Antibacterial activity of a dual peptide targeting the Escherichia coli sliding clamp and the ribosome
Literature Information
Christophe André, Florian Veillard, Philippe Wolff, Anne-Marie Lobstein, Guillaume Compain, Clément Monsarrat, Jean-Marc Reichhart, Camille Noûs, Dominique Y. Burnouf, Gilles Guichard, Jérôme E. Wagner
The bacterial processivity factor, or sliding clamp (SC), is a target of choice for new antibacterial drugs development. We have previously developed peptides that target Escherichia coli SC and block its interaction with DNA polymerases in vitro. Here, one such SC binding peptide was fused to a Proline-rich AntiMicrobial Peptide (PrAMP) to allow its internalization into E. coli cells. Co-immunoprecipitation assays with a N-terminally modified bifunctional peptide that still enters the bacteria but fails to interact with the bacterial ribosome, the major target of PrAMPs, demonstrate that it actually interacts with the bacterial SC. Moreover, when compared to SC non-binding controls, this peptide induces a ten-fold higher antibacterial activity against E. coli, showing that the observed antimicrobial activity is linked to SC binding. Finally, an unmodified bifunctional compound significantly increases the survival of Drosophila melanogaster flies challenged by an E. coli infection. Our study demonstrates the potential of PrAMPs to transport antibiotics into the bacterial cytoplasm and validates the development of drugs targeting the bacterial processivity factor of Gram-negative bacteria as a promising new class of antibiotics.
Related Literature
Why genetic modification of lignin leads to low-recalcitrance biomass
Paul Langan, Loukas Petridis
DOI: 10.1039/C4CP05004E
A QM/MM MD study of the pH-dependent ring-opening catalysis and lid motif flexibility in glucosamine 6-phosphate deaminase
Yuan Zhao, Nanhao Chen, Ruibo Wu, Zexing Cao
DOI: 10.1039/C4CP01609B
Evidence of short-range electron transfer of a redox enzyme on graphene oxide electrodes
Marccus V. A. Martins, Andressa R. Pereira, Roberto A. S. Luz, Rodrigo M. Iost, Frank N. Crespilho
DOI: 10.1039/C4CP00452C
Nanoporous dual-electrodes with millimetre extensions: parallelized fabrication and area effects on redox cycling
Martin Hüske
DOI: 10.1039/C4CP01027B
Strain engineering the properties of graphene and other two-dimensional crystals
Mark A. Bissett, Masaharu Tsuji, Hiroki Ago
DOI: 10.1039/C3CP55443K
Plasmonic rod-in-shell nanoparticles for photothermal therapy
Shanshan Wang, Hong Xu, Jian Ye
DOI: 10.1039/C4CP00902A
Sol-flame synthesis of cobalt-doped TiO2 nanowires with enhanced electrocatalytic activity for oxygen evolution reaction
Lili Cai, In Sun Cho, Apurva Mehta, Jiajun He, Chi Hwan Lee, Pratap M. Rao, Yunzhe Feng, Jennifer Wilcox, Fritz B. Prinz, Xiaolin Zheng
DOI: 10.1039/C4CP01748J
Warm white light generation from a single phase Dy3+ doped Mg2Al4Si5O18 phosphor for white UV-LEDs
Zhipeng Ci, Qisheng Sun, Shengchun Qin, Mengxing Sun, Xiaojing Jiang, Xudong Zhang, Yuhua Wang
DOI: 10.1039/C4CP00357H
Ab initio molecular dynamics simulations of water and an excess proton in water confined in carbon nanotubes
Jeffrey K. Clark II, Stephen J. Paddison
DOI: 10.1039/C4CP00415A
Enhancing spectral shifts of plasmon-coupled noble metal nanoparticles for sensing applications
Kristian L. Göeken, Ron Gill
DOI: 10.1039/C4CP03739A
You might also like
What are the main uses of 1-(3-Aminophenyl)-3-[(3R)-1-(3,3-dimethyl-2-oxobutyl)-2-oxo-5-(2-pyridinyl)-2,3-dihydro-1H-1,4-benzodiazepin-3-yl]urea (CAS: 155412-88-7)?
This compound is mainly used as an intermediate in the synthesis of antipsychoti...
How should waste containing 1-(D-Ribofuranosyl)-1,4-dihydro-3-pyridinecarboxamide (CAS: 19132-12-8) be handled?
Waste containing 1-(D-Ribofuranosyl)-1,4-dihydro-3-pyridinecarboxamide (CAS: 191...
What regulatory guidelines apply to 2-Methyl-2-propanyl 3-bromo-3-(hydroxymethyl)-1-azetidinecarboxylate (CAS: 2007919-81-3)?
2-Methyl-2-propanyl 3-bromo-3-(hydroxymethyl)-1-azetidinecarboxylate (CAS: 20079...
What is N-(4-Chloro-2-pyridinyl)acetamide (CAS: 245056-66-0)?
N-(4-Chloro-2-pyridinyl)acetamide (CAS: 245056-66-0) is a chemical compound with...
What is 5-Chloro-2-hydroxybenzoic acid (CAS: 321-14-2)?
5-Chloro-2-hydroxybenzoic acid, also known as 5-chlorosalicylic acid, is an arom...
What precautions should be taken when handling 1,1-Dichloro-1-fluoroethane (CAS: 1717-00-6)?
When handling 1,1-Dichloro-1-fluoroethane (CAS: 1717-00-6), it is important to u...
What are the physical and chemical properties of Fmoc-(2S,3R)-3-phenylpyrrolidine-2-carboxylic acid (CAS: 281655-32-1)?
Fmoc-(2S,3R)-3-phenylpyrrolidine-2-carboxylic acid is a white crystalline solid ...
What are the main uses of 4-Amino-5-bromo-2-pyridinecarboxylic acid (CAS: 1363381-01-4)?
4-Amino-5-bromo-2-pyridinecarboxylic acid is primarily used as a precursor in th...
What precautions should be taken when handling (S)-tert-butyl 2-((2-(4-bromophenyl)-2-oxoethyl)carbamoyl)pyrrolidine-1-carboxylate (CAS: 1007881-98-2)?
Handling this compound should be done with personal protective equipment (PPE) i...
What precautions should be taken when handling 8-bromo-2,2-dimethyl-3,4-dihydro-2H-1,4-benzoxazin-3-one (CAS: 688363-73-7)?
When handling 8-bromo-2,2-dimethyl-3,4-dihydro-2H-1,4-benzoxazin-3-one, use prop...













![4-Chloro-3-(trifluoromethyl)-1H-pyrrolo[2,3-b]pyridine structure 4-Chloro-3-(trifluoromethyl)-1H-pyrrolo[2,3-b]pyridine structure](https://static.chemtradehub.com/structs/869/869335-75-1-a9d0.webp)

![2,6-Di(thiophen-2-yl)dithieno[3,2-b:2',3'-d]thiophene structure 2,6-Di(thiophen-2-yl)dithieno[3,2-b:2',3'-d]thiophene structure](https://static.chemtradehub.com/structs/910/910788-24-8-5b70.webp)