Recent progress in non-fused ring electron acceptors for high performance organic solar cells
Literature Information
Huanhuan Gao, Chenyang Han, Xiangjian Wan, Yongsheng Chen
In recent years, significant progress has been witnessed in organic solar cells (OSCs), which is mainly attributed to the new active layer materials design, especially fused ring acceptors. However, the majority of fused-ring acceptors suffer from complicated synthetic procedures and unsatisfactory reaction yields and thus high preparation cost. It is difficult to reconcile with the necessity for OPVs to demonstrate the low cost advantage compared with other photovoltaic technologies such as silicon or perovskite solar cells, thus significantly limiting the future application of OSCs. Therefore, it is necessary to develop high efficiency but low cost acceptor materials, i.e. non-fused ring electron acceptors (NFREAs). In this review, the recent development of NFREAs from the viewpoint of materials design is discussed. In the first and second sections, NFREAs with different central cores are reviewed. Then, the progress of fully non-fused NFREAs is summarized. Finally, an outlook on the remaining challenges to the field is provided. Keywords: Organic solar cells; Non-fused ring acceptors; Low cost; Intramolecular noncovalent interaction; Large steric hindrance.
Related Literature
Organocatalytic controlled/living ring-opening polymerization of 1,3,5-triphenyl-1,3,5-tri-p-tolylcyclotrisiloxane for the precise synthesis of fusible, soluble, functionalized, and solid poly[phenyl(p-tolyl)siloxane]s
Keita Fuchise, Kazuhiko Sato, Masayasu Igarashi
DOI: 10.1039/D1PY00652E
Preparing polythiophene derivative with alternating alkyl and thioalkyl side chains via Kumada coupling for efficient organic solar cells
Ziyi Xie, Qingyun Wei, Tong Shan, Xiaoyang Zheng, Yi Zhang, Hongliang Zhong
DOI: 10.1039/D1PY01051D
Gradient copolymer prepared from alternating ring-opening metathesis of three monomers
Francis O. Boadi, Nicole S. Sampson
DOI: 10.1039/D1PY00690H
Unprecedented coupling of natural rubber and ELP: synthesis, characterization and self-assembly properties
Tingting Zhang, Frédéric Peruch, Anne-Laure Wirotius, Emmanuel Ibarboure, Frédéric Rosu, Christophe Schatz, Bertrand Garbay
DOI: 10.1039/D1PY00969A
Multi-responsive, injectable, and self-healing hydrogels based on benzoxaborole–tannic acid complexation
Yi-Yang Peng, Qiuli Cheng, Wenda Wang, Meng Wu, Diana Diaz-Dussan, Piyush Kumar, Ravin Narain
DOI: 10.1039/D1PY00692D
A guide towards safe, functional and renewable BPA alternatives by rational molecular design: structure–property and structure–toxicity relationships
L. Trullemans, S.-F. Koelewijn, I. Scodeller, T. Hendrickx, P. Van Puyvelde, B. F. Sels
DOI: 10.1039/D1PY00909E
Organocatalytic PET-RAFT polymerization with a low ppm of organic photocatalyst under visible light
Xun Zhang, Yu Jiang, Junqiang Lin, Siping Hu
DOI: 10.1039/D1PY01431E
You might also like
How should waste containing (6-Bromo-2-naphthyl)oxy](dimethyl)(2-methyl-2-propanyl)silane be handled?
Waste containing (6-Bromo-2-naphthyl)oxy](dimethyl)(2-methyl-2-propanyl)silane (...
How is 7-Fluoro-4-isoquinolinecarboxylic acid (CAS: 1841081-40-0) typically synthesized?
7-Fluoro-4-isoquinolinecarboxylic acid can be synthesized via a multi-step proce...
What are the physical and chemical properties of 2,3,5,6-Tetrabromothieno[3,2-b]thiophene (CAS: 124638-53-5)?
2,3,5,6-Tetrabromothieno[3,2-b]thiophene is a crystalline compound with a high m...
Is 1-[4-(Benzylamino)-7,8-dihydro-5H-pyrano[4,3-d]pyrimidin-2-yl]-2-methyl-1H-indole-4-carboxamide (CAS: 1542705-92-9) safe?
1-[4-(Benzylamino)-7,8-dihydro-5H-pyrano[4,3-d]pyrimidin-2-yl]-2-methyl-1H-indol...
What is the market or research trend for imidazo[5,1-d]-1,2,3,5-tetrazine-8-carboxylic acid, 3,4-dihydro-3-methyl-4-oxo- (CAS: 113942-30-6)?
The market for imidazo[5,1-d]-1,2,3,5-tetrazine-8-carboxylic acid, 3,4-dihydro-3...
What is 3-(Triisopropylsilyl)propiolaldehyde (CAS: 163271-80-5)?
3-(Triisopropylsilyl)propiolaldehyde is a synthetic organic compound with the CA...
What regulatory guidelines apply to 6-Nitro-2H-1,4-benzoxazin-3(4H)-one (CAS: 81721-87-1)?
6-Nitro-2H-1,4-benzoxazin-3(4H)-one (CAS: 81721-87-1) is subject to various regu...
How should waste containing (3-Fluorophenyl)(4-{[(2-methyl-2-propanyl)oxy]carbonyl}-1-piperazinyl)acetic acid (CAS: 885272-91-3) be handled?
Waste containing (3-Fluorophenyl)(4-{[(2-methyl-2-propanyl)oxy]carbonyl}-1-piper...
What are the physical and chemical properties of N,N'-4,4'-Biphenyldiyldiisonicotinamide (CAS: 55119-40-9)?
N,N'-4,4'-Biphenyldiyldiisonicotinamide is a white crystalline solid with a mole...
What industries use 6-Bromo-8-fluoro-2-quinazolinol (CAS: 1036756-15-6)?
6-Bromo-8-fluoro-2-quinazolinol is primarily used in the pharmaceutical industry...















