Do group 1 metal salts form deep eutectic solvents?

Literature Information

Publication Date 2016-08-26
DOI 10.1039/C6CP05880A
Impact Factor 3.676
Authors

A. P. Abbott, C. D'Agostino, S. J. Davis, L. F. Gladden, M. D. Mantle


View Original

Abstract

Mixtures of metal salts such as ZnCl2, AlCl3 and CrCl3·6H2O form eutectic mixtures with complexing agents, such as urea. The aim of this research was to see if alkali metal salts also formed eutectics in the same way. It is shown that only a limited number of sodium salts form homogeneous liquids at ambient temperatures and then only with glycerol. None of these mixtures showed eutectic behaviour but the liquids showed the physical properties similar to the group of mixtures classified as deep eutectic solvents. This study focussed on four sodium salts: NaBr, NaOAc, NaOAc·3H2O and Na2B4O7·10H2O. The ionic conductivity and viscosity of these salts with glycerol were studied, and it was found that unlike previous studies of quaternary ammonium salts with glycerol, where the salt decreased the viscosity, most of the sodium salts increased the viscosity. This suggests that sodium salts have a structure making effect on glycerol. This phenomenon is probably due to the high charge density of Na+, which coordinates to the glycerol. 1H and 23Na NMR diffusion and relaxation methods have been used to understand the molecular dynamics in the glycerol–salt mixtures, and probe the effect of water on some of these systems. The results reveal a complex dynamic behaviour of the different species within these liquids. Generally, the translational dynamics of the 1H species, probed by means of PFG NMR diffusion coefficients, is in line with the viscosity of these liquids. However, 1H and 23Na T1 relaxation measurements suggest that the Na-containing species also play a crucial role in the structure of the liquids.

Related Literature

Intramolecular base-accelerated radical-scavenging reaction of a planar catechin derivative bearing a lysine moiety

Kiyoshi Fukuhara, Kei Ohkubo, Yoshinori Obara, Ayako Tada, Kohei Imai, Akiko Ohno, Asao Nakamura, Shiro Urano, Shinichi Saito, Shunichi Fukuzumi, Kazunori Anzai, Haruhiro Okuda

2009-09-14 Communication

DOI: 10.1039/B913714A

Polyoxometalate-based {MnIII2}–Schiff base composite materials exhibiting single-molecule magnet behaviour

Qiong Wu, Yang-Guang Li, Yong-Hui Wang, Ying Lu, En-Bo Wang

2009-09-03 Communication

DOI: 10.1039/B909246C

Catalytic membrane-installed microchannel reactors for one-second allylic arylation

Yoichi M. A. Yamada, Kaoru Torii

2009-08-18 Communication

DOI: 10.1039/B912696A

Electrical control of cell density gradients on a conducting polymer surface

Alwin M. D. Wan, Daniel J. Brooks, Abdurrahman Gumus, Claudia Fischbach, George G. Malliaras

2009-07-21 Communication

DOI: 10.1039/B911130A

Unique porous microspheres with dense core and a porous layer prepared by a novel S/O/W emulsion technique

Chika Takai, Tadashi Hotta, Shuji Shiozaki, Yaowalak Boonsongrit, Hiroya Abe

2009-08-27 Communication

DOI: 10.1039/B907786C

Direct assessment of molecular transport in mordenite: dominance of surface resistances

Lei Zhang, Christian Chmelik, Adri N. C. van Laak, Jörg Kärger, Petra E. de Jongh, Krijn P. de Jong

2009-09-08 Communication

DOI: 10.1039/B914391B

Saturation transfer difference NMR reveals functionally essential kinetic differences for a sugar-binding repressor protein

Ignacio Pérez-Victoria, Sebastian Kemper, Mitul K. Patel, John M. Edwards, James C. Errey, Lucia F. Primavesi, Matthew J. Paul, Timothy D. W. Claridge, Benjamin G. Davis

2009-08-19 Communication

DOI: 10.1039/B913489A

Ionic nano-convection in anodisation of aluminium plate

Shijing Lu, Zixue Su, Jian Sha, Wuzong Zhou

2009-08-06 Communication

DOI: 10.1039/B909256K

Discrimination of cryptochirality in chiral isotactic polystyrene by asymmetric autocatalysis

Christiane Hohberger, Yuko Araki, Kunihiko Hatase, Klaus Beckerle, Jun Okuda

2009-08-21 Communication

DOI: 10.1039/B912813A

You might also like

Compound Q&A

What precautions should be taken when handling lithium chloride hydrate (1:1:1) (CAS: 16712-20-2)?

When handling lithium chloride hydrate (1:1:1) (CAS: 16712-20-2), it is importan...

16712-20-2Lithium chloride hyd...
Compound Q&A

Is 4-(4H-1,2,4-Triazol-4-yl)piperidine (CAS: 690261-92-8) safe?

4-(4H-1,2,4-Triazol-4-yl)piperidine is generally considered safe for use in phar...

690261-92-84-(4H-1,2,4-Triazol-...
Compound Q&A

How should waste containing 1,3-Thiazole-2-carboxamide (CAS: 16733-85-0) be handled?

Waste containing 1,3-Thiazole-2-carboxamide (CAS: 16733-85-0) should be collecte...

16733-85-01,3-Thiazole-2-carbo...
Compound Q&A

What regulatory guidelines apply to 5-(Difluoromethyl)-2-fluorobenzonitrile (CAS: 934175-58-3)?

5-(Difluoromethyl)-2-fluorobenzonitrile (CAS: 934175-58-3) is subject to regulat...

934175-58-35-(Difluoromethyl)-2...
Compound Q&A

How is Methyl 3-acetamido-2-thiophenecarboxylate (CAS: 22288-79-5) typically synthesized?

Methyl 3-acetamido-2-thiophenecarboxylate can be synthesized by the reaction of ...

22288-79-5Methyl 3-acetamido-2...
Compound Q&A

What is 4-Isoquinolinecarbonitrile (CAS: 34846-65-6)?

4-Isoquinolinecarbonitrile is a chemical compound with the CAS number 34846-65-6...

34846-65-64-Isoquinolinecarbon...
Compound Q&A

How should Methyl 1H-1,2,3-triazole-4-carboxylate (CAS: 877309-59-6) be stored?

Store Methyl 1H-1,2,3-triazole-4-carboxylate (CAS: 877309-59-6) in a cool, dry p...

877309-59-6Methyl 1H-1,2,3-tria...
Compound Q&A

What regulatory guidelines apply to 6-Bromo[1,3]thiazolo[5,4-b]pyridin-2-amine (CAS: 1160791-13-8)?

6-Bromo[1,3]thiazolo[5,4-b]pyridin-2-amine (CAS: 1160791-13-8) is subject to the...

1160791-13-86-Bromo[1,3]thiazolo...
Compound Q&A

Is (2S,3S)-2-Ammonio-3-(3,4-dihydroxyphenyl)-3-hydroxypropanoate (CAS: 23651-95-8) safe?

(2S,3S)-2-Ammonio-3-(3,4-dihydroxyphenyl)-3-hydroxypropanoate (CAS: 23651-95-8) ...

23651-95-8(2S,3S)-2-Ammonio-3-...
Compound Q&A

What are the physical and chemical properties of 7-bromo-3-methyl-3,4-dihydroquinazolin-4-one (CAS: 1293987-84-4)?

7-Bromo-3-methyl-3,4-dihydroquinazolin-4-one is a solid with a crystalline form....

1293987-84-47-bromo-3-methyl-3,4...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.