Role of grain size on redox induced compositional stresses in Pr doped ceria thin films

Literature Information

Publication Date 2017-04-12
DOI 10.1039/C7CP00088J
Impact Factor 3.676
Authors

Jay Sheth, Di Chen, Scott T. Misture, Brian W. Sheldon


View Original

Abstract

In constrained geometries and in varying oxygen partial pressures and operating temperatures, exchange of oxygen ions between non-stoichiometric oxide thin films (for example, doped and undoped ceria systems) and the gas phase can lead to stresses. In this study, these compositional stresses were investigated in thin films of nanocrystalline 10% praseodymium doped ceria (PCO), as a function of average grain size. In situ wafer curvature measurements, along with High Temperature X-Ray Diffraction (HTXRD), were employed to measure stresses and strains, respectively on the PCO films during oxidation–reduction cycling, over the pO2 range of 10−1–10−5 atm at 750 °C. For relatively large grain sizes, the stress values agree well with the amount of expansion induced by oxygen non-stoichiometry (chemical expansion) predicted by a thin film defect equilibria model that was developed previously. The compositional stresses were found to increase with decreasing grain size. The origin of this effect, including the role of space charge effects near surfaces and interfaces are discussed in this paper. To our knowledge, this is the first time that such comparisons are reported by simultaneously employing high temperature in situ wafer curvature and HTXRD measurements on doped ceria systems.

Related Literature

Water ice nanoparticles: size and temperature effects on the mid-infrared spectrum

Chris Medcraft, Don McNaughton, Chris D. Thompson, Dominique R. T. Appadoo, Sigurd Bauerecker, Evan G. Robertson

2013-01-21 Paper

DOI: 10.1039/C3CP43974G

Controlled transition dipole alignment of energy donor and energy acceptor molecules in doped organic crystals, and the effect on intermolecular Förster energy transfer

Bailing Yue, Zengqi Xie, Bingrong Gao, Yuanxiang Xu, Linlin Liu, Hongbo Sun

2013-01-08 Paper

DOI: 10.1039/C3CP43800G

Contents list

Front/Back Matter

DOI: 10.1039/C2CP90204D

A donor–acceptor type organic dye connected with a quinoidal thiophene for dye-sensitized solar cells

Makoto Komatsu, Jotaro Nakazaki, Satoshi Uchida, Takaya Kubo, Hiroshi Segawa

2013-01-03 Paper

DOI: 10.1039/C2CP43598E

In situ analysis of cisplatin binding to DNA: the effects of physiological ionic conditions

Jin-Sung Park, Sook Ho Kim, Nam-Kyung Lee, Kyoung J. Lee, Seok-Cheol Hong

2012-01-05 Paper

DOI: 10.1039/C2CP23551J

Low-temperature combustion chemistry of biofuels: pathways in the initial low-temperature (550 K–750 K) oxidation chemistry of isopentanol‡

Oliver Welz, Judit Zádor, John D. Savee, Martin Y. Ng, Giovanni Meloni, Leonid Sheps, Taek Soon Lee, David L. Osborn, Craig A. Taatjes

2012-01-05 Paper

DOI: 10.1039/C2CP23248K

A ring polymer molecular dynamics study of the isotopologues of the H + H2 reaction

Ricardo Pérez de Tudela, Pablo G. Jambrina, Jesús F. Castillo, Vicente Sáez-Rábanos, David E. Manolopoulos, F. Javier Aoiz

2013-01-04 Paper

DOI: 10.1039/C2CP44364C

Theoretical studies of Pt–Ti nanoparticles for potential use as PEMFC electrocatalysts

Paul C. Jennings, Bruno G. Pollet, Roy L. Johnston

2012-01-06 Paper

DOI: 10.1039/C2CP23430K

You might also like

Compound Q&A

How should 2-Methylbenzene-1,4-diamine dihydrochloride (CAS: 615-45-2) be stored?

2-Methylbenzene-1,4-diamine dihydrochloride (CAS: 615-45-2) should be stored in ...

615-45-22-Methylbenzene-1,4-...
Compound Q&A

Is (1S,4S)-2,5-Diazabicyclo[2.2.1]heptane dihydrobromide (CAS: 132747-20-7) safe?

(1S,4S)-2,5-Diazabicyclo[2.2.1]heptane dihydrobromide is generally considered sa...

132747-20-7(1S,4S)-2,5-Diazabic...
Compound Q&A

What industries use (6-Chloropyridazin-3-YL)methanamine (CAS: 871826-15-2)?

(6-Chloropyridazin-3-YL)methanamine finds applications in the pharmaceutical ind...

871826-15-2(6-Chloropyridazin-3...
Compound Q&A

What are the main uses of 2-Fluoro-3-methylphenol (CAS: 77772-72-6)?

2-Fluoro-3-methylphenol is primarily used in the synthesis of pharmaceuticals, p...

77772-72-62-Fluoro-3-methylphe...
Compound Q&A

What precautions should be taken when handling 3-Methoxy-4-nitrobenzonitrile (CAS: 177476-75-4)?

When handling 3-Methoxy-4-nitrobenzonitrile, it is important to wear appropriate...

177476-75-43-Methoxy-4-nitroben...
Compound Q&A

What precautions should be taken when handling 1,3-Oxazolo[4,5-b]pyridine-2(3H)-thione (CAS: 211949-57-4)?

When handling 1,3-Oxazolo[4,5-b]pyridine-2(3H)-thione (CAS: 211949-57-4), it is ...

211949-57-4[1,3]Oxazolo[4,5-b]p...
Compound Q&A

What regulatory guidelines apply to 4-Ethynylbenzamide (CAS: 90347-86-7)?

4-Ethynylbenzamide (CAS: 90347-86-7) falls under various regulatory guidelines i...

90347-86-74-Ethynylbenzamide
Compound Q&A

What are the main uses of 3-(2-Ethylphenyl)-2-thioxo-4-imidazolidinone (CAS: 186822-57-1)?

3-(2-Ethylphenyl)-2-thioxo-4-imidazolidinone is primarily used as an intermediat...

186822-57-13-(2-Ethylphenyl)-2-...
Compound Q&A

What is (2-Fluoro-6-methoxyphenyl)acetic acid (CAS: 500912-19-6)?

(2-Fluoro-6-methoxyphenyl)acetic acid, also known as 4-fluoro-3-methoxybenzoic a...

500912-19-6(2-Fluoro-6-methoxyp...
Compound Q&A

What is the market or research trend for 2-[4-(Hydroxymethyl)phenoxy]ethanol (CAS: 102196-18-9)?

Market trends for 2-[4-(Hydroxymethyl)phenoxy]ethanol (CAS: 102196-18-9) indicat...

102196-18-92-[4-(Hydroxymethyl)...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.