OH-initiated oxidation of benzene Part II.Influence of elevated NOx concentrations

Literature Information

Publication Date 2002-08-13
DOI 10.1039/B204398J
Impact Factor 3.676
Authors

Björn Klotz, Rainer Volkamer, Michael D. Hurley, Mads P. Sulbaek Andersen, Ole John Nielsen, Ian Barnes, Takashi Imamura, Klaus Wirtz, Karl-Heinz Becker, Ulrich Platt, Timothy J. Wallington, Nobuaki Washida


View Original

Abstract

The present work represents a continuation of part I of this series of papers, in which we investigated the phenol yields in the OH-initiated oxidation of benzene under conditions of low to moderate concentrations of NOx, to elevated NOx levels. The products of the OH-initiated oxidation of benzene in 700–760 Torr of N2/O2 diluent at 297 ± 4 K were investigated in 3 different photochemical reaction chambers. In situ spectroscopic techniques were employed for the detection of products, and the initial concentrations of benzene, NOx, and O2 were widely varied (by factors of 6300, 1500, and 13, respectively). In contrast to results from previous studies, a pronounced dependence of the product distribution on the NOx concentration was observed. The phenol yield decreases from approximately 50–60% in the presence of low concentrations (<5 ppb) of NOx to values below 5% in the presence of extremely high (>10 000 ppb) NOx concentrations. In the presence of high concentrations of NOx, the phenol yield increases with increasing O2 partial pressure. The rate constant of the reaction of hydroxycyclohexadienyl peroxyl radicals with NO was determined to be (1.7 ± 0.6) × 10−11 cm3 molecule−1 s−1. This reaction leads to the formation of E,E-2,4-hexadienedial as the main identifiable product (29 ± 16%). The reaction of the hydroxycyclohexadienyl radical with NO2 gave phenol (5.9 ± 3.4%) and E,E-2,4-hexadienedial (3.4 ± 1.9%), no other products could be identified. The residual FTIR product spectra indicate the formation of unknown nitrates or other nitrogen-containing species in high yield. The results from the present work also show that experimental studies aimed at establishing/verifying chemical mechanisms for aromatic hydrocarbons must be performed using NOx levels which are representative of those found in the atmosphere.

Related Literature

Carbon nanotube conducting arrays by consecutive amidation reactions

Dae-Hwan Jung, Young Koan Ko, Seung Joo Seo, Hee-Tae Jung

2004-02-05 Communication

DOI: 10.1039/B315348G

Easy access to diastereomerically pure platinacycles

Concepción López, Amparo Caubet, Sonia Pérez, Xavier Solans, Mercè Font-Bardía

2004-01-27 Communication

DOI: 10.1039/B315157C

Ns strategies: a highly versatile synthetic method for amines

Toshiyuki Kan, Tohru Fukuyama

2003-11-25 Feature Article

DOI: 10.1039/B311203A

Surface energy and surface area measurements by 19F MAS NMR of adsorbed trifluoroacetic acid

Vitaliy L. Budarin, James H. Clark, Stewart J. Tavener

2004-02-05 Communication

DOI: 10.1039/B315005D

Dehydropolymerization of arylsilanes catalyzed by a novel silylmolybdenum complex

Makoto Minato, Takaomi Matsumoto, Miyuki Ichikawa, Takashi Ito

2003-11-03 Communication

DOI: 10.1039/B310663M

Pore size effects in the pyrolysis of 1,3-diphenylpropane confined in mesoporous silicas

Michelle K. Kidder, Phillip F. Britt, Zongtao Zhang, Sheng Dai, A. C. Buchanan, III

2003-10-15 Communication

DOI: 10.1039/B310405B

A novel water-soluble and self-doped conducting polyaniline graft copolymer

Woo Jin Bae, Keon Hyeong Kim, Yun Heum Park, Won Ho Jo

2003-10-09 Communication

DOI: 10.1039/B309346H

Nickel-catalyzed highly chemoselective cocyclotrimerization of arynes with allenes: a novel method for 10-methylene-9,10-dihydrophenanthrenes

Jen-Chieh Hsieh, Dinesh Kumar Rayabarapu, Chien-Hong Cheng

2004-02-04 Communication

DOI: 10.1039/B315795D

Room-temperature one-step immobilization of rod-like helical polymer onto hydrophilic substrates

Guangqing Guo, Masanobu Naito, Michiya Fujiki, Anubhav Saxena, Kento Okoshi, Yonggang Yang, Masaaki Ishikawa, Takahiro Hagihara

2004-01-07 Communication

DOI: 10.1039/B310985B

Mesocellular polymer foams with unprecedented uniform large mesopores and high surface areas

Jinwoo Lee, Jaeyun Kim, Sang-Wook Kim, Chae-Ho Shin, Taeghwan Hyeon

2004-02-06 Communication

DOI: 10.1039/B310713B

You might also like

Compound Q&A

How should waste containing 2-Ethyl-4-Methyl-1H-Imidazole-5-Carbaldehyde (CAS: 88634-80-4) be handled?

Waste containing 2-Ethyl-4-Methyl-1H-Imidazole-5-Carbaldehyde (CAS: 88634-80-4) ...

88634-80-42-Ethyl-4-Methyl-1H-...
Compound Q&A

What industries use Triethoxy(octyl)silane (CAS: 1385031-14-0)?

Triethoxy(octyl)silane (CAS: 1385031-14-0) is widely used in the pharmaceuticals...

1385031-14-0Triethoxy(octyl)sila...
Compound Q&A

Are there alternatives to 3-iodo-7-nitro-1H-indazole (CAS: 864724-64-1) in synthesis?

Several alternatives to 3-iodo-7-nitro-1H-indazole (CAS: 864724-64-1) exist in t...

864724-64-13-iodo-7-nitro-1H-in...
Compound Q&A

Are there alternatives to Benzene, bis[(trimethoxysilyl)ethyl] (CAS: 266317-71-9) in synthesis?

Yes, there are alternatives to Benzene, bis[(trimethoxysilyl)ethyl] (CAS: 266317...

266317-71-9Benzene, bis[(trimet...
Compound Q&A

Is Isothiazole-3-carbonitrile (CAS: 1452-17-1) safe?

Isothiazole-3-carbonitrile (CAS: 1452-17-1) is generally considered safe when us...

1452-17-1Isothiazole-3-carbon...
Compound Q&A

Is (3-Chlorophenyl)methanol (CAS: 873-63-2) safe?

(3-Chlorophenyl)methanol (CAS: 873-63-2) is considered low to moderately toxic. ...

873-63-2(3-Chlorophenyl)meth...
Compound Q&A

How is (2S,3S)-2-Hydroxy-3-({[(2-methyl-2-propanyl)oxy]carbonyl}amino)-3-(2-naphthyl)propanoic acid (CAS: 959583-98-3) typically synthesized?

(2S,3S)-2-Hydroxy-3-({[(2-methyl-2-propanyl)oxy]carbonyl}amino)-3-(2-naphthyl)pr...

959583-98-3(2S,3S)-2-Hydroxy-3-...
Compound Q&A

What precautions should be taken when handling Methyl 2-(bromomethyl)-5-methoxybenzoate (CAS: 788081-99-2)?

Proper handling of methyl 2-(bromomethyl)-5-methoxybenzoate requires the use of ...

788081-99-2Methyl 2-(bromomethy...
Compound Q&A

What is 6,8-Dibromoimidazo[1,2-a]pyridine-2-carboxylic acid (CAS: 904805-36-3)?

6,8-Dibromoimidazo[1,2-a]pyridine-2-carboxylic acid (CAS: 904805-36-3) is an aro...

904805-36-36,8-Dibromoimidazo[1...
Compound Q&A

Is 3-Amino-5-bromo-2-pyridinecarbonitrile (CAS: 573675-27-1) safe?

3-Amino-5-bromo-2-pyridinecarbonitrile is considered safe when handled under pro...

573675-27-13-Amino-5-bromo-2-py...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.