Reactions of water with radical cations of guanine, 9-methylguanine, 2′-deoxyguanosine and guanosine: keto–enol isomerization, C8-hydroxylation, and effects of N9-substitution
Literature Information
Wenjing Zhou, May Myat Moe
The reactions of D2O with radical cations of guanine (9HG˙+), 9-methylguanine (9MG˙+), 2′-deoxyguanosine (dGuo˙+) and guanosine (Guo˙+) were studied in the gas phase, including measurements of reaction cross sections over a center-of-mass collision energy (Ecol) range from 0.1 to 2.0 eV and computation of reaction pathways at DLPNO-CCSD(T)/aug-cc-pVTZ//ωB97XD/6-31+G(d,p). Reaction efficiencies of all radical cations are well below unity (∼2% of collision rate), despite there being exoergic pathways. For each reactant ion, the energetically most favorable product channel corresponds to the formation of water complexes; however, this channel accounts for only 5% of the total cross section at the lowest Ecol and becomes negligible at high Ecol due to short complex lifetimes. The dominant product channel is H/D exchange that appears to be complex-mediated at low Ecol, but switches to a direct mechanism and accompanies keto–enol isomerization of the guanine moiety when Ecol increases. C8-hydroxylation, a minor yet the most biologically important channel, was observed for 9HG˙+; and its mechanism was elucidated in the presence of single and double water molecules, of which the second water eliminates the barrier for C8-addition via a proton shuttle mechanism. All reactions show strong dependence on radical structures, with overall reactivity being 9HG˙+ ≫ 9MG˙+ > dGuo˙+ ≈ Guo˙+. The reaction dynamics of 9HG˙+ and 9MG˙+ with water were simulated at Ecol = 0.1 eV using ωB97XD/6-31+G(d), to reveal complex formation at the early stage of the reaction and the effects of N9-substitution. Trajectory results suggest that the lack of a W9 complex (water bonded to N9–H) is responsible for the reduced reactivity of N9-substituted radical cations; but the relatively long-lived W16 complexes (water bonded to N1–H and C6–O) of dGuo˙+ and Guo˙+ may enhance keto–enol isomerization.
Related Literature
Machine-learning-assisted performance improvements for multi-resonance thermally activated delayed fluorescence molecules
Wanlin Cai, Cheng Zhong, Zi-Wei Ma, Zhuan-Yun Cai, Yue Qiu, Zubia Sajid, De-Yin Wu
DOI: 10.1039/D3CP04441F
Silicon nanocrystal hybrid photocatalysts as models to understand solar fuels producing assemblies
Simran S. Saund, Abha Dabak-Wakankar, Melissa K. Gish
DOI: 10.1039/D3SE01512B
Quantum phase transitions in skewed ladder systems
Sambunath Das, Dayasindhu Dey, Rajamani Raghunathan, Zoltan G. Soos, Manoranjan Kumar, S. Ramasesha
DOI: 10.1039/D3CP04179D
Development and test of highly accurate endpoint free energy methods. 3: partition coefficient prediction using a Poisson–Boltzmann method combined with a solvent accessible surface area model for SAMPL challenges
Taoyu Niu, Xibing He, Fengyang Han, Luxuan Wang, Junmei Wang
DOI: 10.1039/D3CP04174C
An electrospun PVDF-KNN nanofiber based lead-free piezoelectric nanogenerator for mechanical energy scavenging and self-powered force sensing applications
DOI: 10.1039/D3SE00880K
Approaching the free rotor limit: extremely low methyl torsional barrier observed in the microwave spectrum of 2,4-dimethylfluorobenzene
Safa Khemissi, Martin Schwell, Isabelle Kleiner
DOI: 10.1039/D3CP04748B
An efficient Ni3S2–Ni electrode constructed by a one-step powder metallurgy approach for the hydrogen evolution reaction
Yang Zhao, Xiaoqian Shi, Bin Zhang, Shizhong Wei, Jiping Ma, Jianbin Lai, Guangmin Zhou, Huan Pang
DOI: 10.1039/D3SE01393F
Expression of concern: Optimization of a compact layer of TiO2via atomic-layer deposition for high-performance perovskite solar cells
Ahmed Esmail Shalan, Sudhakar Narra, Tomoya Oshikiri, Kosei Ueno, Xu Shi, Hui-Ping Wu, Mahmoud M. Elshanawany, Eric Wei-Guang Diau
DOI: 10.1039/D3SE90087H
The formation energy, phase transition, and negative thermal expansion of Fe2−xScxW3O12
Gaojie Zeng, Xi Zhen, Qilong Gao, Juan Guo, Mingju Chao, Xiansheng Liu, Erjun Liang
DOI: 10.1039/D3CP04816K
You might also like
How should waste containing 4-Bromo-3-methyl-2-thiophenecarboxylic acid (CAS: 265652-39-9) be handled?
Waste containing 4-Bromo-3-methyl-2-thiophenecarboxylic acid (CAS: 265652-39-9) ...
What industries use (2S,5S,2'S,5'S)-1,1'-(1,2-Ethanediyl)bis(2,5-dimethylphospholane) (CAS: 136779-26-5)?
(2S,5S,2'S,5'S)-1,1'-(1,2-Ethanediyl)bis(2,5-dimethylphospholane) is primarily u...
What industries use Ethyl 2-(2-bromo-5-fluorophenyl)acetate (CAS: 1214910-61-8)?
Ethyl 2-(2-bromo-5-fluorophenyl)acetate (CAS: 1214910-61-8) is used in the pharm...
How is 4-Methyl-2-benzofuran-1,3-dione (CAS: 4792-30-7) typically synthesized?
4-Methyl-2-benzofuran-1,3-dione (CAS: 4792-30-7) can be synthesized through seve...
What industries use 4,6-Dichloroquinoline-3-carbonitrile (CAS: 936498-04-3)?
4,6-Dichloroquinoline-3-carbonitrile (CAS: 936498-04-3) is used in the pharmaceu...
What are the main uses of Chloro[tris(para-trifluoromethylphenyl)phosphine]gold(I) (CAS: 385815-83-8)?
Chloro[tris(para-trifluoromethylphenyl)phosphine]gold(I) is primarily used in or...
Is 2-Bromo-5-nitrofuran (CAS: 823-73-4) safe?
2-Bromo-5-nitrofuran (CAS: 823-73-4) is generally considered safe when handled w...
How should 5-Bromo-2,3,4-trifluorobenzoic acid (CAS: 212631-85-1) be stored?
5-Bromo-2,3,4-trifluorobenzoic acid should be stored in a cool, dry place away f...
What are the main uses of Zinc bis(aminoacetate) (CAS: 7214-08-6)?
Zinc bis(aminoacetate) (CAS: 7214-08-6) is primarily used in the pharmaceutical ...
How should Adamantan-1-ylmethanol (CAS: 770-71-8) be stored?
Adamantan-1-ylmethanol should be stored in a cool, dry, and well-ventilated plac...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














![Disodium (6R,7R)-7-{[(2R)-2-hydroxy-2-phenylacetyl]amino}-8-oxo-3-({[1-(sulfonatomethyl)-1H-tetrazol-5-yl]sulfanyl}methyl)-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate structure Disodium (6R,7R)-7-{[(2R)-2-hydroxy-2-phenylacetyl]amino}-8-oxo-3-({[1-(sulfonatomethyl)-1H-tetrazol-5-yl]sulfanyl}methyl)-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate structure](https://static.chemtradehub.com/structs/612/61270-78-8-6b58.webp)