Pressure dependent photolysis quantum yields for CH3C(O)CH3 at 300 and 308 nm and at 298 and 228 K

Literature Information

Publication Date 2013-05-16
DOI 10.1039/C3CP50291K
Impact Factor 3.676
Authors

V. G. Khamaganov, J. N. Crowley


View Original

Abstract

The quantum yield of formation of CH3 and CH3CO in the pulsed laser photo-excitation of acetone at 300 and 308 nm was investigated at several pressures (60 to 740 Torr) and at either 298 or 228 K. The organic radicals generated were monitored indirectly following conversion (by reaction with Br2) to Br atoms, which were detected by resonance fluorescence. The photolysis of Cl2 in back-to-back experiments at the same wavelength and under identical experimental conditions served as chemical actinometer. The pressure and temperature dependent quantum yields obtained with this method are in good agreement with previous literature values and are reproduced using the parameterisation developed by Blitz et al. The Br formation kinetics deviated from that expected from reactions of CH3 and CH3CO alone and Br atoms were still observed at high yield even when the quantum yield of formation of CH3 and CH3CO was low. This is explained by the reactive quenching of thermalized triplet acetone (T1) by Br2. High yields of T1 (>80%) at the highest pressure in this study indicate that any dissociation from the first excited singlet state (S1) occurs in competition with intersystem crossing, and that physical quenching of S1 to the electronic ground (S0) is not a major process at these wavelengths. The rate coefficient for reaction of T1 with Br2 was found to be ∼3 × 10−10 cm3 molecule−1 s−1, independent of pressure or temperature.

Related Literature

The primary photo-dissociation dynamics of carboxylate anions in aqueous solution: decarboxylation

Marlene Møller Madsen, Frank Jensen, Svend J. Knak Jensen, Jan Thøgersen

2019-03-18 Paper

DOI: 10.1039/C8CP07621A

Size-controllable and uniform gold bumpy nanocubes for single-particle-level surface-enhanced Raman scattering sensitivity

Hyejin Chang, Yoon Young Lee, Hye Eun Lee, Hyo-Yong Ahn, Eunbyeol Ko, Ki Tae Nam

2019-03-15 Paper

DOI: 10.1039/C9CP00138G

Tetrel bonds and conformational equilibria in the formamide–CO2 complex: a rotational study

Shuang Gao, Daniel A. Obenchain, Juncheng Lei, Gang Feng, Sven Herbers, Qian Gou, Jens-Uwe Grabow

2019-02-27 Paper

DOI: 10.1039/C9CP00055K

The correlation between electrical conductivity and second-order Raman modes of laser-reduced graphene oxide

Bing Ma, Raul D. Rodriguez, Alexey Ruban, Sergey Pavlov, Evgeniya Sheremet

2019-04-25 Paper

DOI: 10.1039/C9CP00093C

Kasha's rule: a reappraisal

Juan Carlos del Valle, Javier Catalán

2019-04-23 Paper

DOI: 10.1039/C9CP00739C

Front cover

Cover

DOI: 10.1039/C9CP90130B

Thermodynamic and dynamical properties of the hard sphere system revisited by molecular dynamics simulation

Sławomir Pieprzyk, Marcus N. Bannerman, Arkadiusz C. Brańka, Maciej Chudak, David M. Heyes

2019-03-19 Paper

DOI: 10.1039/C9CP00903E

Ionic conductivity of deep eutectic solvents: the role of orientational dynamics and glassy freezing

Daniel Reuter, Catharina Binder, Peter Lunkenheimer, Alois Loidl

2019-02-26 Paper

DOI: 10.1039/C9CP00742C

Front cover

Cover

DOI: 10.1039/C9CP90094B

Strain-induced indirect-to-direct bandgap transition in an np-type LaAlO3/SrTiO3(110) superlattice

L. Wang, W. Pan, W. X. Hu, D. Y. Sun

2019-03-08 Paper

DOI: 10.1039/C8CP07761D

You might also like

Compound Q&A

How is Ethyl 4-chlorothieno[2,3-b]pyridine-5-carboxylate (CAS: 59713-58-5) typically synthesized?

Ethyl 4-chlorothieno[2,3-b]pyridine-5-carboxylate (CAS: 59713-58-5) can be synth...

59713-58-5Ethyl 4-chlorothieno...
Compound Q&A

What regulatory guidelines apply to 5-Methyl-1H-indole-3-carbaldehyde (CAS: 52562-50-2)?

5-Methyl-1H-indole-3-carbaldehyde (CAS: 52562-50-2) is subject to various regula...

52562-50-25-Methyl-1H-indole-3...
Compound Q&A

What are the physical and chemical properties of (1,3-Dimethyl-2,4-dioxo-1,2,3,4-tetrahydro-5-pyrimidinyl)boronic acid (CAS: 223418-73-3)?

(1,3-Dimethyl-2,4-dioxo-1,2,3,4-tetrahydro-5-pyrimidinyl)boronic acid is a white...

223418-73-3(1,3-Dimethyl-2,4-di...
Compound Q&A

How should waste containing Sulfocostunolide A (CAS: 1016983-51-9) be handled?

Waste containing Sulfocostunolide A (CAS: 1016983-51-9) should be handled with c...

1016983-51-9Sulfocostunolide A
Compound Q&A

What precautions should be taken when handling Murraxocin (CAS: 88478-44-8)?

When handling Murraxocin (CAS: 88478-44-8), ensure proper personal protective eq...

88478-44-8Murraxocin
Compound Q&A

What are the physical and chemical properties of Formvar (CAS: 63148-64-1)?

Formvar (CAS: 63148-64-1) is an alkyd resin characterized by a high molecular we...

63148-64-1Formvar(R)
Compound Q&A

Is (S)-4-benzyl-2-((benzyloxy)methyl)morpholine (CAS: 205242-66-6) safe?

(S)-4-benzyl-2-((benzyloxy)methyl)morpholine is generally safe when handled with...

205242-66-6(S)-4-benzyl-2-((ben...
Compound Q&A

What industries use Methyl 1-(5-bromo-2-pyrimidinyl)cyclopropanecarboxylate (CAS: 1447607-69-3)?

Methyl 1-(5-bromo-2-pyrimidinyl)cyclopropanecarboxylate (CAS: 1447607-69-3) is p...

1447607-69-3Methyl 1-(5-bromo-2-...
Compound Q&A

Is 2-Methyl-1-phenyl-1-propanamine hydrochloride (CAS: 24290-47-9) safe?

2-Methyl-1-phenyl-1-propanamine hydrochloride (CAS: 24290-47-9) is generally con...

24290-47-92-Methyl-1-phenyl-1-...
Compound Q&A

How is 3-(4-Bromophenyl)-2-methylpropanoic acid (CAS: 66735-01-1) typically synthesized?

3-(4-Bromophenyl)-2-methylpropanoic acid is synthesized through a multi-step pro...

66735-01-13-(4-Bromophenyl)-2-...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.