Proton transfer in microbial electrolysis cells
Literature Information
Alex J. Lewis
Proton transfer and electron transfer are of prime importance in the development of microbial electrochemical cells. While electron transfer is primarily controlled by biology, proton transfer is controlled by process engineering and cell design. To develop commercially feasible technologies around the concept of a bioelectrochemical cell, real feedstocks have to be explored and associated limitations have to be identified. In this study, the proton transfer rate was quantified for a microbial electrolysis cell (MEC) and its dependence on process parameters was investigated using a proton balance model. The reaction system consisted of a biomass-derived pyrolytic aqueous stream as a substrate producing hydrogen in a flow-through MEC. The proton transfer rate increased with anode flow rate and organic loading rate up to a maximum of 0.36 ± 0.01 moles per m2 per h, equivalent to a hydrogen production rate of 9.08 L per L per day. Higher rates of hydrogen production, reaching 11.7 ± 0.2 L per L per day were achieved, when additional protons were provided via the cathode buffer. Electrochemical impedance spectroscopy shows that proton transfer was the dominant resistance in the production of hydrogen. The quantification of proton transfer rates for MECs with potential for biorefinery application and the demonstration of high hydrogen production rates approaching those required for commercial consideration indicate the strong potential of this technology for renewable hydrogen production. Understanding the transport phenomenon in bioelectrochemical cells is of great significance since these systems have potential for wide-ranging applications including energy production, bioremediation, chemical and nanomaterial synthesis, electro-fermentation, energy storage, desalination, and produced water treatment. Electron transfer in anode biofilms has been investigated extensively, but proton transfer studies are also important, since many cathodic half reactions require protons as the reactant. Determination of transport rates via proton balance was investigated in microbial electrolysis cells, which can be applied to other forms of microbial electrochemical systems. These systems have a unique niche in the development of future biorefineries as a means of recovering energy from waste streams with potential for water recycle, making them an integral part of the water–energy nexus focus area.
Recommended Journals

Russian Journal of Coordination Chemistry

Crystallography Reports

Russian Journal of Bioorganic Chemistry

Chemical Communications

Russian Chemical Bulletin

Drug Discovery Today

Current Opinion in Colloid & Interface Science

New Journal of Chemistry

Chemistry Education Research and Practice

Russian Journal of Applied Chemistry
Related Literature
Antitumor benzothiazoles. Frontier molecular orbital analysis predicts bioactivation of 2-(4-aminophenyl)benzothiazoles to reactive intermediates by cytochrome P4501A1
Sean E. O'Brien, Helen L. Browne, Tracey D. Bradshaw, Andrew D. Westwell, Malcolm F. G. Stevens, Charles A. Laughton
DOI: 10.1039/B209067H
Syntheses and anti-cancer activity of CO-releasing molecules with targeting galactose receptors
Jili Li, Jinlong Zhang, Qiuping Zhang, Zhongjie Bai, Quanyi Zhao, Dian He, Zhen Wang, Yonglin Chen, Bin Liu
DOI: 10.1039/C8OB01921E
Mechanism of the oxidation of aromatic sulfides catalysed by a water soluble iron porphyrin
Enrico Baciocchi, Maria Francesca Gerini, Osvaldo Lanzalunga, Andrea Lapi, Maria Grazia Lo Piparo
DOI: 10.1039/B209004J
Synthesis of stereochemically-biased spiropyrans by microwave-promoted, one-pot alkylation–condensation
Alexis Perry, Kane Davis, Lara West
DOI: 10.1039/C8OB01996G
Synthesis, absolute configuration and conformation of optically active 1,2-homoheptafulvalene
Shunji Ito, Mitsuhiro Kurita, Sigeru Kikuchi, Toyonobu Asao, Yoshitora Ito, Masaji Oda, Hideo Sotokawa, Akio Tajiri, Noboru Morita
DOI: 10.1039/B210949M
Synthesis and Suzuki–Miyaura cross coupling reactions for post-synthetic modification of a tetrabromo-anthracenyl porphyrin
Joffrey Pijeat, Yannick J. Dappe, Pierre Thuéry, Stéphane Campidelli
DOI: 10.1039/C8OB02150C
Characterization of binary solvent mixtures: the water–acetonitrile mixture
Francisco García-Blanco
DOI: 10.1039/B210405A
The selective functionalisation and difunctionalisation of p-substituted calix[6]arene and calix[8]arenes using hydrophilic moieties
Gwénaëlle Hervé, Dirk Uwe Hahn, Anne-Cécile Hervé, Kerry J. Goodworth, Alison M. Hill, Helen C. Hailes
DOI: 10.1039/B208649M
Cyclopropanation of alkenes with metallocarbenes generated from monocarbonyl iodonium ylides
Tristan Chidley, Graham K. Murphy
DOI: 10.1039/C8OB02636J
Synthesis and properties of a lysosome-targeting fluorescent ionophore based on coumarins and squaramides
Xiao-Qiao Hong, Xi-Hui Yu, Wen-Hua Chen
DOI: 10.1039/C8OB01957F
You might also like
Is 4-Benzyl-2,2-dimethylmorpholine (CAS: 84761-04-6) safe?
4-Benzyl-2,2-dimethylmorpholine is generally considered safe when handled under ...
What is (5,6-Dimethoxy-3-pyridinyl)boronic acid (CAS: 1346526-61-1)?
(5,6-Dimethoxy-3-pyridinyl)boronic acid is a chemical compound with the molecula...
How is 1,1,3,3-Tetramethyl-1,3-bis(2-methyl-2-propanyl)disiloxane (CAS: 67875-55-2) typically synthesized?
1,1,3,3-Tetramethyl-1,3-bis(2-methyl-2-propanyl)disiloxane is synthesized throug...
What are the main uses of (2R,4S)-1-Boc-4-methylpyrrolidine-2-carboxylic acid (CAS: 1018818-04-6)?
(2R,4S)-1-Boc-4-methylpyrrolidine-2-carboxylic acid is primarily used as a build...
What precautions should be taken when handling 2,3-Dichloroacrylonitrile (CAS: 22410-58-8)?
When handling 2,3-Dichloroacrylonitrile, it is crucial to wear appropriate perso...
How should (S)-1-(o-Tolyl)ethanamine hydrochloride (CAS: 1332832-16-2) be stored?
(S)-1-(o-Tolyl)ethanamine hydrochloride should be stored in a cool, dry place to...
What are the physical and chemical properties of Benzyl [1-(hydroxyamino)-1-imino-2-methyl-2-propanyl]carbamate (CAS: 518047-98-8)?
Benzyl [1-(hydroxyamino)-1-imino-2-methyl-2-propanyl]carbamate (CAS: 518047-98-8...
What industries use 2-Methyloxazole-5-carbaldehyde (CAS: 885273-42-7)?
2-Methyloxazole-5-carbaldehyde is used in the pharmaceutical industry for the sy...
What is the market or research trend for 2-Methyl-2-propanyl 4-[(1S)-1-hydroxyethyl]-1-piperidinecarboxylate (CAS: 389889-82-1)?
The market for 2-Methyl-2-propanyl 4-[(1S)-1-hydroxyethyl]-1-piperidinecarboxyla...
Is 1-Butyl-3-methylpyridinium bromide (CAS: 26576-85-2) safe?
1-Butyl-3-methylpyridinium bromide is generally considered safe for laboratory u...

![3-(6-Nitrobenzo[d][1,3]dioxol-5-yl)acrylic acid structure 3-(6-Nitrobenzo[d][1,3]dioxol-5-yl)acrylic acid structure](https://static.chemtradehub.com/structs/631/6315-90-8-6b36.webp)
![1,4-Piperazinediylbis{[6-(1H-benzimidazol-2-yl)-2-pyridinyl]methanone} structure 1,4-Piperazinediylbis{[6-(1H-benzimidazol-2-yl)-2-pyridinyl]methanone} structure](https://static.chemtradehub.com/structs/191/1912399-75-7-b9f0.webp)


