Characterization of active sites on copper ion-exchanged ZSM-5-type zeolite for NO decomposition reaction

Literature Information

Publication Date
DOI 10.1039/A809447K
Impact Factor 3.676
Authors


View Original

Abstract

The necessary condition of the active sites for the NO decomposition reaction on copper ion-exchanged ZSM-5-type zeolite (CuZSM5) has been investigated by using an adsorbed N2 species that is one of the products of the decomposition reaction of NO. Two dominant types of exchangeable sites in the CuZSM5 sample were identified by means of IR spectra using CO as a probe molecule; these sites are responsible for giving a 2159 and 2151 cm-1 band due to the chemisorbed CO species. From exploration of the decomposition reaction of NO on the samples having different amounts of preadsorbed CO molecules, it was found that the NO decomposition reaction occurs only under the condition that both types of sites coexist. The quantitative relationship between the number of these sites and the ion-exchange capacity of the sample was also evaluated from the IR spectra for CO adsorption. Combination with a similar relationship between the NO decomposition activity and the copper ion-exchange capacity found in the reference convinces us that the presence of both types of sites located closely to each other is a necessary condition for the NO decomposition reaction. The structure of the copper ion in CuZSM5 under different exchange levels was also studied by Cu-K-edge X-ray absorption spectroscopy, from which, evidence supporting an existence of dimer species of copper ions was obtained for samples that have excessive ion-exchanged copper ion exceeding the stoichiometric amount. In addition, the oxidation–reduction process of copper ion species was also examined during NO adsorption and subsequent heat treatment invacuo. It is concluded that zeolite having an appropriate Si/Al ratio, in which it is possible for the copper ion to exist as dimer species, may provide the key to the redox cycle of copper ion as well as catalysis in NO decomposition.

Related Literature

Spatiotemporal dynamics of minimal bromate oscillators in an open one-side-fed reactor

Krisztina Kurin-Csörgei, István Szalai

2018-04-30 Paper

DOI: 10.1039/C8CP01953C

Fermi resonance in solvated H3O+: a counter-intuitive trend confirmed via a joint experimental and theoretical investigation

Qian-Rui Huang, Tomoki Nishigori, Marusu Katada, Asuka Fujii, Jer-Lai Kuo

2018-04-30 Paper

DOI: 10.1039/C8CP02151A

Small stoichiometric (MoS2)n clusters with the 1T phase

Ya-Ya Wang, Jia-Jun Deng, Xin Wang, Jian-Tao Che, Xun-Lei Ding

2018-01-30 Paper

DOI: 10.1039/C7CP07914A

A potential material for hydrogen storage: a Li decorated graphitic-CN monolayer

Yong-Dao Chen, Song Yu, Wen-Hui Zhao, Shun-Fang Li, Xiang-Mei Duan

2018-04-25 Paper

DOI: 10.1039/C8CP01145A

Novel two-dimensional ferromagnetic semiconductors: Ga-based transition-metal trichalcogenide monolayers

Maolin Yu, Xiaofei Liu, Wanlin Guo

2018-01-30 Paper

DOI: 10.1039/C7CP07912E

Associative detachment (AD) paths for H and CN− in the gas-phase: astrophysical implications

Stanka V. Jerosimić, Franco A. Gianturco, Roland Wester

2017-10-17 Paper

DOI: 10.1039/C7CP05573K

Phenyl radical + propene: a prototypical reaction surface for aromatic-catalyzed 1,2-hydrogen-migration and subsequent resonance-stabilized radical formation

Zachary J. Buras, Te-Chun Chu, Adeel Jamal, Nathan W. Yee, Joshua E. Middaugh, William H. Green

2018-04-13 Paper

DOI: 10.1039/C8CP01159A

Effects of 1-hexanol on C12E10 micelles: a molecular simulations and light scattering study

Sampsa Vierros, Maria Sammalkorpi

2018-01-31 Paper

DOI: 10.1039/C7CP07511A

You might also like

Compound Q&A

What is 3-Fluoro-2-methylbenzylamine (CAS: 771573-36-5)?

3-Fluoro-2-methylbenzylamine is an organic compound with the CAS number 771573-3...

771573-36-53-Fluoro-2-methylben...
Compound Q&A

Is Tert-butyl 2-(oxetan-3-ylidene)acetate (CAS: 1207175-03-8) safe?

Tert-butyl 2-(oxetan-3-ylidene)acetate is considered safe for its intended uses ...

1207175-03-8Tert-butyl 2-(oxetan...
Compound Q&A

What precautions should be taken when handling 4-Acetyl-2-fluorobenzonitrile (CAS: 214760-18-6)?

Proper personal protective equipment (PPE) such as gloves, goggles, and a lab co...

214760-18-64-Acetyl-2-fluoroben...
Compound Q&A

How is 2-Ethyl-4-methyl-1,3-thiazole (CAS: 15679-12-6) typically synthesized?

2-Ethyl-4-methyl-1,3-thiazole is commonly synthesized via the reaction of thiour...

15679-12-62-Ethyl-4-methyl-1,3...
Compound Q&A

How should 5',5''-([2,2'-Bithiophene]-5,5'-diyl)bis(([1,1':3',1''-terphenyl]-4,4''-dicarboxylic acid)) (CAS: 1227780-71-3) be stored?

This compound should be stored in a cool, dry place away from direct sunlight an...

1227780-71-35',5''''-([2,2'-Bith...
Compound Q&A

What regulatory guidelines apply to L-Lysine Acetate Salt (CAS: 52315-92-1)?

L-Lysine Acetate Salt (CAS: 52315-92-1) is subject to various regulatory guideli...

52315-92-1L-LYSINE ACETATE SAL...
Compound Q&A

Is 6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) safe?

6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) is generally conside...

259793-96-96-Fluoro-3-hydroxy-2...
Compound Q&A

What are the physical and chemical properties of 1,1'-Sulfonylbis(1H-imidazole) (CAS: 7189-69-7)?

1,1'-Sulfonylbis(1H-imidazole) is a crystalline solid with a molecular weight of...

7189-69-71,1'-Sulfonylbis(1H-...
Compound Q&A

What industries use 4-methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5)?

4-Methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5) is primarily used i...

289483-82-54-methyl-7-nitro-1H-...
Compound Q&A

How should waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) be handled?

Waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) should be ...

97753-82-75-Bromo-3-indolyl-be...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.