Magnetic energy harvesting with magnetoelectrics: an emerging technology for self-powered autonomous systems
Literature Information
Venkateswarlu Annapureddy, Haribabu Palneedi, Geon-Tae Hwang, Mahesh Peddigari, Dae-Yong Jeong, Woon-Ha Yoon, Kwang-Ho Kim, Jungho Ryu
The deployment of wireless sensor networks (WSNs) for the internet of things (IoT) and remote monitoring devices has made tremendous progress in the last few years. At the same time, energy harvesters are also being developed to satisfy the power requirement of WSNs and other low power consumption electronics, to increase the device operating time and overcome the limitations of conventional electric power supplies, including batteries. Among various resources for energy harvesting, the magnetic noise produced by power transmission infrastructures and associated mechanical vibrations are ubiquitous energy sources that could be converted into electricity by high efficiency energy conversion materials or devices. Electromagnetic energy conversion systems that operate on the principle of Faraday's induction law can provide sufficient power from strong magnetic fields. However, under weak magnetic fields with low frequency such as 50/60 Hz, the power generated from an electromagnetic device is disappointingly small. Alternative energy harvesting technologies with high power density and small device volume/dimensions are obviously necessary for WSNs of IoT. In this review article, the current status and prospects of an emerging magnetic energy harvesting technology, the so-called magneto-mechano-electric (MME) generators, are reviewed. MME generators utilize the magnetoelectric (ME) coupling in composites of piezoelectric and magnetostrictive materials and interaction between the proof magnet mass and magnetic field. Since the piezoelectric phase in the composite also responds to mechanical vibration directly, an ME-based energy harvester can harness energy from both mechanical vibrations and magnetic fields simultaneously. This combination is expected to enhance the total power output and conversion efficiency. The MME generator can be a ubiquitous power source for WSNs, low power electronic devices, and wireless charging systems by harvesting energy from the tiny magnetic fields present as parasitic magnetic noise in an ambient environment.
Related Literature
Self-assembly and friction of glycerol monooleate and its hydrolysis products in bulk and confined non-aqueous solvents
Joshua L. Bradley-Shaw, Philip J. Camp, Peter J. Dowding
DOI: 10.1039/C8CP01785A
Significant effect of Mg-pressure-controlled annealing: non-stoichiometry and thermoelectric properties of Mg2−δSi1−xSbx
Kouta Iwasaki, Masahito Yoshino, Tomoaki Yamada, Takanori Nagasaki
DOI: 10.1039/C8CP04839H
The stabilization mechanism and size effect of nonpolar-to-polar crystallography facet tailored ZnO nano/micro rods via a top-down strategy
Xiangyang Duan, Chao Ma, Wentao Jin, Xiaoman Ma, Su-Huai Wei, Jinying Yu
DOI: 10.1039/C8CP02494D
QM and ONIOM studies on thermally activated delayed fluorescence of copper(i) complexes in gas phase, solution, and crystal
Yuan-Jun Gao, Wen-Kai Chen, Zi-Rui Wang, Wei-Hai Fang, Ganglong Cui
DOI: 10.1039/C8CP03657H
Tuning the photoreactivity of Z-hexatriene photoswitches by substituents – a non-adiabatic molecular dynamics study
Enrico Tapavicza, Travis Thompson, Kenneth Redd, Dan Kim
DOI: 10.1039/C8CP05181J
Dissociative adsorption of a multifunctional compound on a semiconductor surface: a theoretical study of the adsorption of hydroxylamine on Ge(100)
Hyunkyung Park, Do Hwan Kim
DOI: 10.1039/C8CP00246K
Theoretical investigation of M@Pb122− and M@Sn122− Zintl clusters (M = Lrn+, Lun+, La3+, Ac3+ and n = 0, 1, 2, 3)
DOI: 10.1039/C8CP01056K
Shape dependence of thermodynamics of adsorption on nanoparticles: a theoretical and experimental study
Zi-xiang Cui, Ya-nan Feng, Yong-qiang Xue, Juan Zhang, Rong Zhang, Jie Hao, Jia-yi Liu
DOI: 10.1039/C8CP04895A
Electron correlation effects of the ThO and ThS molecules in the spinor basis. A relativistic coupled cluster study of ground and excited states properties
Paweł Tecmer, Cristina E. González-Espinoza
DOI: 10.1039/C8CP00048D
Different scenarios of dynamic coupling in glassy colloidal mixtures
Tatjana Sentjabrskaja, José Ruiz-Franco, Stefan U. Egelhaaf
DOI: 10.1039/C8CP02559B
You might also like
Is 2-(2-chloroacetamido)-3-phenylpropanoic acid (CAS: 7765-11-9) safe?
2-(2-Chloroacetamido)-3-phenylpropanoic acid (CAS: 7765-11-9) is generally consi...
Is 2-(Benzyloxy)-5-bromobenzoic acid (CAS: 62176-31-2) safe?
2-(Benzyloxy)-5-bromobenzoic acid can be handled safely if appropriate precautio...
What is (4-Methyl-1,2,5-oxadiazol-3-yl)methanamine hydrochloride (CAS: 1159825-48-5)?
(4-Methyl-1,2,5-oxadiazol-3-yl)methanamine hydrochloride is a chemical compound ...
What is 2-(5-Hexylthiophen-2-yl)-4,4,5,5-tetramethyl-1,3,2-dioxaborolane (CAS: 917985-54-7)?
2-(5-Hexylthiophen-2-yl)-4,4,5,5-tetramethyl-1,3,2-dioxaborolane (CAS: 917985-54...
Are there alternatives to 4-(8-Methyl-9H-1,3-dioxolo[4,5-h][2,3]benzodiazepin-5-yl)benzenamine (CAS: 102771-26-6) in synthesis?
While 4-(8-Methyl-9H-1,3-dioxolo[4,5-h][2,3]benzodiazepin-5-yl)benzenamine (CAS:...
What is the market or research trend for tert-butyl 3-hydroxy-4,5,7,8-tetrahydro-2H-pyrazolo[3,4-d]azepine-6-carboxylate (CAS: 851376-80-2)?
The market for tert-butyl 3-hydroxy-4,5,7,8-tetrahydro-2H-pyrazolo[3,4-d]azepine...
How should waste containing 3,5-Diamino-1H-pyrazole-4-carbonitrile (CAS: 6844-58-2) be handled?
Waste containing 3,5-Diamino-1H-pyrazole-4-carbonitrile (CAS: 6844-58-2) should ...
How is (6-Fluoro-3-pyridinyl)boronic acid (CAS: 351019-18-6) typically synthesized?
(6-Fluoro-3-pyridinyl)boronic acid can be synthesized through the reaction of 6-...
What industries use Dibenzyl carbonimidoylbiscarbamate (CAS: 10065-79-9)?
Dibenzyl carbonimidoylbiscarbamate (CAS: 10065-79-9) finds applications in vario...
What is the market or research trend for (beta,beta,2,3,4,5,6-~2~H_7_)Phenylalanine (CAS: 74228-83-4)?
The market for (beta,beta,2,3,4,5,6-~2~H_7_)Phenylalanine (CAS: 74228-83-4) is g...












![4-Fluoro-2-(4-{[(3S,4R)-4-(2-hydroxy-2-propanyl)-3-pyrrolidinyl]amino}-6,7-dimethoxy-2-quinazolinyl)phenol hydrochloride (1:1) structure 4-Fluoro-2-(4-{[(3S,4R)-4-(2-hydroxy-2-propanyl)-3-pyrrolidinyl]amino}-6,7-dimethoxy-2-quinazolinyl)phenol hydrochloride (1:1) structure](https://static.chemtradehub.com/structs/143/1431697-96-9-619c.webp)
![N-[2,6-Di(9-anthryl)-4-oxido-8,9,10,11,12,13,14,15-octahydrodinaphtho[2,1-d:1',2'-f][1,3,2]dioxaphosphepin-4-yl]-1,1,1-trifluoromethanesulfonamide structure N-[2,6-Di(9-anthryl)-4-oxido-8,9,10,11,12,13,14,15-octahydrodinaphtho[2,1-d:1',2'-f][1,3,2]dioxaphosphepin-4-yl]-1,1,1-trifluoromethanesulfonamide structure](https://static.chemtradehub.com/structs/122/1227374-64-2-cdb5.webp)

![2-(5-Bromo-1H-pyrrolo[2,3-B]pyridin-3-YL)acetic acid structure 2-(5-Bromo-1H-pyrrolo[2,3-B]pyridin-3-YL)acetic acid structure](https://static.chemtradehub.com/structs/106/1060795-03-0-0589.webp)