Potassium energy storage behavior of nickel–zinc co-doped Prussian blue analogs formed by a chelating-agent-assisted route and its application in a K+-proton hybrid-ion aqueous alkaline battery

Literature Information

Publication Date 2023-11-17
DOI 10.1039/D3NJ04095J
Impact Factor 3.591
Authors

Ruiqing Hua, Caiyun Xu, Dian Lin, Deyu Qu, Xi Li, Ruiming Zhang, Zhizhong Xie


View Original

Abstract

A series of nickel–zinc hexacyanoferrate (NixZnyHCF) was synthesized through a conventional co-precipitation method, and their potassium-ion storage performances were tested in a 30% KOH solution. Among these samples, Ni3Zn1HCF obtained the highest capacity (96.7 mA h g−1). After introducing the chelating agent in the synthetic procedure, the obtained Ni3Zn1HCF-10 sample displayed high crystallinity with reduced crystal water and improved cyclic stability (99.0% capacity retention after 350 cycles) over the sample prepared without involving the chelating agent (56.2% capacity retention after 250 cycles). Finally, a K+/H+ hybrid-ion aqueous alkaline battery was built with a Ni3Zn1HCF-10 cathode and an active carbon anode. The constructed full cell delivered a capacity of 44.8 mA h g−1 at a 1.6 V operational voltage. Further, it had excellent rate capability and low self-discharge along with good stability (99.6% capacity retention after 500 cycles). This study provides a great strategy for fabricating efficient rechargeable aqueous alkaline batteries.

Related Literature

Functionalized polycarbonates from dihydroxyacetone: insights into the immortal ring-opening polymerization of 2,2-dimethoxytrimethylene carbonate

Marion Helou, Jean-Michel Brusson, Jean-François Carpentier, Sophie M. Guillaume

2011-10-14 Communication

DOI: 10.1039/C1PY00405K

Preparation and applications of novel fluoroalkyl end-capped oligomeric nanocomposites

Hideo Sawada

2011-09-15 Review Article

DOI: 10.1039/C1PY00325A

Control of morphology in olefinpolymerization catalyzed by nickel diimine complexes encapsulated into polybutadiene based support

Zdeněk Hošt'álek, Jan Merna, Bertrand Heurtefeu, Henri Cramail

2012-01-12 Paper

DOI: 10.1039/C2PY00482H

Alkyne–azide coupling of tailored poly(vinylidene fluoride) and polystyrene for the synthesis of block copolymers

Radovan Vukićević, Ulrike Schwadtke, Simon Schmücker, Philipp Schäfer, Dirk Kuckling, Sabine Beuermann

2011-12-01 Paper

DOI: 10.1039/C1PY00427A

Synthesis of 3,3,3-trifluoropropene telomers and their modification into fluorosurfactants

Frédéric Boschet, Georgi Kostov, Bruno Ameduri, Andrew Jackson, Bernard Boutevin

2011-11-17 Paper

DOI: 10.1039/C1PY00394A

Polymer Chemistry: the future's bright

2011-11-22 Editorial

DOI: 10.1039/C1PY90038B

Upgrading of bio-oil and subsequent co-processing under FCC conditions for fuel production

Udo Armbruster, Hanan Atia, Ursula Bentrup, Binh Minh Quoc Phan, Reinhard Eckelt, Luong Huu Nguyen, Duc Anh Nguyen, Andreas Martin

2015-12-14 Paper

DOI: 10.1039/C5RE00068H

Synthesis of low-temperature benzocyclobutene cross-linker and utilization

Julia N. Dobish, Sharon K. Hamilton, Eva Harth

2012-01-30 Communication

DOI: 10.1039/C2PY00606E

A biocompatible, metal-free catalyst and its application in microwave-assisted synthesis of functional polyesters

Zhengwei You, Eric M. Jeffries, Yadong Wang

2011-11-29 Paper

DOI: 10.1039/C1PY00400J

Self-assembled poly(2-ethyl-2-oxazoline) fibers in aqueous solutions

Pınar Tatar Güner, Annamária Mikó, Florian F. Schweinberger

2011-12-01 Communication

DOI: 10.1039/C1PY00463H

You might also like

Compound Q&A

What industries use 4-(4-tert-Butylphenyl)-1H-pyrazol-3-amine (CAS: 1015845-73-4)?

4-(4-tert-Butylphenyl)-1H-pyrazol-3-amine finds applications in various industri...

1015845-73-44-(4-tert-Butylpheny...
Compound Q&A

What industries use H3TATAB (CAS: 63557-10-8)?

H3TATAB is used in the pharmaceutical industry for the synthesis of certain orga...

63557-10-8H3TATAB
Compound Q&A

What are the main uses of 1-Ethyl-3-fluorobenzene (CAS: 696-39-9)?

1-Ethyl-3-fluorobenzene (CAS: 696-39-9) is primarily used as a precursor in the ...

696-39-91-Ethyl-3-fluorobenz...
Compound Q&A

What are the main uses of 1-(tert-Butoxycarbonyl)-4-(4-methoxyphenyl)pyrrolidine-3-carboxylic acid (CAS: 851484-94-1)?

1-(tert-Butoxycarbonyl)-4-(4-methoxyphenyl)pyrrolidine-3-carboxylic acid is prim...

851484-94-11-(tert-Butoxycarbon...
Compound Q&A

What are the physical and chemical properties of 1-Cyclobutyl-4-piperidinone (CAS: 359880-05-0)?

1-Cyclobutyl-4-piperidinone (CAS: 359880-05-0) is a colorless or white crystalli...

359880-05-01-Cyclobutyl-4-piper...
Compound Q&A

What is Pyridine-2,6-dicarboxylic acid mono-tert-butyl ester (CAS: 575433-76-0)?

Pyridine-2,6-dicarboxylic acid mono-tert-butyl ester (CAS: 575433-76-0) is a che...

575433-76-0Pyridine-2,6-dicarbo...
Compound Q&A

What is the market or research trend for 2,3-Difluorophenylalanine (CAS: 236754-62-4)?

The market for 2,3-Difluorophenylalanine (CAS: 236754-62-4) is growing with incr...

236754-62-42,3-Difluorophenylal...
Compound Q&A

How is (2-Hydroxy-1-naphthyl)boronic acid (CAS: 898257-48-2) typically synthesized?

(2-Hydroxy-1-naphthyl)boronic acid can be synthesized through the reduction of 2...

898257-48-2(2-Hydroxy-1-naphthy...
1315351-28-0tert-Butyl (5-bromo-...
Compound Q&A

Are there alternatives to 5,7-Dihydroxy-4-oxo-2-(3,4,5-trihydroxyphenyl)-4H-chromen-3-yl beta-D-glucopyranoside (CAS: 19833-12-6) in synthesis?

While 5,7-Dihydroxy-4-oxo-2-(3,4,5-trihydroxyphenyl)-4H-chromen-3-yl beta-D-gluc...

19833-12-65,7-Dihydroxy-4-oxo-...

Source Journal

New Journal of Chemistry

New Journal of Chemistry
CiteScore: 5.3
Self-citation Rate: 3.7%
Articles per Year: 2153

NJC (New Journal of Chemistry) is a broad-based primary journal encompassing all branches of chemistry and its sub-disciplines. It contains full research articles, communications, perspectives and focus articles. This well-established journal, owned by the Centre National de la Recherche Scientifique (CNRS) of France, has been co-published with the Royal Society of Chemistry since January 1998. NJC is the forum for the publication of high-quality, original and significant work that opens new directions in chemistry or other scientific disciplines. In addition to having a significant chemical component, work published in NJC must demonstrate that it will have an impact on areas of research other than that of the reported work.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.