A label-free aptamer-based nanogap capacitive biosensor with greatly diminished electrode polarization effects

Literature Information

Publication Date 2018-12-06
DOI 10.1039/C8CP05510F
Impact Factor 3.676
Authors

Zahra Saribal, Cordula Kemp, Alex Iles, Nicole Pamme


View Original

Abstract

A significant impediment to the use of impedance spectroscopy in bio-sensing is the electrode polarization effect that arises from the movement of free ions to the electrode–solution interface, forming an electrical double layer (EDL). The EDL screens the dielectric response of the bulk and its large capacitance dominates the signal response at low frequency, masking information particularly relevant for biological samples, such as molecular conformation changes and DNA hybridization. The fabrication of nanogap capacitors with electrode separation less than the EDL thickness can significantly reduce electrode polarization effects and provide enormous improvement in sensitivity due to better matching of the sensing volume with the size of the target entities. We report on the fabrication of a horizontal thin-film nanogap capacitive sensor with electrode separation of 40 nm that shows almost no electrode polarization effects when measured with water and ionic buffer solutions, thereby allowing direct quantification of their relative permittivity at low frequencies. Surface modification of the electrodes with thiol-functionalized single strand DNA aptamers transforms the device into a label-free biosensor with high sensitivity and selectivity towards the detection of a specific protein. Using this approach, we have developed a biosensor for the detection of human alpha thrombin. In addition, we also examine frequency dependent permittivity measurements on high ionic strength solutions contained within the nanogap and discuss how these support recent experimental observations of large Debye lengths. A large shift in the Debye relaxation frequency to lower frequency is also found, which is consistent with water molecules being in a rigid-like state, possibly indicating the formation of an ordered “ice-like” phase. Altogether, this work highlights the need for better understanding of fluids in confined, nanoscale geometries, from which important new applications in sensing may arise.

Related Literature

Valence bond all the way: From the degenerate H-exchange to cytochrome P450

Sason Shaik

2010-06-24 Perspective

DOI: 10.1039/C001372M

Modification of the chiral selectivity of d-glucose oxidase and l-lactate oxidase in a collagen matrix‡

Ritu Kataky, Ruzniza Mohamed Zawawi

2010-07-22 Paper

DOI: 10.1039/C003933K

Back cover

Front/Back Matter

DOI: 10.1039/C0CP90036B

Thiol-capped CdTenanocrystals: progress and perspectives of the related research fields

Nikolai Gaponik, Andrey L. Rogach

2010-06-11 Perspective

DOI: 10.1039/C000916D

Back cover

Front/Back Matter

DOI: 10.1039/C0CP90069A

Co nanoparticles inserted into a porous carbon amorphous matrix: the role of cooling field and temperature on the exchange bias effect

María Paz Fernández-García, Pedro Gorria, Marta Sevilla, Antonio B. Fuertes, Roberto Boada, Jesús Chaboy, Giuliana Aquilanti, Jesús A. Blanco

2010-11-29 Communication

DOI: 10.1039/C0CP00396D

In situSTM study of the adsorption and electropolymerization of o-, m-, and p-ethylaniline molecules on Au(111)electrode

Sihzih Chen, Chonzan Hwuang, HsinLing Tu, ChunGuey Wu, ShuehLin Yau, LiangJen Fan, YawWen Yang

2010-07-07 Paper

DOI: 10.1039/B924035G

New organic–inorganic hybrid microporous organosilica having high metal ion adsorption capacity

Manidipa Paul, Nabanita Pal, P. R. Rajamohanan, Bharat S. Rana, Anil K. Sinha, Asim Bhaumik

2010-07-07 Paper

DOI: 10.1039/B925619A

A density-functional theory study of electrochemical adsorption of sulfuric acid anions on Pt(111)

Juan A. Santana, Carlos R. Cabrera, Yasuyuki Ishikawa

2010-06-28 Paper

DOI: 10.1039/C000981D

Rovibrational levels of HD

Krzysztof Pachucki, Jacek Komasa

2010-08-05 Paper

DOI: 10.1039/C0CP00209G

You might also like

Compound Q&A

How should waste containing N-Methoxy-N-methyl-1,3-thiazole-5-carboxamide (CAS: 898825-89-3) be handled?

Waste containing N-Methoxy-N-methyl-1,3-thiazole-5-carboxamide (CAS: 898825-89-3...

898825-89-3N-Methoxy-N-methyl-1...
Compound Q&A

How should N-(4-Biphenylyl)dibenzo[b,d]furan-4-amine (CAS: 1318338-47-4) be stored?

N-(4-Biphenylyl)dibenzo[b,d]furan-4-amine should be stored in a tightly sealed c...

1318338-47-4N-(4-Biphenylyl)dibe...
Compound Q&A

What is the market or research trend for 3-Acetamido-5-amino-2,4,6-triiodobenzoic acid (CAS: 1713-07-1)?

The market for 3-Acetamido-5-amino-2,4,6-triiodobenzoic acid (CAS: 1713-07-1) is...

1713-07-13-Acetamido-5-amino-...
Compound Q&A

How should Benzyl 2-O-acetyl-3,4,6-tri-O-benzyl-beta-D-galactopyranoside (CAS: 61820-03-9) be stored?

Benzyl 2-O-acetyl-3,4,6-tri-O-benzyl-beta-D-galactopyranoside (CAS: 61820-03-9) ...

61820-03-9Benzyl 2-O-acetyl-3,...
Compound Q&A

What regulatory guidelines apply to 2-Ethylpiperazine dihydrochloride (CAS: 438050-52-3)?

2-Ethylpiperazine dihydrochloride (CAS: 438050-52-3) is regulated under the Glob...

438050-52-32-Ethylpiperazine di...
Compound Q&A

What regulatory guidelines apply to 1,1'-[1,3-Phenylenebis(methylene)]bis(3-methyl-1H-pyrrole-2,5-dione) (CAS: 119462-56-5)?

1,1'-[1,3-Phenylenebis(methylene)]bis(3-methyl-1H-pyrrole-2,5-dione) (CAS: 11946...

119462-56-51,1'-[1,3-Phenyleneb...
Compound Q&A

Are there alternatives to 5-Fluoro-2-(1-pyrrolidinyl)pyridine (CAS: 1287217-79-1) in synthesis?

Several alternatives can be used in the synthesis of 5-Fluoro-2-(1-pyrrolidinyl)...

1287217-79-15-Fluoro-2-(1-pyrrol...
Compound Q&A

What precautions should be taken when handling 6-Bromoimidazo[1,2-a]pyridin-8-amine (CAS: 676371-00-9)?

When handling 6-Bromoimidazo[1,2-a]pyridin-8-amine, it is important to wear appr...

676371-00-96-Bromoimidazo[1,2-a...
Compound Q&A

Are there alternatives to (2S,4R)-4-(4-Nitrobenzyl)pyrrolidine-2-carboxylic acid hydrochloride (CAS: 1049740-22-8) in synthesis?

Alternatives to (2S,4R)-4-(4-Nitrobenzyl)pyrrolidine-2-carboxylic acid hydrochlo...

1049740-22-8(2S,4R)-4-(4-Nitrobe...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.