Formation of oxygen vacancies in Li2FeSiO4: first-principles calculations

Literature Information

Publication Date 2021-08-23
DOI 10.1039/D1CP02539B
Impact Factor 3.676
Authors

Lihong Zhang, Shunqing Wu, Jianwei Shuai, Zhufeng Hou


View Original

Abstract

The formation of oxygen vacancies could affect various properties of oxides. Herein we have investigated the formation energies of an oxygen vacancy (VO) with the relevant charge states in bulk Pnma-Li2FeSiO4 using first-principles calculations. The formation energies of the VO are essentially dependent on the atomic chemical potentials that represent the experimental conditions. The calculated formation energies of an oxygen vacancy in different charge states indicate that it would be energetically favorable to fully ionize the oxygen vacancy in Li2FeSiO4. The presence of VO is accompanied by a distinct redistribution of the electronic charge densities only around the Fe and Si ions next to the O-vacancy site, which shows a very local influence on the host material arising from VO. This local characteristic is also confirmed by the calculated partial densities of states (PDOS). We also studied the influence of substitutional (MnFe and CoFe) and cation vacancy defects (i.e., VFe and VLi) in the vicinity of an O-vacancy on the formation of an O-vacancy, respectively. We find that the calculated interaction energies between these defects and the oxygen vacancy are all negative, which implies that the formation of an oxygen vacancy becomes easier when the above defects are introduced. Compared to the substitutional defects, the interaction energies between the vacancy defects and the oxygen vacancy are significantly larger. Among them, the interaction energy between VFe and VO is the largest.

Related Literature

Taxonomy of periodic nets and the design of materials

Olaf Delgado-Friedrichs, Michael O’Keeffe, Omar M. Yaghi

2007-01-02 Invited Article

DOI: 10.1039/B615006C

Front cover

Cover

DOI: 10.1039/B705860H

Contents

Front/Back Matter

DOI: 10.1039/B707042J

Copper sulfide nanostripe patterns at the Au(111)/electrolyte interface studied by in situSTM

Daniel Friebel, Christian Schlaup, Peter Broekmann, Klaus Wandelt

2007-02-22 Paper

DOI: 10.1039/B616586A

Back cover

Front/Back Matter

DOI: 10.1039/B708246K

Inelastic insights for molecular tunneling pathways: Bypassing the terminal groups

Alessandro Troisi, Mark A. Ratner

2007-03-21 Paper

DOI: 10.1039/B702377D

You might also like

Compound Q&A

What is the market or research trend for N-(4-Methoxybenzyl)-2-pyridinamine (CAS: 52818-63-0)?

N-(4-Methoxybenzyl)-2-pyridinamine (CAS: 52818-63-0) is increasingly being used ...

52818-63-0N-(4-Methoxybenzyl)-...
Compound Q&A

What precautions should be taken when handling Ethyl 4-(2-chlorophenyl)-1,3-thiazole-2-carboxylate (CAS: 1050507-06-6)?

When handling Ethyl 4-(2-chlorophenyl)-1,3-thiazole-2-carboxylate, appropriate p...

1050507-06-6Ethyl 4-(2-chlorophe...
Compound Q&A

What regulatory guidelines apply to diethyldiselane (CAS: 628-39-7)?

Diethyldiselane (CAS: 628-39-7) is classified under the Globally Harmonized Syst...

628-39-7Diethyldiselane
Compound Q&A

What is the market or research trend for oxocopper (CAS: 12053-18-8)?

The market for oxocopper (CAS: 12053-18-8) is primarily driven by its use in cat...

12053-18-8oxocopper; oxo-(oxoc...
Compound Q&A

What is the market or research trend for 5-{[(2-Methyl-2-propanyl)oxy]carbonyl}-5-azaspiro[2.4]heptane-7-carboxylic acid?

The market for 5-{[(2-Methyl-2-propanyl)oxy]carbonyl}-5-azaspiro[2.4]heptane-7-c...

1268519-54-55-{[(2-Methyl-2-prop...
Compound Q&A

What is 2-(1-Pyrrolidinyl)-4-pyridinamine (CAS: 35981-63-6)?

2-(1-Pyrrolidinyl)-4-pyridinamine is a chemical compound with the CAS number 359...

35981-63-62-(1-Pyrrolidinyl)-4...
Compound Q&A

What are the physical and chemical properties of 2-(3-Pyridinyl)-1-azabicyclo[2.2.2]octane (CAS: 91556-75-1)?

2-(3-Pyridinyl)-1-azabicyclo[2.2.2]octane (CAS: 91556-75-1) is a crystalline sol...

91556-75-12-(3-Pyridinyl)-1-az...
Compound Q&A

How is (S)-Alpha-allyl-proline hydrochloride (CAS: 129704-91-2) typically synthesized?

(S)-Alpha-allyl-proline hydrochloride is usually synthesized via a Wittig reacti...

129704-91-2(S)-Alpha-allyl-prol...
Compound Q&A

What is 3-Methyl-1,2-oxazole-5-carboxylic acid (CAS: 4857-42-5)?

3-Methyl-1,2-oxazole-5-carboxylic acid (CAS: 4857-42-5) is an organic compound w...

4857-42-53-Methyl-1,2-oxazole...
Compound Q&A

How is Lys-SMCC-DM1 (CAS: 1281816-04-3) typically synthesized?

Lys-SMCC-DM1 is synthesized via a multi-step process involving the coupling of S...

1281816-04-3Lys-SMCC-DM1

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.