High throughput volatile fatty acid skin metabolite profiling by thermal desorption secondary electrospray ionisation mass spectrometry

Literature Information

Publication Date 2014-05-16
DOI 10.1039/C4AN00134F
Impact Factor 4.616
Authors

Helen J. Martin, James C. Reynolds, Svetlana Riazanskaia, C. L. Paul Thomas


View Original

Abstract

The non-invasive nature of volatile organic compound (VOC) sampling from skin makes this a priority in the development of new screening and diagnostic assays. Evaluation of recent literature highlights the tension between the analytical utility of ambient ionisation approaches for skin profiling and the practicality of undertaking larger campaigns (higher statistical power), or undertaking research in remote locations. This study describes how VOC may be sampled from skin and recovered from a polydimethylsilicone sampling coupon and analysed by thermal desorption (TD) interfaced to secondary electrospray ionisation (SESI) time-of-flight mass spectrometry (MS) for the high throughput screening of volatile fatty acids (VFAs) from human skin. Analysis times were reduced by 79% compared to gas chromatography-mass spectrometry methods (GC-MS) and limits of detection in the range 300 to 900 pg cm−2 for VFA skin concentrations were obtained. Using body odour as a surrogate model for clinical testing 10 Filipino participants, 5 high and 5 low odour, were sampled in Manilla and the samples returned to the UK and screened by TD-SESI-MS and TD-GC-MS for malodour precursors with greater than >95% agreement between the two analytical techniques. Eight additional VFAs were also identified by both techniques with chains 4 to 15 carbons long being observed. TD-SESI-MS appears to have significant potential for the high throughput targeted screening of volatile biomarkers in human skin.

Related Literature

Exciplex emission from the mixed dimer of naphthalene and 2-cyanonaphthalene in a supersonic jet

Aloke Das, K. K. Mahato, Chayan K. Nandi, Tapas Chakraborty, Shridhar R. Gadre, Nikhil A. Gokhale

2002-04-30 Paper

DOI: 10.1039/B200124C

Microspectroscopy at a moving reduction front in zirconia solid electrolyte

B. Luerßen, J. Janek, S. Günther, M. Kiskinova, R. Imbihl

2002-05-14 Paper

DOI: 10.1039/B109893D

Optical characterization of quasi-monomolecular layers of the nonlinear polymer polyDCHD-HS

Emilia Giorgetti, Giancarlo Margheri, Stefano Sottini, Guido Toci, Maurizio Muniz-Miranda, Laura Moroni, Giovanna Dellepiane

2002-05-17 Paper

DOI: 10.1039/B111492C

A model of the motion of a long DNA chain in a pulsed electric field

V. V. Chasovskikh, L. L. Frumin, S. E. Peltek, G. V. Zilberstein

2002-05-08 Paper

DOI: 10.1039/B110042D

The water dimer in a too tight matrix cage

2002-04-23 Paper

DOI: 10.1039/B111588J

Theoretical analysis of the oxocarbons: The role played by the solvent and counter-ions in the electronic spectrum of the deltate ion

Willian R. Rocha, Wagner B. De Almeida, Hélio F. Dos Santos

2002-05-09 Paper

DOI: 10.1039/B109738E

High pressure, high temperature shock tube studies of ethanepyrolysis and oxidation

Robert S. Tranter, Raghu Sivaramakrishnan, Kenneth Brezinsky, Mark D. Allendorf

2002-03-12 Paper

DOI: 10.1039/B110702J

You might also like

Compound Q&A

How should waste containing (6-Bromo-2-naphthyl)oxy](dimethyl)(2-methyl-2-propanyl)silane be handled?

Waste containing (6-Bromo-2-naphthyl)oxy](dimethyl)(2-methyl-2-propanyl)silane (...

100751-65-3[(6-Bromo-2-naphthyl...
Compound Q&A

How is 7-Fluoro-4-isoquinolinecarboxylic acid (CAS: 1841081-40-0) typically synthesized?

7-Fluoro-4-isoquinolinecarboxylic acid can be synthesized via a multi-step proce...

1841081-40-07-Fluoro-4-isoquinol...
Compound Q&A

What are the physical and chemical properties of 2,3,5,6-Tetrabromothieno[3,2-b]thiophene (CAS: 124638-53-5)?

2,3,5,6-Tetrabromothieno[3,2-b]thiophene is a crystalline compound with a high m...

124638-53-52,3,5,6-Tetrabromoth...
Compound Q&A

Is 1-[4-(Benzylamino)-7,8-dihydro-5H-pyrano[4,3-d]pyrimidin-2-yl]-2-methyl-1H-indole-4-carboxamide (CAS: 1542705-92-9) safe?

1-[4-(Benzylamino)-7,8-dihydro-5H-pyrano[4,3-d]pyrimidin-2-yl]-2-methyl-1H-indol...

1542705-92-91-[4-(Benzylamino)-7...
Compound Q&A

What is the market or research trend for imidazo[5,1-d]-1,2,3,5-tetrazine-8-carboxylic acid, 3,4-dihydro-3-methyl-4-oxo- (CAS: 113942-30-6)?

The market for imidazo[5,1-d]-1,2,3,5-tetrazine-8-carboxylic acid, 3,4-dihydro-3...

113942-30-6Imidazo[5,1-d]-1,2,3...
Compound Q&A

What is 3-(Triisopropylsilyl)propiolaldehyde (CAS: 163271-80-5)?

3-(Triisopropylsilyl)propiolaldehyde is a synthetic organic compound with the CA...

163271-80-53-(Triisopropylsilyl...
Compound Q&A

What regulatory guidelines apply to 6-Nitro-2H-1,4-benzoxazin-3(4H)-one (CAS: 81721-87-1)?

6-Nitro-2H-1,4-benzoxazin-3(4H)-one (CAS: 81721-87-1) is subject to various regu...

81721-87-16-Nitro-2H-1,4-benzo...
Compound Q&A

How should waste containing (3-Fluorophenyl)(4-{[(2-methyl-2-propanyl)oxy]carbonyl}-1-piperazinyl)acetic acid (CAS: 885272-91-3) be handled?

Waste containing (3-Fluorophenyl)(4-{[(2-methyl-2-propanyl)oxy]carbonyl}-1-piper...

885272-91-3(3-Fluorophenyl)(4-{...
Compound Q&A

What are the physical and chemical properties of N,N'-4,4'-Biphenyldiyldiisonicotinamide (CAS: 55119-40-9)?

N,N'-4,4'-Biphenyldiyldiisonicotinamide is a white crystalline solid with a mole...

55119-40-9N,N'-4,4'-Biphenyldi...
Compound Q&A

What industries use 6-Bromo-8-fluoro-2-quinazolinol (CAS: 1036756-15-6)?

6-Bromo-8-fluoro-2-quinazolinol is primarily used in the pharmaceutical industry...

1036756-15-66-Bromo-8-fluoro-2-q...

Source Journal

Analyst

Analyst
CiteScore: 7.8
Self-citation Rate: 5.6%
Articles per Year: 653

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.