Reliable theoretical treatment of molecular clusters: Counterpoise-corrected potential energy surface and anharmonic vibrational frequencies of the water dimer

Literature Information

Publication Date
DOI 10.1039/A902109D
Impact Factor 3.676
Authors


View Original

Abstract

Structure, properties and energetics of the water dimer were determined by counterpoise (CP)-corrected gradient optimization which apriori eliminates the basis set superposition error (BSSE). Calculations were carried out at the MP2 level with various basis sets up to the aug-cc-pVQZ one. Besides harmonic vibrational frequencies twelve-dimensional anharmonic frequencies were also determined using the second-order perturbation treatment. Harmonic and anharmonic frequencies were based on CP-corrected Hessians. The equilibrium geometry of the dimer differs from that determined by a standard optimization and the difference becomes small only for the largest basis set (aug-cc-pVQZ). The best theoretical estimate of the intermolecular oxygen–oxygen distance (2.92 Å) is shorter than the experimental result of 2.95 Å. An estimate of the complete basis set limit of the stabilization energy was obtained by extrapolating the stabilization energies as a function of the reciprocal size of the basis set; this value (21.05 kJ mol-1) is slightly smaller than other literature estimates. Adding the changes due to zero-point energy and temperature-dependent enthalpy terms (determined using anharmonic frequencies obtained from the CP-corrected Hessian) we obtain an estimate to the theoretical stabilization enthalpy at 375 K (12.76 kJ mol-1) which is by 0.8–1.3 kJ mol-1 smaller than the literature results. Our theoretical value supports the very low limit of the experimental value. Red shift of the O–H stretching frequency accompanying formation of the dimer was determined at various theoretical levels and best agreement with the experimental value was found for anharmonic frequencies calculated with CP-corrected Hessians.

Related Literature

Towards “designer” surfaces: functionalisation of self-assembled monolayer (SAM) on colloidal gold by alkene metathesis‡

Debasis Samanta, Nicolas Faure, Francis Rondelez, Amitabha Sarkar

2003-04-16 Communication

DOI: 10.1039/B300833A

Halogen-induced selectivity in heterogeneous epoxidation is an electronic effect—fluorine, chlorine, bromine and iodine in the Ag-catalysed selective oxidation of ethene

Richard M. Lambert, Rachael L. Cropley, Alifiya Husain, Mintcho S. Tikhov

2003-04-16 Communication

DOI: 10.1039/B302620E

Ion-exchange synthesis and magneto-optical spectra of colored magnetic thin films composed of metal(ii) hexacyanochromate(iii)

Masanori Tozawa, Norimichi Kojima, Kazuhito Hashimoto

2003-04-22 Communication

DOI: 10.1039/B212861F

Photomediated asymmetric synthesis of (−)-cuparene

Richard S. Grainger, Aslam Patel

2003-03-31 Communication

DOI: 10.1039/B300815K

Remarkable effects of counter ions on scandium ion-promoted electron transfer reactions

Junpei Yuasa, Tomoyoshi Suenobu, Kei Ohkubo, Shunichi Fukuzumi

2003-04-02 Communication

DOI: 10.1039/B300543G

Bond energy M–C/H–C correlations: dual theoretical and experimental approach to the sensitivity of M–C bond strength to substituents

Eric Clot, Maria Besora, Feliu Maseras, Claire Mégret, Odile Eisenstein, Beatriz Oelckers, Robin N. Perutz

2003-01-24 Communication

DOI: 10.1039/B210036N

The first example of direct oxidation of sulfides to sulfones by an osmate molecular oxygen system

Boyapati M. Choudary, Chinta Reddy V. Reddy, Billakanti V. Prakash, Mannepalli L. Kantam, B. Sreedhar

2003-02-20 Communication

DOI: 10.1039/B212749K

A new organic superconductor, (DODHT)2BF4·H2O

Hiroyuki Nishikawa, Asami Machida, Takanobu Morimoto, Koichi Kikuchi, Takeshi Kodama, Isao Ikemoto, Jun-ichi Yamada, Harukazu Yoshino, Keizo Murata

2003-01-27 Communication

DOI: 10.1039/B211275B

Homolytic 1,5-transfer of chiral organosilicon groups from an enoxy oxygen to an alkoxy oxygen—implications for mechanism

Sonia M. Horvat, Sunggak Kim, Carl H. Schiesser

2003-04-16 Communication

DOI: 10.1039/B302307A

Fraction of the CoMoS phases accessible to NO in Co–Mo hydrodesulfurization catalysts

Yasuaki Okamoto, Masatoshi Kawano, Takeshi Kubota

2003-04-07 Communication

DOI: 10.1039/B301487H

You might also like

Compound Q&A

What precautions should be taken when handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3)?

When handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3), it ...

79206-94-34-(2-Furylmethyl)thi...
Compound Q&A

What precautions should be taken when handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9)?

When handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9), it...

71320-77-94-Chloro-N-[2-(4-mor...
Compound Q&A

How should waste containing 2-[2-(2-Methoxyethoxy)ethoxy]ethyl 4-methylbenzenesulfonate (CAS: 62921-74-8) be handled?

Waste containing this compound (CAS: 62921-74-8) should be handled according to ...

62921-74-82-[2-(2-Methoxyethox...
Compound Q&A

How should waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate be handled?

Waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate should be collected i...

40056-18-6(S)-Methyl 2-amino-3...
166882-70-85-({4-[(2S,4R)-4-Hyd...
Compound Q&A

Are there alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid (CAS: 7312-27-8) in synthesis?

There are several alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid in syn...

7312-27-8(2E)-3-(3,4-Dichloro...
Compound Q&A

How should Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84-9) be stored?

Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84...

925437-84-9Ethyl 6-(2-nitrophen...
Compound Q&A

How should waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) be handled?

Waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) should be coll...

18453-07-12-(1,3-Thiazol-2-yl)...
Compound Q&A

How is Methyl 5-iodo-2-methylbenzoate (CAS: 103440-54-6) typically synthesized?

Methyl 5-iodo-2-methylbenzoate can be synthesized through the iodination of meth...

103440-54-6Methyl 5-iodo-2-meth...
Compound Q&A

How is 5-Chloro[1,2,4]triazolo[1,5-a]pyridine (CAS: 1427399-34-5) typically synthesized?

5-Chloro[1,2,4]triazolo[1,5-a]pyridine is commonly synthesized via the condensat...

1427399-34-55-Chloro[1,2,4]triaz...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.