Theoretical and experimental determination of the electronic structure of V2O5, reduced V2O5−x and sodium intercalated NaV2O5

Literature Information

Publication Date 2007-03-21
DOI 10.1039/B612489E
Impact Factor 3.676
Authors

Stefan Laubach, Peter C. Schmidt, Andreas Thißen, Francisco Javier Fernandez-Madrigal, Qi-Hui Wu, Wolfram Jaegermann, Matthias Klemm, Siegfried Horn


View Original

Abstract

In this work the electronic structure of V2O5, reduced V2O5−x (V16O39) and sodium intercalated NaV2O5 has been studied by both theoretical and experimental methods. Theoretical band structure calculations have been performed using density functional methods (DFT). We have investigated the electron density distribution of the valence states, the total density of states (total DOS) and the partial valence band density of states (PVBDOS). Experimentally, amorphous V2O5 thin films have been prepared by physical vapour deposition (PVD) on freshly cleaved highly oriented pyrolytic graphite (HOPG) substrates at room temperature with an initial oxygen understoichiometry of about 4%, resulting in a net stoichiometry of V2O4.8. These films have been intercalated by sodium using vacuum deposition with subsequent spontaneous intercalation (NaV2O5) at room temperature. Resonant V3p–V3d photoelectron spectroscopy (ResPES) experiments have been performed to determine the PVBDOS focusing on the calculation of occupation numbers and the determination of effective oxidation state, reflecting ionicity and covalency of the V–O bonds. Using X-ray absorption near edge spectra (XANES) an attempt is made to visualize the changes in the unoccupied DOS due to sodium intercalation. For comparison measurements on nearly stoichiometric V2O5 single crystals have been performed. The experimental data for the freshly cleaved and only marginally reduced V2O5 single crystals and the NaV2O5 results are in good agreement with the calculated values. The ResPES results for V2O4.8 agree in principle with the calculations, but the trends in the change of the ionicity differ between experiment and theory. Experimentally we find partly occupied V 3d states above the oxygen 2p-like states and a band gap between these and the unoccupied states. In theory one finds this occupation scheme assuming oxygen vacancies in V2O5 and by performing a spin-polarized calculation of an antiferromagnetic ordered NaV2O5.

Related Literature

Facile synthesis of well-controlled poly(1-vinyl imidazole) by the RAFT process

Bo Fan, Jing Wan, Alasdair McKay, Zhenyuan Qu, San H. Thang

2020-07-28 Paper

DOI: 10.1039/D0PY00985G

Folded amphiphilic homopolymer micelles in water: uniform self-assembly beyond amphiphilic random copolymers

Yoshihiko Kimura, Makoto Ouchi, Takaya Terashima

2020-07-06 Paper

DOI: 10.1039/D0PY00685H

Intrinsic flame retardant phosphonate-based vitrimers as a recyclable alternative for commodity polymers in composite materials

Jens C. Markwart, Alexander Battig, Tobias Urbaniak, Katharina Haag, Katharina Koschek, Bernhard Schartel, Frederik R. Wurm

2020-06-08 Paper

DOI: 10.1039/D0PY00275E

One-pot synthesis of amphiphilic multiblock poly(2-oxazoline)s via para-fluoro-thiol click reactions

Tieshuai Zhao, Ben Drain, Gokhan Yilmaz, C. Remzi Becer

2021-09-20 Paper

DOI: 10.1039/D1PY00944C

Architecture transition of supramolecular polymers through hierarchical self-assembly: from supramolecular polymers to fluorescent materials

Riqiang Li, Wenzhuo Chen, Ying Yang, Hui Li, Fenfen Xu, Zhaozhao Duan, Tongxiang Liang, Herui Wen, Wei Tian

2020-07-30 Paper

DOI: 10.1039/D0PY00829J

Ring opening polymerization of macrocyclic oligoesters derived from renewable sources

Antxon Martínez de Ilarduya, Sebastián Muñoz Guerra

2020-03-17 Review Article

DOI: 10.1039/D0PY00258E

Nanoengineering with RAFT polymers: from nanocomposite design to applications

Wentao Peng, Yingying Cai, Luise Fanslau, Philipp Vana

2021-10-20 Review Article

DOI: 10.1039/D1PY01172C

Single-chain crosslinked polymers via the transesterification of folded polymers: from efficient synthesis to crystallinity control

Daiki Ito, Yoshihiko Kimura, Makoto Ouchi, Takaya Terashima

2020-07-07 Paper

DOI: 10.1039/D0PY00758G

Cross-linker control of vitrimer flow

Bassil M. El-Zaatari, Jacob S. A. Ishibashi, Julia A. Kalow

2020-04-08 Paper

DOI: 10.1039/D0PY00233J

You might also like

Compound Q&A

What is the market or research trend for N-(4-Methoxybenzyl)-2-pyridinamine (CAS: 52818-63-0)?

N-(4-Methoxybenzyl)-2-pyridinamine (CAS: 52818-63-0) is increasingly being used ...

52818-63-0N-(4-Methoxybenzyl)-...
Compound Q&A

What precautions should be taken when handling Ethyl 4-(2-chlorophenyl)-1,3-thiazole-2-carboxylate (CAS: 1050507-06-6)?

When handling Ethyl 4-(2-chlorophenyl)-1,3-thiazole-2-carboxylate, appropriate p...

1050507-06-6Ethyl 4-(2-chlorophe...
Compound Q&A

What regulatory guidelines apply to diethyldiselane (CAS: 628-39-7)?

Diethyldiselane (CAS: 628-39-7) is classified under the Globally Harmonized Syst...

628-39-7Diethyldiselane
Compound Q&A

What is the market or research trend for oxocopper (CAS: 12053-18-8)?

The market for oxocopper (CAS: 12053-18-8) is primarily driven by its use in cat...

12053-18-8oxocopper; oxo-(oxoc...
Compound Q&A

What is the market or research trend for 5-{[(2-Methyl-2-propanyl)oxy]carbonyl}-5-azaspiro[2.4]heptane-7-carboxylic acid?

The market for 5-{[(2-Methyl-2-propanyl)oxy]carbonyl}-5-azaspiro[2.4]heptane-7-c...

1268519-54-55-{[(2-Methyl-2-prop...
Compound Q&A

What is 2-(1-Pyrrolidinyl)-4-pyridinamine (CAS: 35981-63-6)?

2-(1-Pyrrolidinyl)-4-pyridinamine is a chemical compound with the CAS number 359...

35981-63-62-(1-Pyrrolidinyl)-4...
Compound Q&A

What are the physical and chemical properties of 2-(3-Pyridinyl)-1-azabicyclo[2.2.2]octane (CAS: 91556-75-1)?

2-(3-Pyridinyl)-1-azabicyclo[2.2.2]octane (CAS: 91556-75-1) is a crystalline sol...

91556-75-12-(3-Pyridinyl)-1-az...
Compound Q&A

How is (S)-Alpha-allyl-proline hydrochloride (CAS: 129704-91-2) typically synthesized?

(S)-Alpha-allyl-proline hydrochloride is usually synthesized via a Wittig reacti...

129704-91-2(S)-Alpha-allyl-prol...
Compound Q&A

What is 3-Methyl-1,2-oxazole-5-carboxylic acid (CAS: 4857-42-5)?

3-Methyl-1,2-oxazole-5-carboxylic acid (CAS: 4857-42-5) is an organic compound w...

4857-42-53-Methyl-1,2-oxazole...
Compound Q&A

How is Lys-SMCC-DM1 (CAS: 1281816-04-3) typically synthesized?

Lys-SMCC-DM1 is synthesized via a multi-step process involving the coupling of S...

1281816-04-3Lys-SMCC-DM1

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.