Composite sequence proteomic analysis of proteinbiomarkers of Campylobacter coli, C. lari and C. concisus for bacterial identification‡

Literature Information

Publication Date 2007-07-20
DOI 10.1039/B702859H
Impact Factor 4.616
Authors

Clifton K. Fagerquist, Emma Yee, William G. Miller


View Original

Abstract

Protein biomarkers observed in the matrix-assisted laser desorption/ionization time-of-flight mass spectra (MALDI-TOF-MS) of cell lysates of three strains of Campylobacter coli, two strains of C. lari and one strain of C. concisus have been identified by ‘bottom-up’ proteomic techniques. The significant findings are as follows. First, the proteinbiomarkers identified were: PhnA-related protein, 4-oxalocrotonate tautomerase (DmpI)-related protein, NifU-like protein, cytochrome c, DNA-bindingprotein HU, 10 kDa chaperonin, thioredoxin, as well as several conserved hypothetical and ribosomal proteins. Second, variations in the biomarker ion m/z in MALDI-TOF-MS spectra across species and strains are the result of variations in the amino acid sequence of the protein due to non-synonymous mutations of the biomarker gene. Third, the most common post-translational modifications (PTMs) were the removal of the N-terminal methionine and N-terminal signal peptides. However, in the case of the NifU protein (an iron–sulfur cluster transport protein), post-translational cleavage occurred from the C-terminus. Fourth, only the genomes of the C. coli strain RM2228 and C. lari strain RM2100 have been sequenced; thus, proteomic identification of the proteins of the other strains in this study relied upon sequence homology to the genomic sequence of these strains as well as the genomes of sequences of other Campylobacter strains. In some cases, the determination of the full amino acid sequence of a proteinbiomarker from a genomically non-sequenced strain was accomplished by combining non-overlapping partial sequences from proteomic identifications of genomically-sequenced strains that were of the same species (or of a different species) to that of the non-sequenced strain. The accuracy of this composite sequence was confirmed by both MS and MS/MS. It was necessary, in some cases, to perform de novo sequencing on ‘gaps’ in the composite sequence that were not homologous to any genomically-sequenced strain. In order to validate the composite sequence approach, composite sequences were further confirmed by subsequent DNA sequencing of the biomarker gene. Thus, using the composite sequence approach, it was possible to determine the full amino acid sequence of an unknown protein from a genomically non-sequenced bacterial strain without the necessity of either sequencing the biomarker gene or performing full de novoMS/MS sequencing. The sequence obtained could then be used as a strain-specific biomarker for analysis by ‘top-down’ proteomics techniques.

Related Literature

Isolated-alkene-linked porous organic polymers (BIT-POPs): facile synthesis via ROMP and distinguishing overlapping signals in solid-state 13C NMR

Zhi-Hao Zhang, Shan-Qing Peng, Shumeng Chi, Hanyuan Chen, Lei Fan, Yan Liu, Xiaohua Ma, Mu-Hua Huang

2021-11-03 Paper

DOI: 10.1039/D1PY01120K

The UV-photodissociation of jet-cooled nitrosobenzene studied by fluorescence excitation spectroscopy of the NO fragment

Angela Keßler, Alkwin Slenczka, Reinhold Seiler, Bernhard Dick

2001-06-20 Paper

DOI: 10.1039/B009655P

Contents list

2021-11-23 Front/Back Matter

DOI: 10.1039/D1PY90154K

T,p Dependence of intradiffusion in binary fluid mixtures with carbon dioxide as one component

Thomas Groß, Liuping Chen, Johannes Buchhauser, Hans-Dietrich Lüdemann

2001-06-15 Paper

DOI: 10.1039/B102965G

Oxidative esterification of aliphatic α,ω-diols, an alternative route to polyester precursors for the synthesis of polyurethanes

Mateusz Gosecki, Monika Gosecka, Malgorzata Urbaniak

2021-11-22 Paper

DOI: 10.1039/D1PY01265G

You might also like

Compound Q&A

How should waste containing (6-Bromo-2-naphthyl)oxy](dimethyl)(2-methyl-2-propanyl)silane be handled?

Waste containing (6-Bromo-2-naphthyl)oxy](dimethyl)(2-methyl-2-propanyl)silane (...

100751-65-3[(6-Bromo-2-naphthyl...
Compound Q&A

How is 7-Fluoro-4-isoquinolinecarboxylic acid (CAS: 1841081-40-0) typically synthesized?

7-Fluoro-4-isoquinolinecarboxylic acid can be synthesized via a multi-step proce...

1841081-40-07-Fluoro-4-isoquinol...
Compound Q&A

What are the physical and chemical properties of 2,3,5,6-Tetrabromothieno[3,2-b]thiophene (CAS: 124638-53-5)?

2,3,5,6-Tetrabromothieno[3,2-b]thiophene is a crystalline compound with a high m...

124638-53-52,3,5,6-Tetrabromoth...
Compound Q&A

Is 1-[4-(Benzylamino)-7,8-dihydro-5H-pyrano[4,3-d]pyrimidin-2-yl]-2-methyl-1H-indole-4-carboxamide (CAS: 1542705-92-9) safe?

1-[4-(Benzylamino)-7,8-dihydro-5H-pyrano[4,3-d]pyrimidin-2-yl]-2-methyl-1H-indol...

1542705-92-91-[4-(Benzylamino)-7...
Compound Q&A

What is the market or research trend for imidazo[5,1-d]-1,2,3,5-tetrazine-8-carboxylic acid, 3,4-dihydro-3-methyl-4-oxo- (CAS: 113942-30-6)?

The market for imidazo[5,1-d]-1,2,3,5-tetrazine-8-carboxylic acid, 3,4-dihydro-3...

113942-30-6Imidazo[5,1-d]-1,2,3...
Compound Q&A

What is 3-(Triisopropylsilyl)propiolaldehyde (CAS: 163271-80-5)?

3-(Triisopropylsilyl)propiolaldehyde is a synthetic organic compound with the CA...

163271-80-53-(Triisopropylsilyl...
Compound Q&A

What regulatory guidelines apply to 6-Nitro-2H-1,4-benzoxazin-3(4H)-one (CAS: 81721-87-1)?

6-Nitro-2H-1,4-benzoxazin-3(4H)-one (CAS: 81721-87-1) is subject to various regu...

81721-87-16-Nitro-2H-1,4-benzo...
Compound Q&A

How should waste containing (3-Fluorophenyl)(4-{[(2-methyl-2-propanyl)oxy]carbonyl}-1-piperazinyl)acetic acid (CAS: 885272-91-3) be handled?

Waste containing (3-Fluorophenyl)(4-{[(2-methyl-2-propanyl)oxy]carbonyl}-1-piper...

885272-91-3(3-Fluorophenyl)(4-{...
Compound Q&A

What are the physical and chemical properties of N,N'-4,4'-Biphenyldiyldiisonicotinamide (CAS: 55119-40-9)?

N,N'-4,4'-Biphenyldiyldiisonicotinamide is a white crystalline solid with a mole...

55119-40-9N,N'-4,4'-Biphenyldi...
Compound Q&A

What industries use 6-Bromo-8-fluoro-2-quinazolinol (CAS: 1036756-15-6)?

6-Bromo-8-fluoro-2-quinazolinol is primarily used in the pharmaceutical industry...

1036756-15-66-Bromo-8-fluoro-2-q...

Source Journal

Analyst

Analyst
CiteScore: 7.8
Self-citation Rate: 5.6%
Articles per Year: 653

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.