Photon management properties of Yb-doped SnO2 nanoparticles synthesized by the sol–gel technique

Literature Information

Publication Date 2019-09-11
DOI 10.1039/C9CP01993F
Impact Factor 3.676
Authors

Karima Bouras, Guy Schmerber, Damien Aureau, Hervé Rinnert, Jean-Luc Rehspringer, Dris Ihiawakrim, Aziz Dinia, Abdelilah Slaoui, Silviu Colis


View Original

Abstract

SnO2 is a transparent large band gap semiconductor, particularly interesting for optoelectronic and photovoltaic devices, mainly because its conduction can be easily tuned by doping or by modulating the amount of oxygen vacancies. Besides, rare earth doping was successfully exploited for up conversion properties. Here we report on the functionalization of SnO2 nanoparticles with optically active Yb3+ ions using the sol–gel method, which allows UV to NIR spectral (down) conversion. As starting solutions we used stable non-alkoxide metal–organic compounds, which is rather uncommon. Transmission electron microscopy analysis demonstrated the formation of small well-crystallized nanoparticles while X-ray photoelectron spectroscopy measurements have revealed that the Yb is well inserted in the host matrix and has a 3+ valence state. All nanoparticles present large absorption in the UV-visible range (250 to 550 nm) and a band gap that decreases down to 2.72 eV upon doping. The UV energy converted into NIR on the basis of efficient energy transfer from SnO2 to the Yb3+ ions ranges between 250 and 400 nm. Reference undoped SnO2 nanoparticles with a mean size of 20 nm allow converting UV light into broad visible emission centered at 650 nm. The incorporation of up to 3.5 at% of Yb3+ ions into the SnO2 host matrix results in a spectacular decrease of the nanoparticle size down to 6.6 nm. This allowed also the shift of the photoluminescence to NIR in the 970–1050 nm range. The energy level structure of Yb3+ in SnO2 was successfully determined from the deconvolution of the Yb emission. This emission is significantly enhanced by increasing the doping level. All optical measurements suggest that these nanoparticles can be efficiently used as down-shifting converters.

Related Literature

Self-assembly of block copolymers on lithographically patterned template with ordered posts

Dan Xu, Yao-Hong Xue, Yan-Bo Sun

2015-11-03 Paper

DOI: 10.1039/C5CP05449D

Testing the transferability of a coarse-grained model to intrinsically disordered proteins

Gil O. Rutter, David Quigley, Tiffany R. Walsh

2015-11-05 Paper

DOI: 10.1039/C5CP05652G

High-performance formaldehyde gas-sensors based on three dimensional center-hollow ZnO

Linqi Shi, Jiabao Cui, Fei Zhao, Dejun Wang, Tengfeng Xie, Yanhong Lin

2015-10-29 Paper

DOI: 10.1039/C5CP05935F

TD-DFT study of the light-induced spin crossover of Fe(iii) complexes

Sergi Saureu

2015-12-02 Paper

DOI: 10.1039/C5CP06620D

Size-dependent strain and surface energies of gold nanoclusters

S. Ali, V. S. Myasnichenko, E. C. Neyts

2015-11-18 Paper

DOI: 10.1039/C5CP06153A

An EPR study of ampullosporin A, a medium-length peptaibiotic, in bicelles and vesicles

Annalisa Dalzini, Fernando Formaggio, Claudio Toniolo, Marina Gobbo, Anna Lisa Maniero

2015-11-19 Paper

DOI: 10.1039/C5CP04136H

Pure and almost pure NIR emission of Tm and Tm,Yb–CeO2 under UV, X-ray and NIR up-conversion excitation: key roles of level selective antenna sensitization and charge-compensation

Daniel Avram, Bogdan Cojocaru, Adriana Urda, Ion Tiseanu, Mihaela Florea, Carmen Tiseanu

2015-09-15 Communication

DOI: 10.1039/C5CP03458B

The role of copper in the thermal conductivity of thermoelectric oxychalcogenides: do lone pairs matter?

P. Vaqueiro, R. A. R. Al Orabi, G. Guélou, A. V. Powell, R. I. Smith, J.-P. Song, D. Wee, M. Fornari

2015-11-06 Paper

DOI: 10.1039/C5CP06192J

You might also like

Compound Q&A

Is 6-(3-Fluorophenyl)picolinic acid (CAS: 887982-40-3) safe?

6-(3-Fluorophenyl)picolinic acid is generally considered safe for laboratory use...

887982-40-36-(3-Fluorophenyl)pi...
Compound Q&A

What industries use (3R)-3-Pyrrolidinol (CAS: 2799-21-5)?

(3R)-3-Pyrrolidinol is used in the pharmaceutical industry as a precursor for dr...

2799-21-5(3R)-3-Pyrrolidinol
Compound Q&A

What precautions should be taken when handling (4R,5R)-4,5-Diethoxycarbonyl-2,2-dimethyldioxolane (CAS: 59779-75-8)?

When handling (4R,5R)-4,5-Diethoxycarbonyl-2,2-dimethyldioxolane (CAS: 59779-75-...

59779-75-8(4R,5R)-4,5-Diethoxy...
Compound Q&A

How is 1-(6-Chloroimidazo[1,2-b]pyridazin-3-yl)ethanone (CAS: 90734-71-7) typically synthesized?

1-(6-Chloroimidazo[1,2-b]pyridazin-3-yl)ethanone is often synthesized via a mult...

90734-71-71-(6-Chloroimidazo[1...
Compound Q&A

What is the market or research trend for N-Ethyl-3,4-dimethylbenzylamine (CAS: 39180-83-1)?

The market for N-Ethyl-3,4-dimethylbenzylamine (CAS: 39180-83-1) remains steady,...

39180-83-1N-Ethyl-3,4-dimethyl...
Compound Q&A

What is Tert-butyl 3-(pyrrolidin-1-yl)azetidine-1-carboxylate (CAS: 1019008-21-9)?

Tert-butyl 3-(pyrrolidin-1-yl)azetidine-1-carboxylate is a chemical compound wit...

1019008-21-9Tert-butyl 3-(pyrrol...
Compound Q&A

What regulatory guidelines apply to 1-Bromo-3-chloro-2,4-dimethoxybenzene (CAS: 1228956-93-1)?

1-Bromo-3-chloro-2,4-dimethoxybenzene (CAS: 1228956-93-1) falls under the classi...

1228956-93-11-Bromo-3-chloro-2,4...
Compound Q&A

Is 8-Bromo-2-methyl-3,4-dihydroisoquinolin-1(2H)-one (CAS: 1368622-07-4) safe?

The safety of 8-Bromo-2-methyl-3,4-dihydroisoquinolin-1(2H)-one (CAS: 1368622-07...

1368622-07-48-Bromo-2-methyl-3,4...
Compound Q&A

Is Benzyl [(3S)-2,6-dioxo-3-piperidinyl]carbamate (CAS: 22785-43-9) safe?

Benzyl [(3S)-2,6-dioxo-3-piperidinyl]carbamate is generally safe when handled wi...

22785-43-9Benzyl [(3S)-2,6-dio...
Compound Q&A

How should 1-{[4-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]sulfonyl}pyrrolidine (CAS: 928657-21-0) be stored?

1-{[4-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]sulfonyl}pyrrolidine s...

928657-21-01-{[4-(4,4,5,5-Tetra...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.