Hybrid single-chain nanoparticles via the metal induced crosslinking of N-donor functionalized polymer chains
Literature Information
Karen Freytag, Stefanie Säfken, Kai Wolter, Jan C. Namyslo, Eike G. Hübner
Single-chain nanoparticles (SCNPs) formed via the crosslinking of isolated polymer chains in highly diluted solutions represent a conveniently achievable class of well-defined small particles. Due to their partly swollen geometry, they provide huge surface areas along the polymer chain. Herein, we present a set of copolymers based on poly(n-butyl acrylate-co-4-vinylpyridine) with molecular weights ranging from 6000 to 70 000 g mol−1 and an amount of metal binding sites ranging from 3 to 22 mol%. These organosoluble precursors with hydrophobic side chains were treated with Cu2+, Co2+, Ni2+, Zn2+, Fe2+, Mg2+, and Pd2+. The coordination of metal ions to pyridine moieties as versatile N-donors leads to intrachain crosslinking and subsequent chain collapse. Overall, a set of 34 hybrid SCNPs was prepared. SCNP formation was monitored by dynamic light scattering and diffusion ordered NMR spectroscopy. The influence of the molecular weight, the molecular weight distribution, and the amount of binding sites on size reduction during SCNP formation is discussed in the context of models given in the literature. Additionally, an indication for the dependency of size reduction on the coordinative bond strength is given. Selected crosslinking metal centres have been analyzed by theoretical investigations. A significant freedom for the coordination geometry which can induce chain collapse is revealed.
Related Literature
Direct visualisation of micelles of Pluronic block copolymers in aqueous solution by cryo-TEM
DOI: 10.1039/A902369K
pH and Ca2+ dependent interaction of Annexin V with phospholipid membranes: a combined study using fluorescence techniques, microelectrophoresis and infrared spectroscopy
H. Binder, G. Köhler, K. Arnold, O. Zschörnig
DOI: 10.1039/B003033N
A simultaneous FT-Raman–DSC (SRD) study of polymorphism in sn-1,3-distearoyl-2-oleoylglycerol (SOS)
John C. Sprunt, Upali A. Jayasooriya, Reginald H. Wilson
DOI: 10.1039/B003894F
Laser induced ionisation/dissociation of cyclopentanone in the 320–370 nm region
DOI: 10.1039/A902027F
Isobaric heat capacity in non-reacting and in reacting systems
DOI: 10.1039/B002375M
Structures and phase transitions in aqueous dispersions of branched-chain glycerophosphoethanolamines
Frank Bringezu, Gert Rapp, Bodo Dobner, Peter Nuhn, Gerald Brezesinski
DOI: 10.1039/B003516P
Spectroscopic evidence for adsorption-induced polymerisation of terthiophene at silver surfaces
Giuseppe Compagnini, Angela De Bonis, Rosario S. Cataliotti, Giovanni Marletta
DOI: 10.1039/B005892K
You might also like
What precautions should be taken when handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3)?
When handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3), it ...
What precautions should be taken when handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9)?
When handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9), it...
How should waste containing 2-[2-(2-Methoxyethoxy)ethoxy]ethyl 4-methylbenzenesulfonate (CAS: 62921-74-8) be handled?
Waste containing this compound (CAS: 62921-74-8) should be handled according to ...
How should waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate be handled?
Waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate should be collected i...
How is 5-({4-[(2S,4R)-4-Hydroxy-2-methyltetrahydro-2H-pyran-4-yl]-2-thienyl}sulfanyl)-1-methyl-1,3-dihydro-2H-indol-2-one (CAS: 166882-70-8) typically synthesized?
This compound can be synthesized using a multi-step process involving the conjug...
Are there alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid (CAS: 7312-27-8) in synthesis?
There are several alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid in syn...
How should Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84-9) be stored?
Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84...
How should waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) be handled?
Waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) should be coll...
How is Methyl 5-iodo-2-methylbenzoate (CAS: 103440-54-6) typically synthesized?
Methyl 5-iodo-2-methylbenzoate can be synthesized through the iodination of meth...
How is 5-Chloro[1,2,4]triazolo[1,5-a]pyridine (CAS: 1427399-34-5) typically synthesized?
5-Chloro[1,2,4]triazolo[1,5-a]pyridine is commonly synthesized via the condensat...
Source Journal
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.










![4-{2-[4-(2-Methyl-2-propanyl)phenyl]ethoxy}quinazoline structure 4-{2-[4-(2-Methyl-2-propanyl)phenyl]ethoxy}quinazoline structure](https://static.chemtradehub.com/structs/120/120928-09-8-d3db.webp)

![5-Acetyl-2,3-dihydrobenzo[b]furan structure 5-Acetyl-2,3-dihydrobenzo[b]furan structure](https://static.chemtradehub.com/structs/908/90843-31-5-eea4.webp)

![1,2-Diphenyl-4-[2-(phenylsulfinyl)ethyl]-3,5-pyrazolidinedione structure 1,2-Diphenyl-4-[2-(phenylsulfinyl)ethyl]-3,5-pyrazolidinedione structure](https://static.chemtradehub.com/structs/57-/57-96-5-efcc.webp)