Lithium oxide: a quantum-corrected and classical Monte Carlo study

Literature Information

Publication Date 2019-06-25
DOI 10.1039/C9CP02376C
Impact Factor 3.676
Authors

M. Yu. Lavrentiev, N. L. Allan, C. Wragg


View Original

Abstract

Extensive Monte Carlo simulations of lithium oxide, Li2O, an important material for fusion applications over a wide range of temperatures have been performed. In the low temperature range 1–500 K, quantum path-integral corrections to the enthalpy and unit cell size were determined. We show that classical Monte Carlo underestimates both these quantities and the difference between unit cell parameters with and without quantum corrections is large enough that such corrections should be included in any comparison between theory and experiment. Over the range 300–1000 K, the formation energies of Schottky and Frenkel defects are calculated and compared with those from direct free energy minimisation in the quasiharmonic approximation, which also includes quantum corrections; the Monte Carlo results highlight the onset of failure of the quasiharmonic approximation even at modest temperatures and suggest only a small variation of the defect enthalpies with temperature. Several possible diffusion mechanisms are identified. While an interstitialcy mechanism activates at around 900–1000 K, lithium vacancy migration dominates from 500 K. The estimated migration energy of the Li-vacancy jump (0.28 eV) agrees very well with the most recent NMR study. At temperatures above 1000 K, the superionic phase transition and subsequent melting are simulated and there is good agreement with available experimental data. Our simulations predict a rapid rise in the heat capacity and the thermal expansion coefficient which continues up to the melting point which leaves two interesting questions for future experimental studies: (i) whether above the superionic transition the heat capacity and the thermal expansion coefficient in antifluorite Li2O rise up to the melting point, as in our simulations, or fall, as observed in several fluorites, and (ii) the subsequent change in the heat capacity during melting.

Related Literature

Small molecular adjuvants repurpose antibiotics towards Gram-negative bacterial infections and multispecies bacterial biofilms

Rajib Dey, Sudip Mukherjee, Riya Mukherjee

2023-11-15 Edge Article

DOI: 10.1039/D3SC05124B

Contents list

2023-12-06 Front/Back Matter

DOI: 10.1039/D3SC90236F

Optimizing copper nanoparticles with a carbon shell for enhanced electrochemical CO2 reduction to ethanol

Ting Yao, Wei Xia, Shitao Han, Shuaiqiang Jia, Xue Dong, Min Wang, Jiapeng Jiao, Dawei Zhou, Jiahao Yang, Xueqing Xing, Chunjun Chen

2023-11-24 Edge Article

DOI: 10.1039/D3SC04061E

Inserting an “atomic trap” for directional dopant migration in core/multi-shell quantum dots

Chun Chu, Elan Hofman, Chengpeng Gao, Shuya Li, Hanjie Lin, Walker MacSwain, John M. Franck, Robert W. Meulenberg, Arindam Chakraborty, Weiwei Zheng

2023-11-20 Edge Article

DOI: 10.1039/D3SC04165D

18F-Labeled brain-penetrant EGFR tyrosine kinase inhibitors for PET imaging of glioblastoma

Jonathan E. Tsang, David A. Nathanson

2023-11-09 Edge Article

DOI: 10.1039/D3SC04424F

On-DNA hydroalkylation of N-vinyl heterocycles via photoinduced EDA-complex activation

Mohammed Sharique, Bianca Matsuo, Albert Granados, Saegun Kim, Mahwish Arshad, Hyunjung Oh, Victoria E. Wu, Minxue Huang, Adam Csakai, Lisa A. Marcaurelle, Gary A. Molander

2023-09-14 Edge Article

DOI: 10.1039/D3SC03731B

Self-assembly of cyclic peptide monolayers by hydrophobic supramolecular hinges

Sandra Díaz, Julian Bergueiro, Riccardo Capelli, Javier Montenegro

2023-10-27 Edge Article

DOI: 10.1039/D3SC03930G

You might also like

Compound Q&A

How is 3-(2-Bromoimidazo[2,1-b]thiazol-6-yl)propanoic acid hydrochloride (CAS: 1187830-80-3) typically synthesized?

3-(2-Bromoimidazo[2,1-b]thiazol-6-yl)propanoic acid hydrochloride is typically s...

1187830-80-33-(2-Bromoimidazo[2,...
Compound Q&A

How is 2-Isopropyl-1,3-dioxane-5-carboxylic acid (CAS: 116193-72-7) typically synthesized?

2-Isopropyl-1,3-dioxane-5-carboxylic acid is typically synthesized by the carbox...

116193-72-72-Isopropyl-1,3-diox...
Compound Q&A

What is Alisporivir (CAS: 254435-95-5)?

Alisporivir (CAS: 254435-95-5) is an antiviral medication used in the treatment ...

254435-95-5Alisporivir
Compound Q&A

What are the physical and chemical properties of [1,2,4]triazolo[3,4-a]phthalazine (CAS: 234-80-0)?

[1,2,4]triazolo[3,4-a]phthalazine (CAS: 234-80-0) is a crystalline compound with...

234-80-0[1,2,4]triazolo[3,4-...
1985597-72-5(2S)-5-Hydroxy-2-(4-...
Compound Q&A

Is 2,2-Difluorocyclohexanamine hydrochloride (CAS: 921602-83-7) safe?

2,2-Difluorocyclohexanamine hydrochloride is generally safe when handled under p...

921602-83-72,2-Difluorocyclohex...
Compound Q&A

What are the main uses of 3-Nitro-2-phenylthiophene (CAS: 18150-94-2)?

3-Nitro-2-phenylthiophene is primarily used in the synthesis of other organic co...

18150-94-23-Nitro-2-phenylthio...
Compound Q&A

What is 1-(Trifluoroacetyl)-4-piperidinecarbonitrile (CAS: 77940-79-5)?

1-(Trifluoroacetyl)-4-piperidinecarbonitrile (CAS: 77940-79-5) is a colorless to...

77940-79-51-(Trifluoroacetyl)-...
Compound Q&A

What is the market or research trend for 1,3,6,8-Tetranitro-9H-carbazole (CAS: 4543-33-3)?

Research and market trends for 1,3,6,8-Tetranitro-9H-carbazole (CAS: 4543-33-3) ...

4543-33-31,3,6,8-Tetranitro-9...
Compound Q&A

How should waste containing Dibenzo[b,d]thiophen-1-ylboronic acid (CAS: 1245943-60-5) be handled?

Waste containing Dibenzo[b,d]thiophen-1-ylboronic acid (CAS: 1245943-60-5) shoul...

1245943-60-5Dibenzo[b,d]thiophen...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.