Computational determination of the enthalpy of formation of alkylthial S-oxides and alkylthione S-oxides: a study of (Z)-propanethial-S-oxide, the lachrymatory factor of the onion (Allium cepa)

Literature Information

Publication Date 2002-08-20
DOI 10.1039/B204643A
Impact Factor 3.676
Authors

Martina Kieninger, Oscar N. Ventura


View Original

Abstract

A general computation procedure for the determination of unknown enthalpies of formation of alkylthial or alkylthione S-oxides, based on the recent accurate determination of the enthalpy of formation of methanethial S-oxide, is proposed. The method relies on the use of isodesmic reactions involving the sulfoxide and sulfide of the species of interest, with the individual energies calculated at the CBS-QB3 level. A discussion is given about the convenience of using density functional theory (DFT) instead of the CBS-QB3 model chemistry, especially for large compounds. To exemplify the method, the enthalpies of formation of ethanethial-S-oxide (−74.7 ± 8.4 kJ mol−1), propanethione-S-oxide (−112.1 ± 8.4 kJ mol−1) and propanethial-S-oxide (−94.1 ± 8.4 kJ mol−1) are calculated, as well as those of the necessary sulfides propanethial (50.4 ± 8.4 kJ mol−1) and propanethione (28.0 ± 8.4 kJ mol−1). These values were derived on the basis of an independent theoretical estimation of the enthalpy of formation of thioformaldehyde (113.2 ± 4.2 kJ mol−1, in agreement with the experimental value, 118 ± 8.4 kJ mol−1). The use of the same method for evaluating the enthalpy of formation of ethanethial however, gave 68.1 ± 4.2 kJ mol−1, higher than the experimental value, 50 ± 8 kJ mol−1. Convincing evidence is given that the theoretical estimation should be preferred to the experimental one in this case. Moreover, it was determined that the most stable isomer of propanethial S-oxide is in fact the Z-conformer, where the terminal methyl group is about 120° out of the plane of the CSO group. However, the CS and CH–CH2– bond lengths are very different from the recent experimental determination. A comparison with the experimental and theoretical results for the lower members of the series suggests that the model assumed for deriving the bond lengths from the microwave spectrum may be at fault. The whole process is validated by comparison of the enthalpies of formation of thioaldehydes and thioketones to the known enthalpies of formation of aldehydes and ketones.

Related Literature

Fabrication of two-dimensionally ordered macroporous silica materials with controllable dimensions

Mandakini Kanungo, Maryanne M. Collinson

2004-02-04 Communication

DOI: 10.1039/B311936J

The kinetics of propene and hexenepolymerisation with [(SBI)ZrR]+X−: evidence for monomer-dependent early or late transition states

Fuquan Song, Roderick D. Cannon, Manfred Bochmann

2004-02-05 Communication

DOI: 10.1039/B314845A

New magnetically responsive polydicarbazole-magnetite nanoparticles

Jean-Paul Lellouche, Nurit Perlman, Augustine Joseph, Senthil Govindaraji, Ludmila Buzhansky, Aline Yakir, Ian Bruce

2004-02-06 Communication

DOI: 10.1039/B309375A

Noncontact two-color luminescence thermometry based on intramolecular luminophore cyclization within an ionic liquid

Gary A. Baker, Sheila N. Baker, T. Mark McCleskey

2003-10-30 Communication

DOI: 10.1039/B310459C

Carbon nanotube conducting arrays by consecutive amidation reactions

Dae-Hwan Jung, Young Koan Ko, Seung Joo Seo, Hee-Tae Jung

2004-02-05 Communication

DOI: 10.1039/B315348G

Surface energy and surface area measurements by 19F MAS NMR of adsorbed trifluoroacetic acid

Vitaliy L. Budarin, James H. Clark, Stewart J. Tavener

2004-02-05 Communication

DOI: 10.1039/B315005D

The first general method for α-trifluoromethylation of carboxylic acids using BrF3

Aviv Hagooly, Shlomo Rozen

2004-02-09 Communication

DOI: 10.1039/B315705A

Template-free synthesis of single-crystalline cadmium nanotubes

Pingàn Hu, Yunqi Liu, Lei Fu, Lingchao Cao, Daoben Zhu

2004-02-04 Communication

DOI: 10.1039/B312708G

Large macroscopic size changes in chemomechanical polymers with binding sites for metal ions

Hans-Jörg Schneider, Tianjun Liu

2003-11-13 Communication

DOI: 10.1039/B310939A

You might also like

Compound Q&A

How should waste containing 2-Ethyl-4-Methyl-1H-Imidazole-5-Carbaldehyde (CAS: 88634-80-4) be handled?

Waste containing 2-Ethyl-4-Methyl-1H-Imidazole-5-Carbaldehyde (CAS: 88634-80-4) ...

88634-80-42-Ethyl-4-Methyl-1H-...
Compound Q&A

What industries use Triethoxy(octyl)silane (CAS: 1385031-14-0)?

Triethoxy(octyl)silane (CAS: 1385031-14-0) is widely used in the pharmaceuticals...

1385031-14-0Triethoxy(octyl)sila...
Compound Q&A

Are there alternatives to 3-iodo-7-nitro-1H-indazole (CAS: 864724-64-1) in synthesis?

Several alternatives to 3-iodo-7-nitro-1H-indazole (CAS: 864724-64-1) exist in t...

864724-64-13-iodo-7-nitro-1H-in...
Compound Q&A

Are there alternatives to Benzene, bis[(trimethoxysilyl)ethyl] (CAS: 266317-71-9) in synthesis?

Yes, there are alternatives to Benzene, bis[(trimethoxysilyl)ethyl] (CAS: 266317...

266317-71-9Benzene, bis[(trimet...
Compound Q&A

Is Isothiazole-3-carbonitrile (CAS: 1452-17-1) safe?

Isothiazole-3-carbonitrile (CAS: 1452-17-1) is generally considered safe when us...

1452-17-1Isothiazole-3-carbon...
Compound Q&A

Is (3-Chlorophenyl)methanol (CAS: 873-63-2) safe?

(3-Chlorophenyl)methanol (CAS: 873-63-2) is considered low to moderately toxic. ...

873-63-2(3-Chlorophenyl)meth...
Compound Q&A

How is (2S,3S)-2-Hydroxy-3-({[(2-methyl-2-propanyl)oxy]carbonyl}amino)-3-(2-naphthyl)propanoic acid (CAS: 959583-98-3) typically synthesized?

(2S,3S)-2-Hydroxy-3-({[(2-methyl-2-propanyl)oxy]carbonyl}amino)-3-(2-naphthyl)pr...

959583-98-3(2S,3S)-2-Hydroxy-3-...
Compound Q&A

What precautions should be taken when handling Methyl 2-(bromomethyl)-5-methoxybenzoate (CAS: 788081-99-2)?

Proper handling of methyl 2-(bromomethyl)-5-methoxybenzoate requires the use of ...

788081-99-2Methyl 2-(bromomethy...
Compound Q&A

What is 6,8-Dibromoimidazo[1,2-a]pyridine-2-carboxylic acid (CAS: 904805-36-3)?

6,8-Dibromoimidazo[1,2-a]pyridine-2-carboxylic acid (CAS: 904805-36-3) is an aro...

904805-36-36,8-Dibromoimidazo[1...
Compound Q&A

Is 3-Amino-5-bromo-2-pyridinecarbonitrile (CAS: 573675-27-1) safe?

3-Amino-5-bromo-2-pyridinecarbonitrile is considered safe when handled under pro...

573675-27-13-Amino-5-bromo-2-py...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.