Bifunctional Ce1−xEuxO2 (0 ≤ x ≤ 0.3) nanoparticles for photoluminescence and photocatalyst applications: an X-ray absorption spectroscopy study

Literature Information

Publication Date 2015-10-19
DOI 10.1039/C5CP05251C
Impact Factor 3.676
Authors

Aditya Sharma, Mayora Varshney, Jaehun Park, Tae Kyun Ha, Keun Hwa Chae, Hyun Joon Shin


View Original

Abstract

Ce1−xEuxO2 (0 ≤ x ≤ 0.3) nanoparticles (NPs) were synthesized by the chemical precipitation method. The microstructures and morphology were characterized by synchrotron X-ray diffraction and high resolution transmission electron microscopy. X-ray absorption near edge structure (XANES) spectra at the Eu M5,4-edge and atomic-multiplet calculations revealed that Eu3+ was predominantly present in the CeO2 lattice and Eu2+ was negligibly present within the entire doping range. The detailed analysis of the Ce M5,4-edge and the O K-edge has shown strong dependence of the Ce3+/Ce4+ ratio and oxygen vacancy with Eu content. Extended X-ray absorption fine structure (EXAFS) spectra at the Ce K-edge, along with theoretical fitting, have shown systematic variation in the coordination number, bond length and Debye–Waller factor with Eu doping. A blue shift in the absorption edge was observed which implies a net increase in the charge transfer gap between the O 2p and Ce 4f bands due to the increased number of Ce3+ ions in the Eu doped samples. The excitation and emission spectra of pure CeO2 NPs did not show any photoluminescence (PL) characteristic; however, Ce1−xEuxO2 (x = 0.1–0.3) NPs showed significant improvements in the 4f–4f, 5D0–7F2 and 5D0–7F1 transitions induced luminescence properties. Eu doping has two major effects on the electronic structure and optical properties of CeO2 NPs: the first, at an Eu content of 10 mol%, is the formation of Ce4+–O–Eu3+ networks, i.e., Eu3+ ions substitute the Ce4+ ions and introduce oxygen vacancies and Ce3+ ions in the host lattice, which favors the 5D0–7F2 induced PL properties. The other, at an Eu doping over 10 mol%, is the formation of both Ce4+–O–Eu3+ and Ce3+–O–Eu3+, i.e., Eu3+ ions not only take substitutional sites of Ce4+ ions but also replace a fraction of Ce3+ ions in the CeO2 lattice which favors 5D0–7F1 induced PL properties. As an application of CeO2 NPs towards the degradation of water pollutants, we demonstrated that the Ce1−xEuxO2 (0 ≤ x ≤ 0.3) NPs can serve as effective photocatalyst materials towards the degradation of the methyl-orange aqueous pollutant dye under UV light irradiation.

Related Literature

Monitoring the biochemical alterations in hypertension affected salivary gland tissues using Fourier transform infrared hyperspectral imaging

Shaiju S. Nazeer, Rarinthorn Samrid, David Perez-Guaita, Parichat Prachaney, Kowit Chaisiwamongkol, Poungrat Pakdeechote, Bayden R. Wood

2017-01-25 Paper

DOI: 10.1039/C6AN02074G

Back cover

Cover

DOI: 10.1039/C8AN90092B

Outstanding Reviewers for Analyst in 2016

2017-03-16 Editorial

DOI: 10.1039/C7AN90024D

Back cover

Cover

DOI: 10.1039/C7AN90030A

Microcontact printing with aminosilanes: creating biomolecule micro- and nanoarrays for multiplexed microfluidic bioassays

Shivani Sathish, Sébastien G. Ricoult, Kazumi Toda-Peters, Amy Q. Shen

2017-04-05 Paper

DOI: 10.1039/C7AN00273D

Simplified identification of disulfide, trisulfide, and thioether pairs with 213 nm UVPD

James Bonner, Lance E. Talbert, Nicholas Akkawi, Ryan R. Julian

2018-09-21 Paper

DOI: 10.1039/C8AN01582A

You might also like

Compound Q&A

What is the market or research trend for N-(4-Methoxybenzyl)-2-pyridinamine (CAS: 52818-63-0)?

N-(4-Methoxybenzyl)-2-pyridinamine (CAS: 52818-63-0) is increasingly being used ...

52818-63-0N-(4-Methoxybenzyl)-...
Compound Q&A

What precautions should be taken when handling Ethyl 4-(2-chlorophenyl)-1,3-thiazole-2-carboxylate (CAS: 1050507-06-6)?

When handling Ethyl 4-(2-chlorophenyl)-1,3-thiazole-2-carboxylate, appropriate p...

1050507-06-6Ethyl 4-(2-chlorophe...
Compound Q&A

What regulatory guidelines apply to diethyldiselane (CAS: 628-39-7)?

Diethyldiselane (CAS: 628-39-7) is classified under the Globally Harmonized Syst...

628-39-7Diethyldiselane
Compound Q&A

What is the market or research trend for oxocopper (CAS: 12053-18-8)?

The market for oxocopper (CAS: 12053-18-8) is primarily driven by its use in cat...

12053-18-8oxocopper; oxo-(oxoc...
Compound Q&A

What is the market or research trend for 5-{[(2-Methyl-2-propanyl)oxy]carbonyl}-5-azaspiro[2.4]heptane-7-carboxylic acid?

The market for 5-{[(2-Methyl-2-propanyl)oxy]carbonyl}-5-azaspiro[2.4]heptane-7-c...

1268519-54-55-{[(2-Methyl-2-prop...
Compound Q&A

What is 2-(1-Pyrrolidinyl)-4-pyridinamine (CAS: 35981-63-6)?

2-(1-Pyrrolidinyl)-4-pyridinamine is a chemical compound with the CAS number 359...

35981-63-62-(1-Pyrrolidinyl)-4...
Compound Q&A

What are the physical and chemical properties of 2-(3-Pyridinyl)-1-azabicyclo[2.2.2]octane (CAS: 91556-75-1)?

2-(3-Pyridinyl)-1-azabicyclo[2.2.2]octane (CAS: 91556-75-1) is a crystalline sol...

91556-75-12-(3-Pyridinyl)-1-az...
Compound Q&A

How is (S)-Alpha-allyl-proline hydrochloride (CAS: 129704-91-2) typically synthesized?

(S)-Alpha-allyl-proline hydrochloride is usually synthesized via a Wittig reacti...

129704-91-2(S)-Alpha-allyl-prol...
Compound Q&A

What is 3-Methyl-1,2-oxazole-5-carboxylic acid (CAS: 4857-42-5)?

3-Methyl-1,2-oxazole-5-carboxylic acid (CAS: 4857-42-5) is an organic compound w...

4857-42-53-Methyl-1,2-oxazole...
Compound Q&A

How is Lys-SMCC-DM1 (CAS: 1281816-04-3) typically synthesized?

Lys-SMCC-DM1 is synthesized via a multi-step process involving the coupling of S...

1281816-04-3Lys-SMCC-DM1

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.