Thermal properties of metastable ices IV and XII: comparison, isotope effects and relative stabilities

Literature Information

Publication Date 2004-02-13
DOI 10.1039/B315180H
Impact Factor 3.676
Authors

Christoph G. Salzmann, Erwin Mayer, Andreas Hallbrucker


View Original

Abstract

Pure samples of H2O (D2O) ice IV and of H2O (D2O) ice XII were prepared by isobaric heating of high-density amorphous ice at a rate of ≈0.5 K min−1 up to ≈175 K and a pressure of 0.81 GPa for ice IV, and at a heating rate of ≈12 K min−1 and a pressure of 1.21 GPa for ice XII. The crystalline phases recovered at 77 K and 1 bar were characterized by X-ray diffraction and differential scanning calorimetry (DSC). X-Ray diffractograms of D2O ice IV show that it transforms directly into cubic ice, and not via some amorphous phase as intermediate. The DSC scans of all four types of crystalline phases recorded on heating revealed three thermal features in this order: a reversible endothermic step, an intense exotherm from the phase transition to cubic ice, and a weak exotherm from the cubic → hexagonal ice phase transition. For H2O (D2O) ice IV the onset and end temperature of the endothermic step (Tonset and Tend) are at 139.8 ± 0.3 and 147.1 ± 0.2 K (at 146.2 ± 0.8 and 150.2 ± 0.8 K) on heating at 30 K min−1, and the increase in heat capacity (ΔCp) is 1.2 ± 0.2 (0.5 ± 0.1) J K−1 mol−1. On heating at 5 K min−1, the extrapolated peak onset and peak minimum temperature (Te and Tmin) of the phase transition to cubic ice is at 148.7 ± 0.3 and 151.1 ± 0.1 K (at 152.7 ± 0.1 and 155.3 ± 0.2 K), and the enthalpy of the phase transition to cubic ice is −938 ± 14 (−986 ± 14) J mol−1. The corresponding values for H2O (D2O) ice XII are for the endothermic step on heating at 30 K min−1: Tonset and Tend at 131.4 ± 0.8 and 139.5 ± 0.7 K (at 138.1 ± 0.4 and 145.0 ± 0.5 K), and ΔCp is 1.5 ± 0.2 (1.4 ± 0.2) J K−1 mol−1. On heating at 5 K min−1, Te and Tmin of the phase transition to cubic ice is at 149.9 ± 0.3 and 153.0 ± 0.2 K (at 154.0 ± 1.2 and 156.9 ± 0.9 K), and the enthalpy of the phase transition to cubic ice is −1233 ± 23 (−1408 ± 8) J mol−1. Therefore, ΔH for the H2O (D2O) ice XII to H2O (D2O) ice IV phase transition is −295 (−422) J mol−1, and ice XII is more metastable than ice IV at ≈150 K and 1 bar. For H2O (D2O) ice XII the endothermic step is separated by a plateau region from the beginning of crystallization, whereas for H2O (D2O) ice IV these two thermal effects overlap because its Tonset is higher by ≈8 K. Tonset and Te are separated by 4.9 K for D2O ice IV and 7.3 K for H2O ice IV. Thus overlap is more pronounced for the former, the endothermic step being cut off by the beginning of crystallization, which is consistent with the lower ΔCp value for D2O ice IV. The endothermic DSC features are interpreted as before for H2O ice XII by Salzmann et al. (Phys. Chem. Chem. Phys., 2003, 5, 3507), in terms of relaxation of the frozen-in proton order–disorder toward equilibrium via proton order → disorder transition. When H2O (D2O) cubic ice is obtained on heating ice IV, its phase transition to hexagonal ice has a ΔH value of −20 ± 7 (−15 ± 5) J mol−1 which is lower than most of the values reported in the literature. We further present new low-frequency Raman spectra of ice XII and show that a peak at 127 cm−1 has its counterpart in the Raman spectra of Chou et al.'s new “High-Pressure Phase of H2O Ice” (Science, 1998, 281, 809). This supports our previous conclusion (J. Phys. Chem. B, 2002, 106, 1) that the Chou phase is in fact ice XII. We then conjecture on the solid–liquid phase boundaries of both ice IV and ice XII, and on a metastable triple point where ice IV, ice XII and liquid water are in metastable equilibrium.

Related Literature

Structural, thermal, dielectric and phonon properties of perovskite-like imidazolium magnesium formate

Mirosław Mączka, Nathalia Leal Marinho Costa, Anna Gągor, Waldeci Paraguassu, Adam Sieradzki, Jerzy Hanuza

2016-04-25 Paper

DOI: 10.1039/C6CP01353H

Combined experimental and density functional theory studies of an organic–inorganic hybrid perovskite

S. Kassou, R. El-Mrabet, A. Kaiba, P. Guionneau, A. Belaaraj

2016-03-07 Paper

DOI: 10.1039/C5CP06675A

Near-infrared squaraine co-sensitizer for high-efficiency dye-sensitized solar cells

G. Hanumantha Rao, A. Venkateswararao, L. Giribabu, Liyuan Han, Idriss Bedja, Ravindra Kumar Gupta, Ashraful Islam, Surya Prakash Singh

2016-04-19 Paper

DOI: 10.1039/C6CP01669C

Inside front cover

Cover

DOI: 10.1039/C6CP90123A

Characterization of Fe2+ ions in Fe,H/SSZ-13 zeolites: FTIR spectroscopy of CO and NO probe molecules

János Szanyi, Feng Gao, Ja Hun Kwak, Márton Kollár, Yilin Wang, Charles H. F. Peden

2016-03-14 Paper

DOI: 10.1039/C6CP00136J

Macroscopic alignment of chromonic liquid crystals using patterned substrates

Jeong Yeon Kim, Karthik Nayani, Hyeon Su Jeong, Hwan-Jin Jeon, Hae-Wook Yoo, Eun Hyung Lee, Jung Ok Park, Hee-Tae Jung

2016-03-30 Paper

DOI: 10.1039/C5CP07570J

Tuning protein–protein interactions using cosolvents: specific effects of ionic and non-ionic additives on protein phase behavior

Jan Hansen, Florian Platten, Dana Wagner, Stefan U. Egelhaaf

2016-03-14 Paper

DOI: 10.1039/C5CP07285A

Simulation of lipid bilayer self-assembly using all-atom lipid force fields

Callum J. Dickson, Knut Teigen, Ian R. Gould

2016-03-01 Paper

DOI: 10.1039/C5CP07379K

Transfer of complexed and dissociated ionic species at soft interfaces: a voltammetric study of chemical kinetic and diffusional effects

Eduardo Laborda, José Manuel Olmos, Ángela Molina

2016-03-10 Paper

DOI: 10.1039/C6CP00780E

You might also like

Compound Q&A

How should waste containing 4-Bromo-3-methyl-2-thiophenecarboxylic acid (CAS: 265652-39-9) be handled?

Waste containing 4-Bromo-3-methyl-2-thiophenecarboxylic acid (CAS: 265652-39-9) ...

265652-39-94-Bromo-3-methyl-2-t...
Compound Q&A

What industries use (2S,5S,2'S,5'S)-1,1'-(1,2-Ethanediyl)bis(2,5-dimethylphospholane) (CAS: 136779-26-5)?

(2S,5S,2'S,5'S)-1,1'-(1,2-Ethanediyl)bis(2,5-dimethylphospholane) is primarily u...

136779-26-5(2S,5S,2'S,5'S)-1,1'...
Compound Q&A

What industries use Ethyl 2-(2-bromo-5-fluorophenyl)acetate (CAS: 1214910-61-8)?

Ethyl 2-(2-bromo-5-fluorophenyl)acetate (CAS: 1214910-61-8) is used in the pharm...

1214910-61-8Ethyl 2-(2-bromo-5-f...
Compound Q&A

How is 4-Methyl-2-benzofuran-1,3-dione (CAS: 4792-30-7) typically synthesized?

4-Methyl-2-benzofuran-1,3-dione (CAS: 4792-30-7) can be synthesized through seve...

4792-30-74-Methyl-2-benzofura...
Compound Q&A

What industries use 4,6-Dichloroquinoline-3-carbonitrile (CAS: 936498-04-3)?

4,6-Dichloroquinoline-3-carbonitrile (CAS: 936498-04-3) is used in the pharmaceu...

936498-04-34,6-Dichloroquinolin...
Compound Q&A

What are the main uses of Chloro[tris(para-trifluoromethylphenyl)phosphine]gold(I) (CAS: 385815-83-8)?

Chloro[tris(para-trifluoromethylphenyl)phosphine]gold(I) is primarily used in or...

385815-83-8Chloro[tris(para-tri...
Compound Q&A

Is 2-Bromo-5-nitrofuran (CAS: 823-73-4) safe?

2-Bromo-5-nitrofuran (CAS: 823-73-4) is generally considered safe when handled w...

823-73-42-Bromo-5-nitrofuran
Compound Q&A

How should 5-Bromo-2,3,4-trifluorobenzoic acid (CAS: 212631-85-1) be stored?

5-Bromo-2,3,4-trifluorobenzoic acid should be stored in a cool, dry place away f...

212631-85-15-Bromo-2,3,4-triflu...
Compound Q&A

What are the main uses of Zinc bis(aminoacetate) (CAS: 7214-08-6)?

Zinc bis(aminoacetate) (CAS: 7214-08-6) is primarily used in the pharmaceutical ...

7214-08-6Zinc bis(aminoacetat...
Compound Q&A

How should Adamantan-1-ylmethanol (CAS: 770-71-8) be stored?

Adamantan-1-ylmethanol should be stored in a cool, dry, and well-ventilated plac...

770-71-8Adamantan-1-ylmethan...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.