Photoluminescent layered lanthanide–organic framework based on a novel trifluorotriphosphonate organic linker
Literature Information
José A. Fernandes, Duarte Ananias, Luís D. Carlos, João Rocha, João P. C. Tomé, Filipe A. Almeida Paz
A series of fluorinated lanthanide–organic frameworks (LnOFs), formulated as [Ln(H3tftp)(H2O)] [where Ln3+ = La3+ (1), (La0.95Eu0.05)3+ (2), (La0.95Tb0.05)3+ (3) and (La0.94Eu0.03Tb0.03)3+ (4)], has been successfully prepared, under hydrothermal conditions, using the novel ((2,4,6-trifluorobenzene-1,3,5-triyl)tris(methylene))triphosphonic acid (H6tftp) organic ligand and Ln3+ cations as metallic centers. The three-step preparation of the tripodal H6tftp ligand is described. H6tftp and all intermediate molecules involved in the synthesis were fully characterized in the liquid and solid states. While the La3+-based LnOF material was isolated as single-crystals, with its crystal structure being fully described by single-crystal X-ray diffraction, phase identification of the Eu3+- and Tb3+-based materials was performed by powder X-ray diffraction. It is shown that the crystal structure of this isotypical series of materials is based on a neutral two-dimensional ∞2[Ln(H3tftp)(H2O)] coordination polymer placed in the ac plane of the unit cell, exhibiting a uninodal 4-connected square layered topology. It is shown that the most striking and supramolecular relevant interactions are classical O–H⋯O hydrogen bonds within the polymer, further contributing to the structural robustness of the layer. Prepared LnOFs were fully characterized in the solid state using elemental and thermogravimetric analysis, electron microscopy (SEM and EDS) and FT-IR spectroscopy. Compound 1 was further studied using solid-state NMR (31P HPDEC MAS and 13C{1H} CP MAS) and thermodiffractometry. Photoluminescent studies have been performed on the mixed-lanthanide materials 2 and 3.
Related Literature
The ab initio calculation of molecular electric, magnetic and geometric properties
Radovan Bast, Ulf Ekström, Bin Gao, Trygve Helgaker, Kenneth Ruud, Andreas J. Thorvaldsen
DOI: 10.1039/C0CP01647K
Microenvironment-switchable singlet oxygen generation by axially-coordinated hydrophilic ruthenium phthalocyanine dendrimers
Uwe Hahn, Francesca Setaro, Xavier Ragàs, Angus Gray-Weale, Santi Nonell, Tomas Torres
DOI: 10.1039/C0CP01015D
Electrochemical control of adsorption dynamics of surface layer proteins on gold
Christian Zafiu, Günter Trettenhahn, Dietmar Pum, Uwe Bernd Sleytr, Wolfgang Kautek
DOI: 10.1039/C0CP01099E
The role of calcium in membrane condensation and spontaneous curvature variations in model lipidic systems
Anan Yaghmur, Barbara Sartori, Michael Rappolt
DOI: 10.1039/C0CP01036G
Structure and binding of the H4 histone tail and the effects of lysine 16 acetylation
Darren Yang, Gaurav Arya
DOI: 10.1039/C0CP01487G
Factors controlling charge recombination under dark and light conditions in dye sensitised solar cells
Emilio Palomares, Amparo Forneli
DOI: 10.1039/C0CP01855D
Difluoro-boron-triaza-anthracene: a laser dye in the blue region. Theoretical simulation of alternative difluoro-boron-diaza-aromatic systems
Jorge Bañuelos, Fernando López Arbeloa, Virginia Martinez, Marta Liras, Angel Costela, Inmaculada García Moreno, Iñigo López Arbeloa
DOI: 10.1039/C0CP01147A
‘Shape effects’ in metal oxide supported nanoscale goldcatalysts
Matthew B. Boucher, Simone Goergen, Nan Yi, Maria Flytzani-Stephanopoulos
DOI: 10.1039/C0CP02009E
Rh1−xPdxnanoparticle composition dependence in CO oxidation by oxygen: catalytic activity enhancement in bimetallic systems
Dat Tien Hoang, Selim Alayoglu, Zhi Liu
DOI: 10.1039/C0CP01858A
You might also like
What are the main uses of 1H-Indazole-6-carbonitrile (CAS: 141290-59-7)?
1H-Indazole-6-carbonitrile finds applications in pharmaceuticals, where it serve...
How should waste containing Dioctyl (2E)-2-butenedioate (CAS: 2997-85-5) be handled?
Waste containing Dioctyl (2E)-2-butenedioate (CAS: 2997-85-5) should be collecte...
What industries use Sodium [(1,2-benzoxazol-3-ylmethyl)sulfonyl]azanide (CAS: 68291-98-5)?
Sodium [(1,2-benzoxazol-3-ylmethyl)sulfonyl]azanide is primarily used in pharmac...
Are there alternatives to Dimethyl 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-2,6-pyridinedicarboxylate (CAS: 741709-66-0) in synthesis?
Dimethyl 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-2,6-pyridinedicarboxyla...
How should waste containing 2-Fluoro-6-hydrazinopyridine (CAS: 80714-39-2) be handled?
Waste containing 2-Fluoro-6-hydrazinopyridine (CAS: 80714-39-2) should be manage...
What is 6-Formyl-2-pyridinecarboxylic acid (CAS: 499214-11-8)?
6-Formyl-2-pyridinecarboxylic acid is an organic compound with the molecular for...
What is the market or research trend for 3-(3,4-dimethoxyphenyl)-2,5-dimethyl-N-(2-morpholin-4-ylethyl)pyrazolo[1,5-a]pyrimidin-7-amine (CAS: 900874-91-1)?
Research trends for this compound indicate a focus on its potential applications...
How is 9H-Tribenzo[b,d,f]azepine (CAS: 29875-73-8) typically synthesized?
9H-Tribenzo[b,d,f]azepine is typically synthesized via a multi-step process invo...
How is 1-Cyclopropyl-7-ethoxy-6-fluoro-8-methoxy-4-oxo-1,4-dihydro-3-quinolinecarboxylic acid (CAS: 1797982-51-4) typically synthesized?
1-Cyclopropyl-7-ethoxy-6-fluoro-8-methoxy-4-oxo-1,4-dihydro-3-quinolinecarboxyli...
How should waste containing Methyl 3-oxo-1,2,3,4-tetrahydro-6-quinoxalinecarboxylate (CAS: 671820-52-3) be handled?
Waste containing Methyl 3-oxo-1,2,3,4-tetrahydro-6-quinoxalinecarboxylate (CAS: ...
Source Journal
CrystEngComm

CrystEngComm is the forum for the design and understanding of crystalline materials. We welcome studies on the investigation of molecular behaviour within crystals, control of nucleation and crystal growth, engineering of crystal structures, and construction of crystalline materials with tuneable properties and functions. We publish hypothesis-driven research into… how crystal design affects thermodynamics, phase transitional behaviours, polymorphism, morphology control, solid state reactivity (crystal-crystal solution-crystal, and gas-crystal reactions), optoelectronics, ferroelectric materials, non-linear optics, molecular and bulk magnetism, conductivity and quantum computing, catalysis, absorption and desorption, and mechanical properties. Using Techniques and methods including… Single crystal and powder X-ray, electron, and neutron diffraction, solid-state spectroscopy, spectrometry, and microscopy, modelling and data mining, and empirical, semi-empirical and ab-initio theoretical evaluations. On crystalline and solid-state materials. We particularly welcome work on MOFs, coordination polymers, nanocrystals, host-guest and multi-component molecular materials. We also accept work on peptides and liquid crystals. All papers should involve the use or development of a design or optimisation strategy. Routine structural reports or crystal morphology descriptions, even when combined with an analysis of properties or potential applications, are generally considered to be outside the scope of the journal and are unlikely to be accepted.













![(1S)-1,5-Anhydro-1-[3-(1-benzothiophen-2-ylmethyl)-4-fluorophenyl]-D-glucitol structure (1S)-1,5-Anhydro-1-[3-(1-benzothiophen-2-ylmethyl)-4-fluorophenyl]-D-glucitol structure](https://static.chemtradehub.com/structs/761/761423-87-4-dbeb.webp)
