Water ice nanoparticles: size and temperature effects on the mid-infrared spectrum

Literature Information

Publication Date 2013-01-21
DOI 10.1039/C3CP43974G
Impact Factor 3.676
Authors

Chris Medcraft, Don McNaughton, Chris D. Thompson, Dominique R. T. Appadoo, Sigurd Bauerecker, Evan G. Robertson


View Original

Abstract

Mid-infrared spectra have been measured for cubic ice (Ic) nanoparticles (3–150 nm diameter) formed by rapid collisional cooling over a wide range of temperatures (5–209 K). Spectral diagnostics, such as the ratio of surface related dangling OH to interior H-bonded OH stretch bands, reveal the manner in which particle size depends on bath gas temperature and density, and on water molecule concentration. For particles smaller than 5 nm strained intermolecular bonds on the surface and subsurface cause the predominant OH stretch peak position to be dramatically blue shifted by up to 40 cm−1. In the size regime of 8–200 nm the position of the OH stretch absorption band maximum is relatively unaffected by particle size and it is possible to measure the temperature dependence of the peak location without influences from the surface or scattering. The band maximum shifts in a linear fashion from 3218 cm−1 at 30 K to 3253 cm−1 at 209 K, which may assist with temperature profiling of ice particles in atmospheric clouds and extraterrestrial systems. Over the same temperature range the librational mode band shifts very little, from 870 to 860 cm−1. In the water stretching and bending regions discrete spectral features associated with the surface or sub-surface layers have been detected in particles as large as 80 nm.

Related Literature

On the mechanochemical synthesis of C-scorpionates with an oxime moiety and their application in the copper-catalyzed azide–alkyne cycloaddition (CuAAC) reaction

Carla Gomes, Mariana Costa, Susana M. M. Lopes, Bernardo Albuquerque Nogueira, José A. Paixão, Teresa M. V. D. Pinho e Melo, Luísa M. D. R. S. Martins, Marta Pineiro

2023-12-15 Paper

DOI: 10.1039/D3NJ05017C

Back cover

2023-12-13 Cover

DOI: 10.1039/D3TB90233A

Metal–organic gels: recent advances in their classification, characterization, and application in the pharmaceutical field

Wei Cao, Zezhi Lin, Daoyi Zheng, Jianjun Zhang, Weili Heng, Yuanfeng Wei, Yuan Gao, Shuai Qian

2023-10-20 Review Article

DOI: 10.1039/D3TB01612A

Back cover

2023-11-22 Cover

DOI: 10.1039/D3TB90221H

Influence of neutral auxiliary ligands on crystal structure and magnetic behaviour of new [Mn II2Mn III2] clusters supported by p-adamantylcalix[4]arene

Alexander S. Ovsyannikov, Aida I. Samigullina, Daut R. Islamov, Mikhail A. Cherosov, Ruslan G. Batulin, Airat G. Kiiamov, Aidar T. Gubaidullin, Pavel V. Dorovatovskii, Svetlana E. Solovieva, Igor S. Antipin

2023-11-20 Paper

DOI: 10.1039/D3NJ04809H

A metastable small organic molecule for secure memory devices

Hong-Liang Wang, Yu-Ting Du, Xiao-Juan Zhang, Hai-Xian Ren, Lu Qin, Xiao-Bo Luo, Pei-Yang Gu, Lingyun Xu, Shi-Yuan Zhou

2023-11-09 Paper

DOI: 10.1039/D3NJ04177H

Surface plasmon resonance biosensor chips integrated with MoS2–MoO3 hybrid microflowers for rapid CFP-10 tuberculosis detection

Ahmad Nuruddin, Muhammad Iqbal, Hutomo Suryo Wasisto

2023-11-16 Paper

DOI: 10.1039/D3TB01327H

Correction: Injectable organo-hydrogels influenced by click chemistry as a paramount stratagem in the conveyor belt of pharmaceutical revolution

Misba Majood, Radhika Chaurasia, Rupesh, Akanksha Singh, Tapan Dey, Omnarayan Agrawal, Yogesh Kumar Verma, Monalisa Mukherjee

2023-10-24 Correction

DOI: 10.1039/D3TB90198J

Nitrate anions embedded in rigid and cationic 3D energetic MOFs constructed by the chelating ligand towards insensitive energetic materials

Qin Wang, Jiao-Lin Weng, Ying Huang, Fu Yang, Hao-Hui Xie, Fei Tan

2023-11-28 Paper

DOI: 10.1039/D3NJ04910H

You might also like

Compound Q&A

Is 6-(3-Fluorophenyl)picolinic acid (CAS: 887982-40-3) safe?

6-(3-Fluorophenyl)picolinic acid is generally considered safe for laboratory use...

887982-40-36-(3-Fluorophenyl)pi...
Compound Q&A

What industries use (3R)-3-Pyrrolidinol (CAS: 2799-21-5)?

(3R)-3-Pyrrolidinol is used in the pharmaceutical industry as a precursor for dr...

2799-21-5(3R)-3-Pyrrolidinol
Compound Q&A

What precautions should be taken when handling (4R,5R)-4,5-Diethoxycarbonyl-2,2-dimethyldioxolane (CAS: 59779-75-8)?

When handling (4R,5R)-4,5-Diethoxycarbonyl-2,2-dimethyldioxolane (CAS: 59779-75-...

59779-75-8(4R,5R)-4,5-Diethoxy...
Compound Q&A

How is 1-(6-Chloroimidazo[1,2-b]pyridazin-3-yl)ethanone (CAS: 90734-71-7) typically synthesized?

1-(6-Chloroimidazo[1,2-b]pyridazin-3-yl)ethanone is often synthesized via a mult...

90734-71-71-(6-Chloroimidazo[1...
Compound Q&A

What is the market or research trend for N-Ethyl-3,4-dimethylbenzylamine (CAS: 39180-83-1)?

The market for N-Ethyl-3,4-dimethylbenzylamine (CAS: 39180-83-1) remains steady,...

39180-83-1N-Ethyl-3,4-dimethyl...
Compound Q&A

What is Tert-butyl 3-(pyrrolidin-1-yl)azetidine-1-carboxylate (CAS: 1019008-21-9)?

Tert-butyl 3-(pyrrolidin-1-yl)azetidine-1-carboxylate is a chemical compound wit...

1019008-21-9Tert-butyl 3-(pyrrol...
Compound Q&A

What regulatory guidelines apply to 1-Bromo-3-chloro-2,4-dimethoxybenzene (CAS: 1228956-93-1)?

1-Bromo-3-chloro-2,4-dimethoxybenzene (CAS: 1228956-93-1) falls under the classi...

1228956-93-11-Bromo-3-chloro-2,4...
Compound Q&A

Is 8-Bromo-2-methyl-3,4-dihydroisoquinolin-1(2H)-one (CAS: 1368622-07-4) safe?

The safety of 8-Bromo-2-methyl-3,4-dihydroisoquinolin-1(2H)-one (CAS: 1368622-07...

1368622-07-48-Bromo-2-methyl-3,4...
Compound Q&A

Is Benzyl [(3S)-2,6-dioxo-3-piperidinyl]carbamate (CAS: 22785-43-9) safe?

Benzyl [(3S)-2,6-dioxo-3-piperidinyl]carbamate is generally safe when handled wi...

22785-43-9Benzyl [(3S)-2,6-dio...
Compound Q&A

How should 1-{[4-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]sulfonyl}pyrrolidine (CAS: 928657-21-0) be stored?

1-{[4-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]sulfonyl}pyrrolidine s...

928657-21-01-{[4-(4,4,5,5-Tetra...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.