Branching ratios and incubation times in the thermal decomposition of methyl radicals: Experiments and theory

Literature Information

Publication Date 2001-04-30
DOI 10.1039/B100983O
Impact Factor 3.676
Authors

Ronald A. Eng, Andreas Gebert, Elke Goos, Horst Hippler, Chatuna Kachiani


View Original

Abstract

The thermal decomposition of methyl radicals proceeds ia two competitive channels: with an energy difference of about 13 kJ mol−1 favoring the CH and H2 channel (R1). In the low-pressure regime only the reaction channel with the lowest threshold should be open, while with increasing total pressure the channel with the higher threshold may compete. Collisional transfer of both energy and angular momentum controls this competition in the fall-off range. We investigated the thermal decomposition of methyl radicals behind reflected as well as behind incident shock waves at pressures between 100 and 4800 mbar and temperatures between 2000 and 4000 K. The CH3 radicals were prepared by thermal decomposition of a few ppm of two different precursor molecules, azomethane and acetone, respectively, diluted in argon. The formation of H atoms during the decomposition was detected by atomic-resonance-absorption spectroscopy (ARAS) at 121.6 nm. We found pronounced incubation times in the H atom formation when the unimolecular decomposition of methyl radicals follows the very fast decomposition of the methyl precursor under identical shock wave conditions. We observed unexpectedly high H atom yields leading to branching ratios up to 70% for the channel (R2), depending on the experimental conditions. Both, the observed incubation times as well as the branching ratios in the methyl decomposition were analyzed in terms of master equation modeling using statistical unimolecular rate theories for the decomposition channels and a simple model for collisional energy transfer.

Related Literature

Local electronic structure of aqueous zinc acetate: oxygen K-edge X-ray absorption and emission spectroscopy on micro-jets

Edlira Suljoti, Kai F. Hodeck, Kathrin M. Lange, Mikhail A. Soldatov

2013-04-17 Communication

DOI: 10.1039/C3CP50686J

The chemical sensitivity of X-ray spectroscopy: high energy resolution XANESversusX-ray emission spectroscopy of substituted ferrocenes

Andrew J. Atkins, Matthias Bauer, Christoph R. Jacob

2013-04-12 Paper

DOI: 10.1039/C3CP50999K

Synthesis of chemically pure, luminescent Eu3+ doped HAp nanoparticles: a promising fluorescent probe for in vivo imaging applications

S. Sasanka Kumar, Manoj Komath, Manoj Raama Varma, M. K. Jayaraj, K. Rajeev Kumar

2013-04-12 Paper

DOI: 10.1039/C3CP42648C

In situXRD studies of nanocrystallization of Fe-based metallic glass: a comparative study by reciprocal and direct space methods

Jozef Bednarcik, Stefan Michalik, Vladimir Kolesar, Uta Rütt, Hermann Franz

2013-04-15 Paper

DOI: 10.1039/C3CP44445G

Mapping spatially inhomogeneous electrochemical reactions in battery electrodes using high energy X-rays

Olaf J. Borkiewicz, Karena W. Chapman, Peter J. Chupas

2013-04-16 Communication

DOI: 10.1039/C3CP50590A

Insights into the adsorption and energy transfer of Ag clusters on the AgCl(100) surface

Xiangchao Ma, Ying Dai, Meng Guo, Yingtao Zhu, Baibiao Huang

2013-01-30 Paper

DOI: 10.1039/C3CP44519D

Many-body effects in silicene, silicane, germanene and germanane

Ying Dai, Baibiao Huang, Timo Jacob

2013-04-11 Paper

DOI: 10.1039/C3CP51078F

Compositional-asymmetry influenced non-linear optical processes of plasmonic nanoparticle dimers

Anke Horneber, Anne-Laure Baudrion, Pierre-Michel Adam, Alfred J. Meixner, Dai Zhang

2013-03-07 Communication

DOI: 10.1039/C3CP43349H

Insights into the polymorphism of glycine: membrane crystallization in an electric field

Gianluca Di Profio, Mika T. Reijonen, Rocco Caliandro, Antonietta Guagliardi, Efrem Curcio, Enrico Drioli

2013-05-09 Paper

DOI: 10.1039/C3CP50664A

Elucidation of structure and nature of the PdO–Pd transformation using in situ PDF and XAS techniques

Jonathan Keating, Gopinathan Sankar, Timothy I. Hyde, Shinji Kohara, Koji Ohara

2013-04-26 Paper

DOI: 10.1039/C3CP50600B

You might also like

Compound Q&A

How should waste containing (6-Bromo-2-naphthyl)oxy](dimethyl)(2-methyl-2-propanyl)silane be handled?

Waste containing (6-Bromo-2-naphthyl)oxy](dimethyl)(2-methyl-2-propanyl)silane (...

100751-65-3[(6-Bromo-2-naphthyl...
Compound Q&A

How is 7-Fluoro-4-isoquinolinecarboxylic acid (CAS: 1841081-40-0) typically synthesized?

7-Fluoro-4-isoquinolinecarboxylic acid can be synthesized via a multi-step proce...

1841081-40-07-Fluoro-4-isoquinol...
Compound Q&A

What are the physical and chemical properties of 2,3,5,6-Tetrabromothieno[3,2-b]thiophene (CAS: 124638-53-5)?

2,3,5,6-Tetrabromothieno[3,2-b]thiophene is a crystalline compound with a high m...

124638-53-52,3,5,6-Tetrabromoth...
Compound Q&A

Is 1-[4-(Benzylamino)-7,8-dihydro-5H-pyrano[4,3-d]pyrimidin-2-yl]-2-methyl-1H-indole-4-carboxamide (CAS: 1542705-92-9) safe?

1-[4-(Benzylamino)-7,8-dihydro-5H-pyrano[4,3-d]pyrimidin-2-yl]-2-methyl-1H-indol...

1542705-92-91-[4-(Benzylamino)-7...
Compound Q&A

What is the market or research trend for imidazo[5,1-d]-1,2,3,5-tetrazine-8-carboxylic acid, 3,4-dihydro-3-methyl-4-oxo- (CAS: 113942-30-6)?

The market for imidazo[5,1-d]-1,2,3,5-tetrazine-8-carboxylic acid, 3,4-dihydro-3...

113942-30-6Imidazo[5,1-d]-1,2,3...
Compound Q&A

What is 3-(Triisopropylsilyl)propiolaldehyde (CAS: 163271-80-5)?

3-(Triisopropylsilyl)propiolaldehyde is a synthetic organic compound with the CA...

163271-80-53-(Triisopropylsilyl...
Compound Q&A

What regulatory guidelines apply to 6-Nitro-2H-1,4-benzoxazin-3(4H)-one (CAS: 81721-87-1)?

6-Nitro-2H-1,4-benzoxazin-3(4H)-one (CAS: 81721-87-1) is subject to various regu...

81721-87-16-Nitro-2H-1,4-benzo...
Compound Q&A

How should waste containing (3-Fluorophenyl)(4-{[(2-methyl-2-propanyl)oxy]carbonyl}-1-piperazinyl)acetic acid (CAS: 885272-91-3) be handled?

Waste containing (3-Fluorophenyl)(4-{[(2-methyl-2-propanyl)oxy]carbonyl}-1-piper...

885272-91-3(3-Fluorophenyl)(4-{...
Compound Q&A

What are the physical and chemical properties of N,N'-4,4'-Biphenyldiyldiisonicotinamide (CAS: 55119-40-9)?

N,N'-4,4'-Biphenyldiyldiisonicotinamide is a white crystalline solid with a mole...

55119-40-9N,N'-4,4'-Biphenyldi...
Compound Q&A

What industries use 6-Bromo-8-fluoro-2-quinazolinol (CAS: 1036756-15-6)?

6-Bromo-8-fluoro-2-quinazolinol is primarily used in the pharmaceutical industry...

1036756-15-66-Bromo-8-fluoro-2-q...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.