Extreme population inversion in the fragments formed by UV photoinduced S–H bond fission in 2-thiophenethiol

Literature Information

Publication Date 2016-03-24
DOI 10.1039/C6CP01593J
Impact Factor 3.676
Authors

Rebecca A. Ingle, Tolga N. V. Karsili, Gregg J. Dennis, Michael Staniforth, Vasilios G. Stavros, Michael N. R. Ashfold


View Original

Abstract

H atom loss following near ultraviolet photoexcitation of gas phase 2-thiophenethiol molecules has been studied experimentally, by photofragment translational spectroscopy (PTS) methods, and computationally, by ab initio electronic structure calculations. The long wavelength (277.5 ≥ λphot ≥ 240 nm) PTS data are consistent with S–H bond fission after population of the first 1πσ* state. The partner thiophenethiyl (R) radicals are formed predominantly in their first excited Ã2A′ state, but assignment of a weak signal attributable to H + R(2A′′) products allows determination of the S–H bond strength, D0 = 27 800 ± 100 cm−1 and the Ö state splitting in the thiophenethiyl radical (ΔE = 3580 ± 100 cm−1). The deduced population inversion between the à and states of the radical reflects the non-planar ground state geometry (wherein the S–H bond is directed near orthogonal to the ring plane) which, post-photoexcitation, is unable to planarise sufficiently prior to bond fission. This dictates that the dissociating molecules follow the adiabatic fragmentation pathway to electronically excited radical products. π* ← π absorption dominates at shorter excitation wavelengths. Coupling to the same 1πσ* potential energy surface (PES) remains the dominant dissociation route, but a minor yield of H atoms attributable to a rival fragmentation pathway is identified. These products are deduced to arise via unimolecular decay following internal conversion to the ground (S0) state PES via a conical intersection accessed by intra-ring C–S bond extension. The measured translational energy disposal shows a more striking change once λphot ≤ 220 nm. Once again, however, the dominant decay pathway is deduced to be S–H bond fission following coupling to the 1πσ* PES but, in this case, many of the evolving molecules are deduced to have sufficiently near-planar geometries to allow passage through the conical intersection at extended S–H bond lengths and dissociation to ground () state radical products. The present data provide no definitive evidence that complete ring opening can compete with fast S–H bond fission following near UV photoexcitation of 2-thiophenethiol.

Related Literature

1,2,3-Trimethoxypropane, a glycerol-based solvent with low toxicity: new utilization for the reduction of nitrile, nitro, ester, and acid functional groups with TMDS and a metal catalyst

Marc Sutter, Leyla Pehlivan, Romain Lafon, Wissam Dayoub, Yann Raoul, Estelle Métay, Marc Lemaire

2013-08-14 Communication

DOI: 10.1039/C3GC41082J

Practical metal-free synthesis of chalcone derivatives via a tandem cross-dehydrogenative-coupling/elimination reaction

Yu Wei, Jinghua Tang, Xuefeng Cong, Xiaoming Zeng

2013-08-27 Communication

DOI: 10.1039/C3GC41403E

Depolymerisation of condensed tannins in ethanol as a gateway to biosourced phenolic synthons

Chahinez Aouf, Eric Dubreucq, Hélène Fulcrand

2013-08-23 Paper

DOI: 10.1039/C3GC41281D

Self-healable polymer networks based on the cross-linking of epoxidised soybean oil by an aqueous citric acid solution

Facundo I. Altuna, Valeria Pettarin, Roberto J. J. Williams

2013-09-09 Paper

DOI: 10.1039/C3GC41384E

AIBN-initiated metal free amidation of aldehydes using N-chloroamines

Rajeshwer Vanjari, Tirumaleswararao Guntreddi, Krishna Nand Singh

2013-10-25 Paper

DOI: 10.1039/C3GC41548A

Nanozeolite clinoptilolite as a highly efficient heterogeneous catalyst for the synthesis of various 2-amino-4H-chromene derivatives in aqueous media

Seyed Meysam Baghbanian, Niloufar Rezaei, Hamed Tashakkorian

2013-09-19 Paper

DOI: 10.1039/C3GC41302K

GAP chemistry for pyrrolyl coumarin derivatives: a highly efficient one-pot synthesis under catalyst-free conditions

Xuecheng Liu, Xian Feng, Zhibin Huang, Daqing Shi

2013-09-25 Communication

DOI: 10.1039/C3GC41799A

High activity and switchable selectivity in the synthesis of cyclic and polymeric cyclohexene carbonates with iron amino triphenolate catalysts

Masoumeh Taherimehr, Syed M. Al-Amsyar, Christopher J. Whiteoak, Paolo P. Pescarmona

2013-08-27 Paper

DOI: 10.1039/C3GC41303A

Tandem ionic liquid antimicrobial toxicity and asymmetric catalysis study: carbonyl-ene reactions with trifluoropyruvate

Rohitkumar G. Gore, Thi-Kim-Thu Truong, Milan Pour, Lauren Myles, Stephen J. Connon, Nicholas Gathergood

2013-08-13 Paper

DOI: 10.1039/C3GC40875B

Metal-free arylations via photochemical activation of the Ar–OSO2R bond in aryl nonaflates

Carlotta Raviola, Veronica Canevari, Stefano Protti, Angelo Albini, Maurizio Fagnoni

2013-07-22 Communication

DOI: 10.1039/C3GC41009A

You might also like

155412-88-71-(3-Aminophenyl)-3-...
Compound Q&A

How should waste containing 1-(D-Ribofuranosyl)-1,4-dihydro-3-pyridinecarboxamide (CAS: 19132-12-8) be handled?

Waste containing 1-(D-Ribofuranosyl)-1,4-dihydro-3-pyridinecarboxamide (CAS: 191...

19132-12-81-(D-Ribofuranosyl)-...
Compound Q&A

What regulatory guidelines apply to 2-Methyl-2-propanyl 3-bromo-3-(hydroxymethyl)-1-azetidinecarboxylate (CAS: 2007919-81-3)?

2-Methyl-2-propanyl 3-bromo-3-(hydroxymethyl)-1-azetidinecarboxylate (CAS: 20079...

2007919-81-32-Methyl-2-propanyl ...
Compound Q&A

What is N-(4-Chloro-2-pyridinyl)acetamide (CAS: 245056-66-0)?

N-(4-Chloro-2-pyridinyl)acetamide (CAS: 245056-66-0) is a chemical compound with...

245056-66-0N-(4-Chloro-2-pyridi...
Compound Q&A

What is 5-Chloro-2-hydroxybenzoic acid (CAS: 321-14-2)?

5-Chloro-2-hydroxybenzoic acid, also known as 5-chlorosalicylic acid, is an arom...

321-14-25-Chloro-2-hydroxybe...
Compound Q&A

What precautions should be taken when handling 1,1-Dichloro-1-fluoroethane (CAS: 1717-00-6)?

When handling 1,1-Dichloro-1-fluoroethane (CAS: 1717-00-6), it is important to u...

1717-00-61,1-Dichloro-1-fluor...
Compound Q&A

What are the physical and chemical properties of Fmoc-(2S,3R)-3-phenylpyrrolidine-2-carboxylic acid (CAS: 281655-32-1)?

Fmoc-(2S,3R)-3-phenylpyrrolidine-2-carboxylic acid is a white crystalline solid ...

281655-32-1Fmoc-(2S,3R)-3-pheny...
Compound Q&A

What are the main uses of 4-Amino-5-bromo-2-pyridinecarboxylic acid (CAS: 1363381-01-4)?

4-Amino-5-bromo-2-pyridinecarboxylic acid is primarily used as a precursor in th...

1363381-01-44-Amino-5-bromo-2-py...
1007881-98-2(S)-tert-butyl 2-((2...
Compound Q&A

What precautions should be taken when handling 8-bromo-2,2-dimethyl-3,4-dihydro-2H-1,4-benzoxazin-3-one (CAS: 688363-73-7)?

When handling 8-bromo-2,2-dimethyl-3,4-dihydro-2H-1,4-benzoxazin-3-one, use prop...

688363-73-78-bromo-2,2-dimethyl...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.