Theoretical and experimental study of peroxy and alkoxy radicals in the NO3-initiated oxidation of isoprene

Literature Information

Publication Date 2021-03-02
DOI 10.1039/D0CP06267G
Impact Factor 3.676
Authors

L. Vereecken, P. T. M. Carlsson, A. Novelli, F. Bernard, C. Cho, J. N. Crowley, H. Fuchs, W. Mellouki, D. Reimer, J. Shenolikar, R. Tillmann, L. Zhou, A. Kiendler-Scharr, A. Wahner


View Original

Abstract

The initial stages of the nitrate radical (NO3) initiated oxidation of isoprene, in particular the fate of the peroxy (RO2) and alkoxy (RO) radicals, are examined by an extensive set of quantum chemical and theoretical kinetic calculations. It is shown that the oxidation mechanism is highly complex, and bears similarities to its OH-initiated oxidation mechanism as studied intensively over the last decade. The nascent nitrated RO2 radicals can interconvert by successive O2 addition/elimination reactions, and potentially have access to a wide range of unimolecular reactions with rate coefficients as high as 35 s−1; the contribution of this chemistry could not be ascertained experimentally. The chemistry of the alkoxy radicals derived from these peroxy radicals is affected by the nitrate moiety, and can lead to the formation of nitrated epoxy peroxy radicals in competition with isomerisation and decomposition channels that terminate the organic radical chain by NO2 elimination. The theoretical predictions are implemented in the FZJ-NO3-isoprene mechanism for NO3-initiated atmospheric oxidation of isoprene. The model predictions are compared against peroxy radical (RO2) and methyl vinyl ketone (MVK) measurements in a set of experiments on the isoprene + NO3 reaction system performed in the SAPHIR environmental chamber (IsopNO3 campaign). It is shown that the formation of NO2 from the peroxy radicals can prevent a large fraction of the peroxy radicals from being measured by the laser-induced fluorescence (ROxLIF) technique that relies on a quantitative conversion of peroxy radicals to hydroxyl radicals. Accounting for the relative conversion efficiency of RO2 species in the experiments, the agreement between observations and the theory-based FZJ-NO3-isoprene model predictions improves significantly. In addition, MVK formation in the NO3-initiated oxidation was found to be suppressed by the epoxidation of the unsaturated RO radical intermediates, allowing the model-predicted MVK concentrations to be in good agreement with the measurements. The FZJ-NO3-isoprene mechanism is compared against the MCM v3.3.1 and Wennberg et al. (2018) mechanisms.

Related Literature

The first samarium(ii)-mediated aryl radical cyclisation onto an aromatic ring

Hiroaki Ohno, Hiroki Iwasaki, Toru Eguchi, Tetsuaki Tanaka

2004-08-23 Communication

DOI: 10.1039/B410457A

Bis(diethylamino)carbene and the mechanism of dimerisation for simple diaminocarbenes

Roger W. Alder, Leila Chaker, François P. V. Paolini

2004-08-20 Communication

DOI: 10.1039/B409112D

Polystyryl-supported TBD as an efficient and reusable catalyst under solvent-free conditions

Francesco Fringuelli, Ferdinando Pizzo, Carla Vittoriani, Luigi Vaccaro

2004-10-19 Communication

DOI: 10.1039/B409808K

Reversible folding/unfolding of linear molecular strands into helical channel-like complexes upon proton-modulated binding and release of metal ions

Adrian-Mihail Stadler, Nathalie Kyritsakas, Jean-Marie Lehn

2004-08-11 Communication

DOI: 10.1039/B407168A

Photochemical polymerization of thiophene derivatives in aqueous solution

Sergey A. Piletsky, Elena V. Piletska, Kal Karim, Frank Davis, Seamus P. J. Higson, Anthony P. F. Turner

2004-08-20 Communication

DOI: 10.1039/B408387C

The anion sequence in the phase transformation of mesostructures templated by non-ionic block copolymers

Jiawei Tang, Chengzhong Yu, Xufeng Zhou, Xiaoxia Yan, Dongyuan Zhao

2004-08-25 Communication

DOI: 10.1039/B408100E

Photoinduced production of NAD(P)H from an activated fluorescein–DNA monolayer

Heinz-Bernhard Kraatz, Jeremy S. Lee

2004-08-10 Communication

DOI: 10.1039/B406689H

Liquid poly(ethylene glycol) and supercritical carbon dioxide as a biphasic solvent system for lipase-catalyzed esterification

Manfred T. Reetz, Wolfgang Wiesenhöfer

2004-10-18 Communication

DOI: 10.1039/B412049C

Novel Pt/CeO2/C catalysts for electrooxidation of alcohols in alkaline media

Changwei Xu, Pei Kang Shen

2004-08-25 Communication

DOI: 10.1039/B408589B

Metal-chelating nanoparticles as selective fluorescent sensor for Cu2+

Rachel Méallet-Renault, Robert Pansu, Sonia Amigoni-Gerbier, Chantal Larpent

2004-09-07 Communication

DOI: 10.1039/B407766K

You might also like

Compound Q&A

What is the market or research trend for N-(4-Methoxybenzyl)-2-pyridinamine (CAS: 52818-63-0)?

N-(4-Methoxybenzyl)-2-pyridinamine (CAS: 52818-63-0) is increasingly being used ...

52818-63-0N-(4-Methoxybenzyl)-...
Compound Q&A

What precautions should be taken when handling Ethyl 4-(2-chlorophenyl)-1,3-thiazole-2-carboxylate (CAS: 1050507-06-6)?

When handling Ethyl 4-(2-chlorophenyl)-1,3-thiazole-2-carboxylate, appropriate p...

1050507-06-6Ethyl 4-(2-chlorophe...
Compound Q&A

What regulatory guidelines apply to diethyldiselane (CAS: 628-39-7)?

Diethyldiselane (CAS: 628-39-7) is classified under the Globally Harmonized Syst...

628-39-7Diethyldiselane
Compound Q&A

What is the market or research trend for oxocopper (CAS: 12053-18-8)?

The market for oxocopper (CAS: 12053-18-8) is primarily driven by its use in cat...

12053-18-8oxocopper; oxo-(oxoc...
Compound Q&A

What is the market or research trend for 5-{[(2-Methyl-2-propanyl)oxy]carbonyl}-5-azaspiro[2.4]heptane-7-carboxylic acid?

The market for 5-{[(2-Methyl-2-propanyl)oxy]carbonyl}-5-azaspiro[2.4]heptane-7-c...

1268519-54-55-{[(2-Methyl-2-prop...
Compound Q&A

What is 2-(1-Pyrrolidinyl)-4-pyridinamine (CAS: 35981-63-6)?

2-(1-Pyrrolidinyl)-4-pyridinamine is a chemical compound with the CAS number 359...

35981-63-62-(1-Pyrrolidinyl)-4...
Compound Q&A

What are the physical and chemical properties of 2-(3-Pyridinyl)-1-azabicyclo[2.2.2]octane (CAS: 91556-75-1)?

2-(3-Pyridinyl)-1-azabicyclo[2.2.2]octane (CAS: 91556-75-1) is a crystalline sol...

91556-75-12-(3-Pyridinyl)-1-az...
Compound Q&A

How is (S)-Alpha-allyl-proline hydrochloride (CAS: 129704-91-2) typically synthesized?

(S)-Alpha-allyl-proline hydrochloride is usually synthesized via a Wittig reacti...

129704-91-2(S)-Alpha-allyl-prol...
Compound Q&A

What is 3-Methyl-1,2-oxazole-5-carboxylic acid (CAS: 4857-42-5)?

3-Methyl-1,2-oxazole-5-carboxylic acid (CAS: 4857-42-5) is an organic compound w...

4857-42-53-Methyl-1,2-oxazole...
Compound Q&A

How is Lys-SMCC-DM1 (CAS: 1281816-04-3) typically synthesized?

Lys-SMCC-DM1 is synthesized via a multi-step process involving the coupling of S...

1281816-04-3Lys-SMCC-DM1

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.