Why is the electroanalytical performance of carbon paste electrodes involving an ionic liquid binder higher than paraffinic binders? A simulation investigation

Literature Information

Publication Date 2015-07-15
DOI 10.1039/C5CP02683K
Impact Factor 3.676
Authors

M. H. Ghatee, S. Namvar, A. R. Zolghadr, F. Moosavi


View Original

Abstract

Recently, carbon paste electrodes (CPE) fabricated using an ionic liquid (IL) binder have shown enhanced electroanalytical performance over conventional paraffinic binders. Molecular dynamics (MD) simulations of graphite mixed with ionic liquid and with paraffin binder can unravel the potential atomistic factors responsible for such enhancement. Based on an experimentally optimized binder/graphite mass ratio, which has been reported to be crucial for such a performance, comprehensive simulations (at 323 K) are performed with the ensembles involving an ionic liquid binder (1-butyl-3-methylimidazolium hexafluorophosphate, [C4mim]PF6) and a paraffin binder (n-C20H42) mixed with graphite comprising large-size hexagonal-shaped double graphene plates. Structural analysis indicates both binders form only a monolayer on the graphite surface, covering the surface locally by IL but all-encompassing by paraffin. With charged and uncharged graphite, the IL monolayer tends to cover mainly the graphite center without approaching the edge planes. On the contrary, a monolayer of the paraffin binder covers uniformly the center, near the center, and the edge planes. Cations and anions of the IL form well-defined two dimensional pentagonal matrixes with characteristic high adsorption energy, almost 2.4 times higher than paraffin adsorption. The cation and anion coordination ability of the IL is responsible for such a local distribution. The simulation of these phenomena under experimental conditions unravels strong two-dimensional coordination properties inherent to the ionic liquid when distributed over the graphite surface. This direct MD simulation comparison of the IL properties with an organic liquid counterpart, made for the first time, can be used to explain the high electroanalytical performance (electron transfer) of CPEs involving an IL binder over paraffin binders.

Related Literature

Enzymatic halogenation of the phenolic monoterpenes thymol and carvacrol with chloroperoxidase

Laura Getrey, Thomas Krieg, Frank Hollmann, Jens Schrader, Dirk Holtmann

2013-11-28 Communication

DOI: 10.1039/C3GC42269K

Cr-MIL-101 encapsulated Keggin phosphotungstic acid as active nanomaterial for catalysing the alcoholysis of styrene oxide

Lik H. Wee, Francesca Bonino, Carlo Lamberti, Silvia Bordiga, Johan A. Martens

2013-11-22 Paper

DOI: 10.1039/C3GC41988F

Cobalt-modified molybdenum carbide as an efficient catalyst for chemoselective reduction of aromatic nitro compounds

Zhongkui Zhao, Hongling Yang, Yu Li, Xinwen Guo

2013-11-08 Paper

DOI: 10.1039/C3GC42049C

A mechanochemical strategy for oxidative addition: remarkable yields and stereoselectivity in the halogenation of organometallic Re(i) complexes

José G. Hernández, Neil A. J. Macdonald, Cristina Mottillo, Ian S. Butler, Tomislav Friščić

2013-11-08 Communication

DOI: 10.1039/C3GC42104J

Aerobic oxidation of isosorbide and isomannide employing TEMPO/laccase

Johannes Gross, Katharina Tauber, Michael Fuchs, Nina G. Schmidt, Aashrita Rajagopalan, Kurt Faber, Walter M. F. Fabian, Jan Pfeffer, Thomas Haas, Wolfgang Kroutil

2014-01-30 Communication

DOI: 10.1039/C3GC41855C

Lignin fate and characterization during ionic liquid biomass pretreatment for renewable chemicals and fuels production

Noppadon Sathitsuksanoh, Kevin M. Holtman, Daniel J. Yelle, Trevor Morgan, Vitalie Stavila, Jeffrey Pelton

2013-11-18 Paper

DOI: 10.1039/C3GC42295J

Towards resource efficient chemistry: tandem reactions with renewables

Arno Behr, Andreas J. Vorholt, Karoline A. Ostrowski, Thomas Seidensticker

2013-11-29 Critical Review

DOI: 10.1039/C3GC41960F

Synthesis of a morphology controllable Fe3O4 nanoparticle/hydrogel magnetic nanocomposite inspired by magnetotactic bacteria and its application in H2O2 detection

Yang Gao, Zhao Wei, Fei Li, Zhi Mao Yang, Yong Mei Chen, Miklos Zrinyi, Yoshihito Osada

2013-10-11 Paper

DOI: 10.1039/C3GC41535J

You might also like

Compound Q&A

What precautions should be taken when handling 4-Methyl-6-(trifluoromethyl)quinoline (CAS: 40716-16-3)?

When handling 4-Methyl-6-(trifluoromethyl)quinoline (CAS: 40716-16-3), safety go...

40716-16-34-Methyl-6-(trifluor...
Compound Q&A

What is 4-(3,5-Difluorophenyl)aniline (CAS: 405058-00-6)?

4-(3,5-Difluorophenyl)aniline is an aromatic organic compound with the CAS numbe...

405058-00-64-(3,5-Difluoropheny...
Compound Q&A

How is 5-{[4-(Trifluoromethyl)phenyl]sulfanyl}-1,2,3-thiadiazole-4-carboxylic acid (CAS: 338982-07-3) typically synthesized?

5-{[4-(Trifluoromethyl)phenyl]sulfanyl}-1,2,3-thiadiazole-4-carboxylic acid can ...

338982-07-35-{[4-(Trifluorometh...
Compound Q&A

What is the market or research trend for 4-Benzylaniline hydrochloride (CAS: 6317-57-3)?

The market for 4-Benzylaniline hydrochloride (CAS: 6317-57-3) is steadily growin...

6317-57-34-Benzylaniline hydr...
Compound Q&A

Is [3-(Diethylsulfamoyl)phenyl]boronic acid (CAS: 871329-58-7) safe?

[3-(Diethylsulfamoyl)phenyl]boronic acid is generally considered safe when handl...

871329-58-7[3-(Diethylsulfamoyl...
Compound Q&A

What are the main uses of 3-Bromo-2,5-dimethoxyaniline (CAS: 115929-62-9)?

3-Bromo-2,5-dimethoxyaniline is mainly used in the pharmaceutical and chemical i...

115929-62-93-Bromo-2,5-dimethox...
Compound Q&A

What regulatory guidelines apply to N-Methyl-1-(5-methyl-1H-indol-3-yl)methanamine (CAS: 915922-67-7)?

N-Methyl-1-(5-methyl-1H-indol-3-yl)methanamine (CAS: 915922-67-7) is subject to ...

915922-67-7N-Methyl-1-(5-methyl...
Compound Q&A

What industries use Carbamic acid, N-[(5S)-5,6-diamino-6-oxohexyl]-, 1,1-dimethylethyl ester (CAS: 24828-96-4)?

This compound is primarily used in the pharmaceutical industry for the synthesis...

24828-96-4Carbamic acid, N-[(5...
Compound Q&A

How should 2-Methyl-2-propanyl [(1S,3R)-3-aminocyclohexyl]carbamate (CAS: 1298101-47-9) be stored?

2-Methyl-2-propanyl [(1S,3R)-3-aminocyclohexyl]carbamate (CAS: 1298101-47-9) sho...

1298101-47-92-Methyl-2-propanyl ...
Compound Q&A

What industries use Ethyl 2-bromo-4,4,4-trifluorobutanoate (CAS: 367-33-9)?

Ethyl 2-bromo-4,4,4-trifluorobutanoate (CAS: 367-33-9) is utilized in the pharma...

367-33-9Ethyl 2-bromo-4,4,4-...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.