The more the better: on the formation of single-phase high entropy alloy nanoparticles as catalysts for the oxygen reduction reaction
Literature Information
Rebecca K. Pittkowski, Christian M. Clausen, Qinyi Chen, Dragos Stoian, Wouter van Beek, Jan Bucher, Rahel L. Welten, Nicolas Schlegel, Tobias M. Nielsen, Jia Du, Asger W. Rosenkranz, Espen D. Bøjesen, Jan Rossmeisl, Kirsten M. Ø. Jensen, Matthias Arenz
High entropy alloys (HEAs) are an important new material class with significant application potential in catalysis and electrocatalysis. The entropy-driven formation of HEA materials requires high temperatures and controlled cooling rates. However, catalysts in general also require highly dispersed materials, i.e., nanoparticles. Only then a favorable utilization of the expensive raw materials can be achieved. Several recently reported HEA nanoparticle synthesis strategies, therefore, avoid the high-temperature regime to prevent particle growth. In our work, we investigate a system of five noble metal single-source precursors with superior catalytic activity for the oxygen reduction reaction. Combining in situ X-ray powder diffraction with multi-edge X-ray absorption spectroscopy, we address the fundamental question of how single-phase HEA nanoparticles can form at low temperatures. It is demonstrated that the formation of HEA nanoparticles is governed by stochastic principles and the inhibition of precursor mobility during the formation process favors the formation of a single phase. The proposed formation principle is supported by simulations of the nanoparticle formation in a randomized process, rationalizing the experimentally found differences between two-element and multi-element metal precursor mixtures.
Related Literature
One-pot, three-component approach to diarylacetonitriles
Dileep Kumar Singh, Sure Siva Prasad, Jinhwang Kim, Ikyon Kim
DOI: 10.1039/C8QO01419A
Mechanical generation of isocyanate by mechanically induced retro [2 + 2] cycloaddition of a 1,2-diazetidinone mechanophore
Yangju Lin, Chia-Chih Chang, Stephen L. Craig
DOI: 10.1039/C9QO00262F
Iron-catalyzed reductive cyclization reaction of 1,6-enynes for the synthesis of 3-acylbenzofurans and thiophenes
Xiao-Feng Xia, Wei He, Guo-Wei Zhang, Dawei Wang
DOI: 10.1039/C8QO01190G
Organocatalytic asymmetric [4 + 1] annulation of in situ generated ortho-quinomethanes with 4-halo pyrazolones: straightforward access to chiral spiro-benzofuran pyrazolones
Ming-Ming Chu, Suo-Suo Qi, Yi-Feng Wang, Biao Wang, Zhen-Hui Jiang, Dan-Qian Xu, Zhen-Yuan Xu
DOI: 10.1039/C9QO00332K
Copper-catalysed C(sp3)–N coupling initiated by selective C–C bond cleavage of cyclobutanone oxime esters
Qing-Qiang Min, Na Li, Guang-Le Chen
DOI: 10.1039/C9QO00235A
Spirocyclization of keto-ynesulfonamides promoted by quaternary ammonium salts
Frédéric Beltran, Lucile Andna, Laurence Miesch
DOI: 10.1039/C8QO00937F
Metal-free tandem reaction synthesis of spiro-cyclopropyl fused pyrazolin-5-one derivatives
Man Liu, Chen-Fei Liu, Jing Zhang, Yan-Jun Xu, Lin Dong
DOI: 10.1039/C8QO01378K
Quantification of the hydrophobic effect using water-soluble super aryl-extended calix[4]pyrroles‡
DOI: 10.1039/C9QO00171A
Synthesis of a sumanenyl hafnocene complex‡
Toru Amaya, Shun Katoh, Toshiyuki Moriuchi, Toshikazu Hirao
DOI: 10.1039/C9QO00140A
You might also like
How should waste containing (6-Bromo-2-naphthyl)oxy](dimethyl)(2-methyl-2-propanyl)silane be handled?
Waste containing (6-Bromo-2-naphthyl)oxy](dimethyl)(2-methyl-2-propanyl)silane (...
How is 7-Fluoro-4-isoquinolinecarboxylic acid (CAS: 1841081-40-0) typically synthesized?
7-Fluoro-4-isoquinolinecarboxylic acid can be synthesized via a multi-step proce...
What are the physical and chemical properties of 2,3,5,6-Tetrabromothieno[3,2-b]thiophene (CAS: 124638-53-5)?
2,3,5,6-Tetrabromothieno[3,2-b]thiophene is a crystalline compound with a high m...
Is 1-[4-(Benzylamino)-7,8-dihydro-5H-pyrano[4,3-d]pyrimidin-2-yl]-2-methyl-1H-indole-4-carboxamide (CAS: 1542705-92-9) safe?
1-[4-(Benzylamino)-7,8-dihydro-5H-pyrano[4,3-d]pyrimidin-2-yl]-2-methyl-1H-indol...
What is the market or research trend for imidazo[5,1-d]-1,2,3,5-tetrazine-8-carboxylic acid, 3,4-dihydro-3-methyl-4-oxo- (CAS: 113942-30-6)?
The market for imidazo[5,1-d]-1,2,3,5-tetrazine-8-carboxylic acid, 3,4-dihydro-3...
What is 3-(Triisopropylsilyl)propiolaldehyde (CAS: 163271-80-5)?
3-(Triisopropylsilyl)propiolaldehyde is a synthetic organic compound with the CA...
What regulatory guidelines apply to 6-Nitro-2H-1,4-benzoxazin-3(4H)-one (CAS: 81721-87-1)?
6-Nitro-2H-1,4-benzoxazin-3(4H)-one (CAS: 81721-87-1) is subject to various regu...
How should waste containing (3-Fluorophenyl)(4-{[(2-methyl-2-propanyl)oxy]carbonyl}-1-piperazinyl)acetic acid (CAS: 885272-91-3) be handled?
Waste containing (3-Fluorophenyl)(4-{[(2-methyl-2-propanyl)oxy]carbonyl}-1-piper...
What are the physical and chemical properties of N,N'-4,4'-Biphenyldiyldiisonicotinamide (CAS: 55119-40-9)?
N,N'-4,4'-Biphenyldiyldiisonicotinamide is a white crystalline solid with a mole...
What industries use 6-Bromo-8-fluoro-2-quinazolinol (CAS: 1036756-15-6)?
6-Bromo-8-fluoro-2-quinazolinol is primarily used in the pharmaceutical industry...















