Multistep synthesis of amides from alcohols and amines in continuous flow microreactor systems using oxygen and ureahydrogen peroxide as oxidants
Literature Information
Xiaoying Liu, Klavs F. Jensen
By integrating a heterogeneous oxidation step, gas–liquid separation, and an oxidative amidation reaction to form a continuous system, a multistep synthetic protocol has been demonstrated to produce amides under mild conditions using alcohols and amines as the starting materials. The use of inexpensive oxygen and urea hydrogen peroxide as the only oxidants affords an economical and adaptable synthetic route for amides.
Related Literature
The synthesis of unsymmetric diamides through Rh-catalyzed selective C–H bond activation of amides with isocyanates
Xiaoli Yu, Duo-Sheng Wang, Zhaojun Xu, Bobin Yang, Dawei Wang
DOI: 10.1039/C6QO00793G
Additive-free regio- and diastereoselective construction of fully-substituted isoxazolidines employing diazo compounds
Ekta Gupta, Mohd Khalid Zaheer, Ruchir Kant
DOI: 10.1039/C8QO01421C
Synthesis and structure revision of symplocin A
Lu-Ping Shao, Chang-Mei Si, Zhuo-Ya Mao, Wen Zhou, Tadeusz F. Molinski, Bang-Guo Wei, Guo-Qiang Lin
DOI: 10.1039/C7QO00052A
Synthesis of homoazafullerene [C59N(CH2)]R and azahomoazafullerene [C59N(NH)]R
Dan Xu, Yanbang Li, Ning Lou
DOI: 10.1039/C7QO00098G
Synthesis of a figure-eight azahelicene dimer with high emission and CPL properties
Ayako Ushiyama, Satoru Hiroto, Junpei Yuasa, Tsuyoshi Kawai, Hiroshi Shinokubo
DOI: 10.1039/C6QO00629A
The influence of the central acceptor unit on the optoelectronic properties and photovoltaic performance of A–D–A–D–A-type co-oligomers
Ibrahim Ata, Duško Popovic, Mika Lindén, Amaresh Mishra, Peter Bäuerle
DOI: 10.1039/C7QO00043J
Efficient synthesis of multiply substituted butenolides from keto acids and terminal alkynes promoted by combined acids
Wenbin Mao
DOI: 10.1039/C6QO00820H
Ring-opening selenation of cyclobutanols: synthesis of γ-selenylated alkyl ketones through C–C bond cleavage
Mingyang Wang, Zhen Wu
DOI: 10.1039/C6QO00744A
Visible light photocatalytic acyldifluoroalkylation of unactivated alkenes for the direct synthesis of gem-difluorinated ketones
Yulu Zhou, Zhimin Xiong, Jiayan Qiu, Lichun Kong, Gangguo Zhu
DOI: 10.1039/C9QO00136K
Quasi-planar diazadithio and diazodiseleno[8]circulenes: synthesis, structures and properties
Xiaodong Xiong, Chun-Lin Deng, Zhiming Li
DOI: 10.1039/C6QO00662K
You might also like
What precautions should be taken when handling 4-Methyl-6-(trifluoromethyl)quinoline (CAS: 40716-16-3)?
When handling 4-Methyl-6-(trifluoromethyl)quinoline (CAS: 40716-16-3), safety go...
What is 4-(3,5-Difluorophenyl)aniline (CAS: 405058-00-6)?
4-(3,5-Difluorophenyl)aniline is an aromatic organic compound with the CAS numbe...
How is 5-{[4-(Trifluoromethyl)phenyl]sulfanyl}-1,2,3-thiadiazole-4-carboxylic acid (CAS: 338982-07-3) typically synthesized?
5-{[4-(Trifluoromethyl)phenyl]sulfanyl}-1,2,3-thiadiazole-4-carboxylic acid can ...
What is the market or research trend for 4-Benzylaniline hydrochloride (CAS: 6317-57-3)?
The market for 4-Benzylaniline hydrochloride (CAS: 6317-57-3) is steadily growin...
Is [3-(Diethylsulfamoyl)phenyl]boronic acid (CAS: 871329-58-7) safe?
[3-(Diethylsulfamoyl)phenyl]boronic acid is generally considered safe when handl...
What are the main uses of 3-Bromo-2,5-dimethoxyaniline (CAS: 115929-62-9)?
3-Bromo-2,5-dimethoxyaniline is mainly used in the pharmaceutical and chemical i...
What regulatory guidelines apply to N-Methyl-1-(5-methyl-1H-indol-3-yl)methanamine (CAS: 915922-67-7)?
N-Methyl-1-(5-methyl-1H-indol-3-yl)methanamine (CAS: 915922-67-7) is subject to ...
What industries use Carbamic acid, N-[(5S)-5,6-diamino-6-oxohexyl]-, 1,1-dimethylethyl ester (CAS: 24828-96-4)?
This compound is primarily used in the pharmaceutical industry for the synthesis...
How should 2-Methyl-2-propanyl [(1S,3R)-3-aminocyclohexyl]carbamate (CAS: 1298101-47-9) be stored?
2-Methyl-2-propanyl [(1S,3R)-3-aminocyclohexyl]carbamate (CAS: 1298101-47-9) sho...
What industries use Ethyl 2-bromo-4,4,4-trifluorobutanoate (CAS: 367-33-9)?
Ethyl 2-bromo-4,4,4-trifluorobutanoate (CAS: 367-33-9) is utilized in the pharma...
Source Journal
Green Chemistry

Green Chemistry provides a unique forum for the publication of innovative research on the development of alternative green and sustainable technologies. The scope of Green Chemistry is based on, but not limited to, the definition proposed by Anastas and Warner (Green Chemistry: Theory and Practice, P T Anastas and J C Warner, Oxford University Press, Oxford, 1998). Green chemistry is the utilisation of a set of principles that reduces or eliminates the use or generation of hazardous substances in the design, manufacture and application of chemical products. Green Chemistry is at the frontiers of this continuously-evolving interdisciplinary science and publishes research that attempts to reduce the environmental impact of the chemical enterprise by developing a technology base that is inherently non-toxic to living things and the environment. Submissions on all aspects of research relating to the endeavour are welcome. The journal publishes original and significant cutting-edge research that is likely to be of wide general appeal. To be published, work must present a significant advance in green chemistry. Papers must contain a comparison with existing methods and demonstrate advantages over those methods before publication can be considered. For more information please see this Editorial. Coverage includes the following, but is not limited to: Design (e.g. biomimicry, design for degradation/recycling/reduced toxicity…) Reagents & Feedstocks (e.g. renewables, CO2, solvents, auxiliary agents, waste utilization…) Synthesis (e.g. organic, inorganic, synthetic biology…) Catalysis (e.g. homogeneous, heterogeneous, enzyme, whole cell…) Process (e.g. process design, intensification, separations, recycling, efficiency…) Energy (e.g. renewable energy, fuels, photovoltaics, fuel cells, energy storage, energy carriers…) Applications (e.g. electronics, dyes, consumer products, coatings, pharmaceuticals, preservatives, building materials, chemicals for industry/agriculture/mining…) Impact (e.g. safety, metrics, LCA, sustainability, (eco)toxicology…) Green chemistry is, by definition, a continuously-evolving frontier. Therefore, the inclusion of a particular material or technology does not, of itself, guarantee that a paper is suitable for the journal. To be suitable, the novel advance should have the potential for reduced environmental impact relative to the state of the art. Green Chemistry does not normally deal with research associated with 'end-of-pipe' or remediation issues.











![Imidazo[1,2-c]pyrimidine structure Imidazo[1,2-c]pyrimidine structure](https://static.chemtradehub.com/structs/274/274-78-2-8b4c.webp)
![6,7-Dihydro-5H-pyrrolo[1,2-a]imidazole-6-carboxylic acid structure 6,7-Dihydro-5H-pyrrolo[1,2-a]imidazole-6-carboxylic acid structure](https://static.chemtradehub.com/structs/136/1369160-12-2-6524.webp)

