Resonance Raman effects in TS-1: the structure of Ti(iv) species and reactivity towards H2O, NH3 and H2O2: an in situ study
Literature Information
R. Tagliapietra
The isomorphous insertion of 1–2 wt% of Ti into the MFI framework leads to a Titanium silicalite-1 (TS-1) material, which is an active and highly selective catalyst in a remarkable number of low-temperature oxidation reactions with aqueous H2O2 as oxidant. Such Ti(IV) species exhibit a local Td-like symmetry, forming [TiO4] units, and induces to the hosting MFI matrix two Ti-specific vibrational modes at 960 and 1125 cm−1. We report a Raman study on the perturbation caused by interaction with H2O, NH3 and H2O/H2O2 on the vibrational modes of the [TiO4] unit embedded in the MFI framework. The selective use of different excitation laser sources in the near-IR (1064 nm; 9398 cm−1), visible (442 nm; 22 625 cm−1), near-UV (325 nm; 30 770 cm−1) and far-UV (244 nm; 40 985 cm−1) allowed us to progressively enter into the oxygen to titanium charge transfer transition and thus to switch on the resonance effects on the 1125 cm−1 mode, which is the only Ti-specific mode exhibiting the same symmetry of the charge transfer transition. Interaction with both water and ammonia causes the formation of [Ti(H2O)2O4] or [Ti(NH3)2O4] complexes which destroy the Td-like symmetry and thus the Raman enhancement of the 1125 cm−1 mode. Upon dosing a H2O/H2O2 to TS-1, the powders turn yellow as a consequence of the appearance a new charge transfer transition around 385 nm (26 000 cm−1). In order to single out the vibrational mode of the active peroxo complex formed on Ti, we have performed Raman experiments using a visible laser source (442 nm; 22 625 cm−1). In these conditions we have observed the strong enhancement of a mode at 618 cm−1, which has been attributed to the symmetric breathing mode of the Ti(O)2 ring.
Related Literature
Theoretical study of polyiodide formation and stability on monolayer and bilayer graphene
Pascal Puech, Iann C. Gerber
DOI: 10.1039/C5CP04594K
Characterization of thin films of the solid electrolyte LixMg1−2xAl2+xO4 (x = 0, 0.05, 0.15, 0.25)
Maarten J. Mees, Iuliana P. Radu, Andre Stesmans
DOI: 10.1039/C5CP03916A
Metal Ni-loaded g-C3N4 for enhanced photocatalytic H2 evolution activity: the change in surface band bending
Lingling Bi, Dandan Xu, Lijing Zhang, Yanhong Lin, Tengfeng Xie
DOI: 10.1039/C5CP05158D
Glass polymorphism in glycerol–water mixtures: I. A computer simulation study
David A. Jahn, Jessina Wong, Johannes Bachler, Thomas Loerting
DOI: 10.1039/C6CP00075D
Theoretical prediction of silicene as a new candidate for the anode of lithium-ion batteries
Seyedeh Mozhgan Seyed-Talebi, Iraj Kazeminezhad, Javad Beheshtian
DOI: 10.1039/C5CP04666A
Theoretical demonstration of the potentiality of boron nitride nanotubes to encapsulate anticancer molecule
Mohammed El Khalifi, Eric Duverger, Tijani Gharbi, Hatem Boulahdour, Fabien Picaud
DOI: 10.1039/C5CP05148G
A diminutive modification in arylamine electron donors: synthesis, photophysics and solvatochromic analysis – towards the understanding of dye sensitized solar cell performances
Venkatesan Srinivasan, Murugesan Panneer, Madhavan Jaccob, Nagaraj Pavithra, Sambandam Anandan, Arunkumar Kathiravan
DOI: 10.1039/C5CP05338B
First-principles study of line-defect-embedded zigzag graphene nanoribbons: electronic and magnetic properties
Zhaoyong Guan, Chen Si, Shuanglin Hu
DOI: 10.1039/C6CP01263A
Sulfur antisite-induced intrinsic high-temperature ferromagnetism in Ag2S:Y nanocrystals
Pan Wang, Tianye Yang, Rui Zhao, Mingzhe Zhang
DOI: 10.1039/C5CP07690K
You might also like
How should waste containing 4-Bromo-3-methyl-2-thiophenecarboxylic acid (CAS: 265652-39-9) be handled?
Waste containing 4-Bromo-3-methyl-2-thiophenecarboxylic acid (CAS: 265652-39-9) ...
What industries use (2S,5S,2'S,5'S)-1,1'-(1,2-Ethanediyl)bis(2,5-dimethylphospholane) (CAS: 136779-26-5)?
(2S,5S,2'S,5'S)-1,1'-(1,2-Ethanediyl)bis(2,5-dimethylphospholane) is primarily u...
What industries use Ethyl 2-(2-bromo-5-fluorophenyl)acetate (CAS: 1214910-61-8)?
Ethyl 2-(2-bromo-5-fluorophenyl)acetate (CAS: 1214910-61-8) is used in the pharm...
How is 4-Methyl-2-benzofuran-1,3-dione (CAS: 4792-30-7) typically synthesized?
4-Methyl-2-benzofuran-1,3-dione (CAS: 4792-30-7) can be synthesized through seve...
What industries use 4,6-Dichloroquinoline-3-carbonitrile (CAS: 936498-04-3)?
4,6-Dichloroquinoline-3-carbonitrile (CAS: 936498-04-3) is used in the pharmaceu...
What are the main uses of Chloro[tris(para-trifluoromethylphenyl)phosphine]gold(I) (CAS: 385815-83-8)?
Chloro[tris(para-trifluoromethylphenyl)phosphine]gold(I) is primarily used in or...
Is 2-Bromo-5-nitrofuran (CAS: 823-73-4) safe?
2-Bromo-5-nitrofuran (CAS: 823-73-4) is generally considered safe when handled w...
How should 5-Bromo-2,3,4-trifluorobenzoic acid (CAS: 212631-85-1) be stored?
5-Bromo-2,3,4-trifluorobenzoic acid should be stored in a cool, dry place away f...
What are the main uses of Zinc bis(aminoacetate) (CAS: 7214-08-6)?
Zinc bis(aminoacetate) (CAS: 7214-08-6) is primarily used in the pharmaceutical ...
How should Adamantan-1-ylmethanol (CAS: 770-71-8) be stored?
Adamantan-1-ylmethanol should be stored in a cool, dry, and well-ventilated plac...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.













![Disodium (6R,7R)-7-{[(2R)-2-hydroxy-2-phenylacetyl]amino}-8-oxo-3-({[1-(sulfonatomethyl)-1H-tetrazol-5-yl]sulfanyl}methyl)-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate structure Disodium (6R,7R)-7-{[(2R)-2-hydroxy-2-phenylacetyl]amino}-8-oxo-3-({[1-(sulfonatomethyl)-1H-tetrazol-5-yl]sulfanyl}methyl)-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate structure](https://static.chemtradehub.com/structs/612/61270-78-8-6b58.webp)
![N-[(9Z)-9-Octadecen-1-yl]-1,3-propanediamine structure N-[(9Z)-9-Octadecen-1-yl]-1,3-propanediamine structure](https://static.chemtradehub.com/structs/717/7173-62-8-d43e.webp)