Experimental and modeling study of the oxidation of n-butane in a jet stirred reactor using cw-CRDS measurements

Literature Information

Publication Date 2013-09-17
DOI 10.1039/C3CP53335B
Impact Factor 3.676
Authors

Chiheb Bahrini, Pranay Morajkar, Coralie Schoemaecker, Ophélie Frottier, Olivier Herbinet, Pierre-Alexandre Glaude, Frédérique Battin-Leclerc, Christa Fittschen


View Original

Abstract

The gas-phase oxidation of n-butane has been studied in an atmospheric jet-stirred reactor (JSR) at temperatures up to 950 K. For the first time, continuous wave cavity ring-down spectroscopy (cw-CRDS) in the near-infrared has been used, together with gas chromatography (GC), to analyze the products formed during its oxidation. In addition to the quantification of formaldehyde and water, which is always difficult by GC, cw-CRDS allowed as well the quantification of hydrogen peroxide (H2O2). A comparison of the obtained mole fraction temperature profiles with simulations using a detailed gas-phase mechanism shows a good agreement at temperatures below 750 K, but an overestimation of the overall reactivity above this temperature. Also, a strong overestimation was found for the H2O2 mole fraction at higher temperatures. In order to improve the agreement between model and experimental results, two modifications have been implemented to the model: (a) the rate constant for the decomposition of H2O2 (+M) ↔ 2OH (+M) has been updated to the value recently proposed by Troe (Combust. Flame, 2011, 158, 594–601) and (b) a temperature dependent heterogeneous destruction of H2O2 on the hot reactor walls with assumed rate parameters has been added. The improvement (a) slows down the overall reactivity at higher temperatures, but has a negligible impact on the maximal H2O2 mole fraction. Improvement (b) has also a small impact on the overall reactivity at higher temperatures, but a large effect on the maximal H2O2 mole fraction. Both modifications lead to an improved agreement between model and experiment for the oxidation of n-butane in a JSR at temperatures above 750 K.

Related Literature

Optimization of the RAFT polymerization conditions for the in situ formation of nano-objects via dispersion polymerization in alcoholic medium

Wei Zhao, Guillaume Gody, Siming Dong, Per B. Zetterlund

2014-08-28 Paper

DOI: 10.1039/C4PY00855C

Synthesis of highly reactive polyisobutylene with FeCl3/ether complexes in hexane; kinetic and mechanistic studies

Rajeev Kumar, Priyadarsi De, Bin Zheng, Kuo-Wei Huang, Jack Emert, Rudolf Faust

2014-09-12 Paper

DOI: 10.1039/C4PY01039F

Synthesis and photovoltaic properties of thieno[3,2-b]thiophenyl substituted benzo[1,2-b:4,5-b′]dithiophene copolymers

Zeyun Xiao, Jegadesan Subbiah, Kuan Sun, David J. Jones, Andrew B. Holmes, Wallace W. H. Wong

2014-08-19 Paper

DOI: 10.1039/C4PY00827H

Semi-conjugated acceptor-based polyimides as electrets for nonvolatile transistor memory devices

Lei Dong, Yu-Cheng Chiu, Chu-Chen Chueh, An-Dih Yu, Wen-Chang Chen

2014-08-12 Paper

DOI: 10.1039/C4PY00988F

Bulk AGET ATRP of methyl methacrylate using iron(iii) acetylacetonate as a catalyst

Yuan Liu, Tianchi Xu, Lifen Zhang, Zhenping Cheng, Xiulin Zhu

2014-08-13 Paper

DOI: 10.1039/C4PY00968A

Palladium-catalyzed oxidative direct arylation polymerization (Oxi-DArP) of an ester-functionalized thiophene

Nemal S. Gobalasingham, Sangtaik Noh, Barry C. Thompson

2016-01-19 Paper

DOI: 10.1039/C5PY01973G

Synthesis of 9,9′-spirobifluorene-based conjugated microporous polymers by FeCl3-mediated polymerization

Arindam Modak, Yoshifumi Maegawa, Yasutomo Goto, Shinji Inagaki

2015-12-28 Paper

DOI: 10.1039/C5PY01900A

Photodegradable poly(ester amide)s for indirect light-triggered release of paclitaxel

Abdolrasoul Soleimani, Aneta Borecki

2014-09-09 Paper

DOI: 10.1039/C4PY00996G

Construction of efficacious hepatoma-targeted nanomicelles non-covalently functionalized with galactose for drug delivery

Hao Yu, Yucheng Liu, Xinyu Hu, Junjian Li, Aming Xie, Jianfa Zhang

2014-09-03 Paper

DOI: 10.1039/C4PY01022A

You might also like

Compound Q&A

How should waste containing (6-Bromo-2-naphthyl)oxy](dimethyl)(2-methyl-2-propanyl)silane be handled?

Waste containing (6-Bromo-2-naphthyl)oxy](dimethyl)(2-methyl-2-propanyl)silane (...

100751-65-3[(6-Bromo-2-naphthyl...
Compound Q&A

How is 7-Fluoro-4-isoquinolinecarboxylic acid (CAS: 1841081-40-0) typically synthesized?

7-Fluoro-4-isoquinolinecarboxylic acid can be synthesized via a multi-step proce...

1841081-40-07-Fluoro-4-isoquinol...
Compound Q&A

What are the physical and chemical properties of 2,3,5,6-Tetrabromothieno[3,2-b]thiophene (CAS: 124638-53-5)?

2,3,5,6-Tetrabromothieno[3,2-b]thiophene is a crystalline compound with a high m...

124638-53-52,3,5,6-Tetrabromoth...
Compound Q&A

Is 1-[4-(Benzylamino)-7,8-dihydro-5H-pyrano[4,3-d]pyrimidin-2-yl]-2-methyl-1H-indole-4-carboxamide (CAS: 1542705-92-9) safe?

1-[4-(Benzylamino)-7,8-dihydro-5H-pyrano[4,3-d]pyrimidin-2-yl]-2-methyl-1H-indol...

1542705-92-91-[4-(Benzylamino)-7...
Compound Q&A

What is the market or research trend for imidazo[5,1-d]-1,2,3,5-tetrazine-8-carboxylic acid, 3,4-dihydro-3-methyl-4-oxo- (CAS: 113942-30-6)?

The market for imidazo[5,1-d]-1,2,3,5-tetrazine-8-carboxylic acid, 3,4-dihydro-3...

113942-30-6Imidazo[5,1-d]-1,2,3...
Compound Q&A

What is 3-(Triisopropylsilyl)propiolaldehyde (CAS: 163271-80-5)?

3-(Triisopropylsilyl)propiolaldehyde is a synthetic organic compound with the CA...

163271-80-53-(Triisopropylsilyl...
Compound Q&A

What regulatory guidelines apply to 6-Nitro-2H-1,4-benzoxazin-3(4H)-one (CAS: 81721-87-1)?

6-Nitro-2H-1,4-benzoxazin-3(4H)-one (CAS: 81721-87-1) is subject to various regu...

81721-87-16-Nitro-2H-1,4-benzo...
Compound Q&A

How should waste containing (3-Fluorophenyl)(4-{[(2-methyl-2-propanyl)oxy]carbonyl}-1-piperazinyl)acetic acid (CAS: 885272-91-3) be handled?

Waste containing (3-Fluorophenyl)(4-{[(2-methyl-2-propanyl)oxy]carbonyl}-1-piper...

885272-91-3(3-Fluorophenyl)(4-{...
Compound Q&A

What are the physical and chemical properties of N,N'-4,4'-Biphenyldiyldiisonicotinamide (CAS: 55119-40-9)?

N,N'-4,4'-Biphenyldiyldiisonicotinamide is a white crystalline solid with a mole...

55119-40-9N,N'-4,4'-Biphenyldi...
Compound Q&A

What industries use 6-Bromo-8-fluoro-2-quinazolinol (CAS: 1036756-15-6)?

6-Bromo-8-fluoro-2-quinazolinol is primarily used in the pharmaceutical industry...

1036756-15-66-Bromo-8-fluoro-2-q...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.