Phase separation in pore-spanning membranes induced by differences in surface adhesion

Literature Information

Publication Date 2020-04-08
DOI 10.1039/D0CP00335B
Impact Factor 3.676
Authors

Jeremias Sibold, Vera E. Tewaag, Thomas Vagedes, Ingo Mey


View Original

Abstract

Lipid domains in plasma membranes act as molecular sorting platforms for e.g., signalling processes. In model membranes, such as freestanding or supported bilayers, some lipid domains with defined chemical composition, lipid packing and physical behaviour can be reproduced. However, in vivo, the plasma membrane experiences a proteinaceous scaffold underneath, which can sort, compartmentalize and recruit components within the membrane. The influence of such scaffolds on the phase behaviour of lipid membranes has been barely studied. Here, we investigated the partial attachment of a membrane to a support and its influence on the phase behaviour using pore-spanning membranes (PSMs). PSMs were prepared on SiOx=1–2 functionalized silicon substrates with 1.2 μm-sized pores by spreading giant unilamellar vesicles (GUVs) composed of DOPC/sphingomyelin (1 : 1) with different cholesterol concentrations. Using two different fluorophores, PSMs were visualized by fluorescence microscopy allowing us to distinguish between different membrane phases, a gel (lβ), a liquid ordered (lo), and a liquid disordered (ld) phase. At low cholesterol concentrations, coexistence of lβ and ld was found, while at higher cholesterol concentrations, coexistence of lo and ld was predominant. Below the mixing temperature, determined by temperature scans, the more ordered phase was always found in the freestanding PSMs, whereas the ld-phase was present in the supported PSMs. We attribute this lipid sorting to a stronger adhesion of the ld-phase lipids to the underlying scaffold. The difference in adhesion alters the phase behaviour from a nominal DOPC/sphingomyelin (1 : 1) mixture to a DOPC/sphingomyelin (1 : 2–1 : 4) mixture compared to phase diagrams obtained from GUVs highlighting the importance of differential adhesive surfaces on lipid domain formation.

Related Literature

A tethered bilayer lipid membrane that mimics microbial membranes

Jakob Andersson, Melanie A. Fuller, Kathleen Wood, Stephen A. Holt, Ingo Köper

2018-04-27 Paper

DOI: 10.1039/C8CP01346B

Kinetics in the real world: linking molecules, processes, and systems

Katharina Kohse-Höinghaus, Jürgen Troe, Jens-Uwe Grabow, Matthias Olzmann, Gernot Friedrichs, Klaus-Dieter Hungenberg

2018-04-04 Editorial

DOI: 10.1039/C8CP90054J

Voltage and partial pressure dependent defect chemistry in (La,Sr)FeO3−δ thin films investigated by chemical capacitance measurements

Alexander Schmid, Ghislain M. Rupp, Jürgen Fleig

2018-04-05 Paper

DOI: 10.1039/C7CP07845E

Mechanistic insights into the interaction between energetic oxygen ions and nanosized ZnFe2O4: XAS-XMCD investigations

Jitendra Pal Singh, Baljeet Kaur, Aditya Sharma, So Hee Kim, Sanjeev Gautam, Ramesh Chandra Srivastava, Navdeep Goyal, Weol Cheol Lim, H.-J. Lin, J. M. Chen, K. Asokan, D. Kanjilal, Sung Ok Won, Ik-Jae Lee, Keun Hwa Chae

2018-04-03 Paper

DOI: 10.1039/C8CP00368H

Coupling free radical catalysis, climate change, and human health

C. E. Clapp

2018-04-11 Perspective

DOI: 10.1039/C7CP08331A

Surface modification effects on defect-related photoluminescence in colloidal CdS quantum dots

TaeGi Lee, Kunio Shimura, DaeGwi Kim

2018-04-13 Paper

DOI: 10.1039/C7CP07812A

Theoretical determination of adsorption and ionisation energies of polycyclic aromatic hydrocarbons on water ice

Nadia Ben Amor, Mathias Rapacioli, Jennifer A. Noble, Joëlle Mascetti, Céline Toubin, Aude Simon

2018-04-11 Paper

DOI: 10.1039/C8CP01175C

Contents list

Front/Back Matter

DOI: 10.1039/C8CP91746A

You might also like

155412-88-71-(3-Aminophenyl)-3-...
Compound Q&A

How should waste containing 1-(D-Ribofuranosyl)-1,4-dihydro-3-pyridinecarboxamide (CAS: 19132-12-8) be handled?

Waste containing 1-(D-Ribofuranosyl)-1,4-dihydro-3-pyridinecarboxamide (CAS: 191...

19132-12-81-(D-Ribofuranosyl)-...
Compound Q&A

What regulatory guidelines apply to 2-Methyl-2-propanyl 3-bromo-3-(hydroxymethyl)-1-azetidinecarboxylate (CAS: 2007919-81-3)?

2-Methyl-2-propanyl 3-bromo-3-(hydroxymethyl)-1-azetidinecarboxylate (CAS: 20079...

2007919-81-32-Methyl-2-propanyl ...
Compound Q&A

What is N-(4-Chloro-2-pyridinyl)acetamide (CAS: 245056-66-0)?

N-(4-Chloro-2-pyridinyl)acetamide (CAS: 245056-66-0) is a chemical compound with...

245056-66-0N-(4-Chloro-2-pyridi...
Compound Q&A

What is 5-Chloro-2-hydroxybenzoic acid (CAS: 321-14-2)?

5-Chloro-2-hydroxybenzoic acid, also known as 5-chlorosalicylic acid, is an arom...

321-14-25-Chloro-2-hydroxybe...
Compound Q&A

What precautions should be taken when handling 1,1-Dichloro-1-fluoroethane (CAS: 1717-00-6)?

When handling 1,1-Dichloro-1-fluoroethane (CAS: 1717-00-6), it is important to u...

1717-00-61,1-Dichloro-1-fluor...
Compound Q&A

What are the physical and chemical properties of Fmoc-(2S,3R)-3-phenylpyrrolidine-2-carboxylic acid (CAS: 281655-32-1)?

Fmoc-(2S,3R)-3-phenylpyrrolidine-2-carboxylic acid is a white crystalline solid ...

281655-32-1Fmoc-(2S,3R)-3-pheny...
Compound Q&A

What are the main uses of 4-Amino-5-bromo-2-pyridinecarboxylic acid (CAS: 1363381-01-4)?

4-Amino-5-bromo-2-pyridinecarboxylic acid is primarily used as a precursor in th...

1363381-01-44-Amino-5-bromo-2-py...
1007881-98-2(S)-tert-butyl 2-((2...
Compound Q&A

What precautions should be taken when handling 8-bromo-2,2-dimethyl-3,4-dihydro-2H-1,4-benzoxazin-3-one (CAS: 688363-73-7)?

When handling 8-bromo-2,2-dimethyl-3,4-dihydro-2H-1,4-benzoxazin-3-one, use prop...

688363-73-78-bromo-2,2-dimethyl...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.