to New Delhi metallo-β-lactamase 1
Juan Duan, Chuncai Hu, Jiafan Guo, Lianxian Guo, Jia Sun, Zuguo Zhao
DOI: 10.1039/C7CP07459J
Isomeric organic semiconductors containing fused-thiophene cores: molecular packing and charge transport
Pei Zhou, Yong Wu, Yanzi Xu, Ying Zhi
DOI: 10.1039/C7CP08567B
Phase equilibrium and physical properties of biobased ionic liquid mixtures
Ariel A. C. Toledo Hijo, Guilherme J. Maximo, Rosiane L. Cunha, Felipe H. S. Fonseca, Lisandro P. Cardoso, Jorge F. B. Pereira, Mariana C. Costa, Eduardo A. C. Batista, Antonio J. A. Meirelles
DOI: 10.1039/C7CP06841G
An insight into the origin of room-temperature ferromagnetism in SnO2 and Mn-doped SnO2 quantum dots: an experimental and DFT approach
Dhamodaran Manikandan, S. Amirthapandian, I. S. Zhidkov, A. I. Kukharenko, S. O. Cholakh, Ramaswamy Murugan
DOI: 10.1039/C7CP07182E
You might also like
What is 3-Fluoro-2-methylbenzylamine (CAS: 771573-36-5)?
3-Fluoro-2-methylbenzylamine is an organic compound with the CAS number 771573-3...
Is Tert-butyl 2-(oxetan-3-ylidene)acetate (CAS: 1207175-03-8) safe?
Tert-butyl 2-(oxetan-3-ylidene)acetate is considered safe for its intended uses ...
What precautions should be taken when handling 4-Acetyl-2-fluorobenzonitrile (CAS: 214760-18-6)?
Proper personal protective equipment (PPE) such as gloves, goggles, and a lab co...
How is 2-Ethyl-4-methyl-1,3-thiazole (CAS: 15679-12-6) typically synthesized?
2-Ethyl-4-methyl-1,3-thiazole is commonly synthesized via the reaction of thiour...
How should 5',5''-([2,2'-Bithiophene]-5,5'-diyl)bis(([1,1':3',1''-terphenyl]-4,4''-dicarboxylic acid)) (CAS: 1227780-71-3) be stored?
This compound should be stored in a cool, dry place away from direct sunlight an...
What regulatory guidelines apply to L-Lysine Acetate Salt (CAS: 52315-92-1)?
L-Lysine Acetate Salt (CAS: 52315-92-1) is subject to various regulatory guideli...
Is 6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) safe?
6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) is generally conside...
What are the physical and chemical properties of 1,1'-Sulfonylbis(1H-imidazole) (CAS: 7189-69-7)?
1,1'-Sulfonylbis(1H-imidazole) is a crystalline solid with a molecular weight of...
What industries use 4-methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5)?
4-Methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5) is primarily used i...
How should waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) be handled?
Waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) should be ...
Source Journal
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.










![(1R,3S,5R)-2-{[(2-Methyl-2-propanyl)oxy]carbonyl}-2-azabicyclo[3.1.0]hexane-3-carboxylic acid structure (1R,3S,5R)-2-{[(2-Methyl-2-propanyl)oxy]carbonyl}-2-azabicyclo[3.1.0]hexane-3-carboxylic acid structure](https://static.chemtradehub.com/structs/197/197142-34-0-6a44.webp)
![2,4,5-Trichloro-7H-pyrrolo[2,3-d]pyrimidine structure 2,4,5-Trichloro-7H-pyrrolo[2,3-d]pyrimidine structure](https://static.chemtradehub.com/structs/105/1053228-28-6-fba3.webp)


