Local crystal structure in the vicinity of Cr in doped AlN thin films studied by X-ray absorption spectroscopy
Literature Information
Padmalochan Panda, R. Ramaseshan, Madhusmita Sahoo, Nanda Gopala Krishna, A. K. Yadav, S. N. Jha, D. Bhattacharyya
This article reports the detailed X-ray absorption spectroscopy (XAS) study of Al1−xCrxN (x = 4, 6, 11%) thin films synthesized by the reactive magnetron co-sputtering technique. All these films were crystallized with a hexagonal wurtzite structure with preferential orientation along the a-axis without the formation of any secondary phases. Surface chemical analysis to evaluate the Cr concentration was carried out using X-ray photoelectron spectroscopy. The study confirmed the presence of AlN and Cr in bonding with N. The local crystal structure around the Cr dopant in the as-synthesized and annealed thin films has been analyzed by both the X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) techniques. From XAS, it was found that Cr replaced the Al atom in the AlN lattice and led to a localized CrN species with distorted tetrahedral AlN in the absence of Cr clustering. The bond lengths of (Cr–N)ax, (Cr–N)bs and Cr–Al, extracted from the EXAFS fitting, were found to decrease with the Cr concentration for both the as-synthesized and annealed thin films due to the enhancement of p–d hybridization between the dopant and the host atoms. However, in the annealed 11% Cr film, the bond lengths are larger than the other and tend to match the Cr–N geometry in CrN.
Related Literature
Protected 2′-deoxyribonucleoside triphosphate building blocks for the photocaging of epigenetic 5-(hydroxymethyl)cytosine in DNA
Soňa Boháčová, Lenka Poštová Slavětínská
DOI: 10.1039/C8OB01106K
An experimental and computational study on isomerically pure, soluble azaphthalocyanines and their complexes and boron azasubphthalocyanines of a varying number of aza units
Martin Liebold, Eugen Sharikow, Elisabeth Seikel, Lukas Trombach, Klaus Harms, Petr Zimcik, Veronika Novakova, Ralf Tonner, Jörg Sundermeyer
DOI: 10.1039/C8OB01705K
Recent developments in functionalization of acyclic α-keto amides
Alagesan Muthukumar, Subramani Sangeetha, Govindasamy Sekar
DOI: 10.1039/C8OB01423J
Circular dichroism and circularly polarised luminescence of bipyrenyl oligopeptides, with piperidines added in the peptide chains
Yuki Mimura, Sayaka Kitamura, Motohiro Shizuma, Mizuki Kitamatsu, Yoshitane Imai
DOI: 10.1039/C8OB01869C
Cobalt(ii)-catalyzed regioselective C–H halogenation of anilides
Ze-lin Li, Kang-kang Sun, Chun Cai
DOI: 10.1039/C8OB01448E
Synthesis of highly rigid phosphine–oxazoline ligands for palladium-catalyzed asymmetric allylic alkylation
Zhongxuan Qiu, Rui Sun, Dawei Teng
DOI: 10.1039/C8OB02265H
Synthesis of near-infrared fluorescent rhodamines via an SNArH reaction and their biological applications
Kun Huang, Songtao Cai, Chang Liu, Xiaojie Jiao, Song He, Liancheng Zhao
DOI: 10.1039/C8OB01701H
Palladium catalyzed carbonylative annulation of the C(sp2)–H bond of N,1-diaryl-1H-tetrazol-5-amines and N,4-diaryl-4H-triazol-3-amines to quinazolinones
Attoor Chandrasekhar, Venkatachalam Ramkumar, Sethuraman Sankararaman
DOI: 10.1039/C8OB02516A
You might also like
What are the main uses of 1-(3-Aminophenyl)-3-[(3R)-1-(3,3-dimethyl-2-oxobutyl)-2-oxo-5-(2-pyridinyl)-2,3-dihydro-1H-1,4-benzodiazepin-3-yl]urea (CAS: 155412-88-7)?
This compound is mainly used as an intermediate in the synthesis of antipsychoti...
How should waste containing 1-(D-Ribofuranosyl)-1,4-dihydro-3-pyridinecarboxamide (CAS: 19132-12-8) be handled?
Waste containing 1-(D-Ribofuranosyl)-1,4-dihydro-3-pyridinecarboxamide (CAS: 191...
What regulatory guidelines apply to 2-Methyl-2-propanyl 3-bromo-3-(hydroxymethyl)-1-azetidinecarboxylate (CAS: 2007919-81-3)?
2-Methyl-2-propanyl 3-bromo-3-(hydroxymethyl)-1-azetidinecarboxylate (CAS: 20079...
What is N-(4-Chloro-2-pyridinyl)acetamide (CAS: 245056-66-0)?
N-(4-Chloro-2-pyridinyl)acetamide (CAS: 245056-66-0) is a chemical compound with...
What is 5-Chloro-2-hydroxybenzoic acid (CAS: 321-14-2)?
5-Chloro-2-hydroxybenzoic acid, also known as 5-chlorosalicylic acid, is an arom...
What precautions should be taken when handling 1,1-Dichloro-1-fluoroethane (CAS: 1717-00-6)?
When handling 1,1-Dichloro-1-fluoroethane (CAS: 1717-00-6), it is important to u...
What are the physical and chemical properties of Fmoc-(2S,3R)-3-phenylpyrrolidine-2-carboxylic acid (CAS: 281655-32-1)?
Fmoc-(2S,3R)-3-phenylpyrrolidine-2-carboxylic acid is a white crystalline solid ...
What are the main uses of 4-Amino-5-bromo-2-pyridinecarboxylic acid (CAS: 1363381-01-4)?
4-Amino-5-bromo-2-pyridinecarboxylic acid is primarily used as a precursor in th...
What precautions should be taken when handling (S)-tert-butyl 2-((2-(4-bromophenyl)-2-oxoethyl)carbamoyl)pyrrolidine-1-carboxylate (CAS: 1007881-98-2)?
Handling this compound should be done with personal protective equipment (PPE) i...
What precautions should be taken when handling 8-bromo-2,2-dimethyl-3,4-dihydro-2H-1,4-benzoxazin-3-one (CAS: 688363-73-7)?
When handling 8-bromo-2,2-dimethyl-3,4-dihydro-2H-1,4-benzoxazin-3-one, use prop...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














