Solubility in CO2 and swelling studies by in situIR spectroscopy of vegetable-based epoxidized oils as polyurethane precursors
Literature Information
Stéphanie Foltran, Lise Maisonneuve, Eric Cloutet, Benoit Gadenne, Carine Alfos, Thierry Tassaing, Henri Cramail
The phase behaviour of carbon dioxide/vegetable based epoxidized oil (VBEO) mixtures has been investigated at three different temperatures (40, 70 and 100 °C) and pressures ranging between 0.1 and 20 MPa. The measurements have been performed using an efficient in situFTIR method that allowed us to determine the variation of the concentration of each component in the two phases (CO2 rich phase and VBEO rich phase) as a function of temperature and pressure. Several epoxidized mono-, di- and tri-glyceride derivatives have been tested. The solubility of these epoxidized oils in the CO2 rich phase and the swelling of the VBEO rich phase resulting from the CO2 sorption have been investigated. From these concentration measurements, we could establish the pressure–composition phase diagrams of these VBEO/CO2 binary mixtures. The three studied monoglyceride derivatives were found to be more soluble in CO2 and more easily swelled by CO2 in comparison to the di- and tri-glyceride derivatives. Nevertheless, it was found that a significant amount of CO2 was incorporated in all these VBEO at relatively moderate pressures. Thus, we expect these VBEO to be good candidates for performing carbonation reaction to generate in good yields vegetable-based cyclic carbonates as polyurethane precursors.
Related Literature
Electron transfer within a reaction path model calibrated by constrained DFT calculations: application to mixed-valence organic compounds
A. de la Lande, C. Meier
DOI: 10.1039/C5CP01194A
Effective rate constant for nanostructured heterogeneous catalysts
Leila Rajabi, S. C. Hendy
DOI: 10.1039/C5CP04448K
Realizing diverse electronic and magnetic properties in hybrid zigzag BNC nanoribbons via hydrogenation
Yuanhui Sun, Guangtao Yu, Jingwei Liu, Xiaopeng Shen, Xuri Huang, Wei Chen
DOI: 10.1039/C5CP06069A
A new perspective: imaging the stereochemistry of molecular collisions
F. J. Aoiz, M. Brouard, S. D. S. Gordon, B. Nichols, V. Walpole
DOI: 10.1039/C5CP03273C
In silico characterization of protein partial molecular volumes and hydration shells
Sara Del Galdo, Paolo Marracino, Marco D'Abramo, Andrea Amadei
DOI: 10.1039/C5CP05891K
Long term puzzles of the CH and CD energetics and related phenomena revisited; solutions sought through REMPI-photofragmentations of bromomethanes
Arnar Hafliðason, Huasheng Wang, Ágúst Kvaran
DOI: 10.1039/C5CP06097D
Spectroscopic evidence of ‘jumping and pecking’ of cholinium and H-bond enhanced cation–cation interaction in ionic liquids
Anne Knorr, Koichi Fumino, Anne-Marie Bonsa
DOI: 10.1039/C5CP03412D
S-doped mesoporous nanocomposite of HTiNbO5 nanosheets and TiO2 nanoparticles with enhanced visible light photocatalytic activity
Ruirui Han, Hongmei Ji, Tao Sun, Jin Zhao, Ningna Chen, Jing Chen, Xuefeng Guo, Wenhua Hou, Weiping Ding
DOI: 10.1039/C5CP06555K
Transient low-barrier hydrogen bond in the photoactive state of green fluorescent protein
Marc Nadal-Ferret, Ricard Gelabert, Miquel Moreno
DOI: 10.1039/C5CP01067E
You might also like
What is 3-Fluoro-2-methylbenzylamine (CAS: 771573-36-5)?
3-Fluoro-2-methylbenzylamine is an organic compound with the CAS number 771573-3...
Is Tert-butyl 2-(oxetan-3-ylidene)acetate (CAS: 1207175-03-8) safe?
Tert-butyl 2-(oxetan-3-ylidene)acetate is considered safe for its intended uses ...
What precautions should be taken when handling 4-Acetyl-2-fluorobenzonitrile (CAS: 214760-18-6)?
Proper personal protective equipment (PPE) such as gloves, goggles, and a lab co...
How is 2-Ethyl-4-methyl-1,3-thiazole (CAS: 15679-12-6) typically synthesized?
2-Ethyl-4-methyl-1,3-thiazole is commonly synthesized via the reaction of thiour...
How should 5',5''-([2,2'-Bithiophene]-5,5'-diyl)bis(([1,1':3',1''-terphenyl]-4,4''-dicarboxylic acid)) (CAS: 1227780-71-3) be stored?
This compound should be stored in a cool, dry place away from direct sunlight an...
What regulatory guidelines apply to L-Lysine Acetate Salt (CAS: 52315-92-1)?
L-Lysine Acetate Salt (CAS: 52315-92-1) is subject to various regulatory guideli...
Is 6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) safe?
6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) is generally conside...
What are the physical and chemical properties of 1,1'-Sulfonylbis(1H-imidazole) (CAS: 7189-69-7)?
1,1'-Sulfonylbis(1H-imidazole) is a crystalline solid with a molecular weight of...
What industries use 4-methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5)?
4-Methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5) is primarily used i...
How should waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) be handled?
Waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) should be ...
Source Journal
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.












![[4-Chloro-3-(diethylcarbamoyl)phenyl]boronic acid structure [4-Chloro-3-(diethylcarbamoyl)phenyl]boronic acid structure](https://static.chemtradehub.com/structs/871/871332-68-2-0e3b.webp)

