Thermodynamic and dynamical properties of the hard sphere system revisited by molecular dynamics simulation

Literature Information

Publication Date 2019-03-19
DOI 10.1039/C9CP00903E
Impact Factor 3.676
Authors

Sławomir Pieprzyk, Marcus N. Bannerman, Arkadiusz C. Brańka, Maciej Chudak, David M. Heyes


View Original

Abstract

Revised thermodynamic and dynamical properties of the hard sphere (HS) system are obtained from extensive molecular dynamics calculations carried out with large system sizes (number of particles, N) and long times. Accurate formulas for the compressibility factor of the HS solid and fluid branches are proposed, which represent the metastable region and take into account its divergence at close packing. Some basic second-order thermodynamic properties are obtained and a maximum in some of their derivatives in the metastable fluid region is found. The thermodynamic parameters associated with the melting–freezing transition have been determined to four digit accuracy, which generates accurate new values for the coexistence properties of the HS system. For the self-diffusion coefficient, D, it is shown that relatively large systems (N > 104) are required to achieve an accurate linear extrapolation of D to the infinite size limit with a D vs. N−1/3 plot. Moreover, it is found that there is a density dependence of the value of the slope in the linear regime. The density dependent correction becomes practically insignificant at higher densities and the hydrodynamic formula found in the literature is still accurate. However, with decreasing density the density dependence of the size correction cannot be neglected, which indicates that other sources of N-dependence, apart from those derived on purely hydrodynamic grounds, may also be important (and as yet unaccounted for). A detailed analytic representation of the density dependence of the HS self-diffusion coefficient and the HS viscosity, η, is given. It is shown that the HS viscosity near freezing and in the metastable region can be described well by the Krieger–Dougherty equation. Both D and η start to scale at high densities and in the metastable region in such a way that Dηp = const, where p ≃ 0.97, and D → 0 and η → ∞ at a packing fraction of 0.58, which coincides with some previous predictions of the HS glass transition density.

Related Literature

Contents list

Front/Back Matter

DOI: 10.1039/C1CC90166D

Thermal annealing reduces geminate recombination in TQ1:N2200 all-polymer solar cells

Safakath Karuthedath, Armantas Melianas, Zhipeng Kan, Vytenis Pranculis, Markus Wohlfahrt, Jafar I. Khan, Julien Gorenflot, Yuxin Xia, Olle Inganäs, Vidmantas Gulbinas, Martijn Kemerink, Frédéric Laquai

2018-03-27 Paper

DOI: 10.1039/C8TA01692E

Smartphone-based optical analysis systems

Sarah Di Nonno, Roland Ulber

2021-03-31 Critical Review

DOI: 10.1039/D1AN00025J

Multilayer structured AgNW/WPU-MXene fiber strain sensors with ultrahigh sensitivity and a wide operating range for wearable monitoring and healthcare

Jun-Hong Pu, Xing Zhao, Xiang-Jun Zha, Lu Bai, Kai Ke, Rui-Ying Bao, Zheng-Ying Liu, Ming-Bo Yang, Wei Yang

2019-06-03 Paper

DOI: 10.1039/C9TA04352G

The effects of TiO2 nanotube arrays with different diameters on macrophage/endothelial cell response and ex vivo hemocompatibility

Zeyu Du, Rui Hao, Ruiqiang Hang, Xiaohong Yao, Nan Huang, Bin Tang

2018-08-31 Paper

DOI: 10.1039/C8TB01675E

In situ coating of a continuous mesoporous bimetallic PtRu film on Ni foam: a nanoarchitectured self-standing all-metal mesoporous electrode

Hongjing Wang, Hongjie Yu, Shuli Yin, You Xu, Xiaonian Li, Hairong Xue, Liang Wang

2018-06-02 Paper

DOI: 10.1039/C8TA03413C

Syntheses of Au–Cu-rich AuAg(AgCl)Cu alloy and Ag–Cu-rich AuAgCu@Cu core–shell and AuAgCu alloy nanoparticles using a polyol method

Mika Matsunaga, Toshitaka Ishizaki, Takamasa Nonaka

2012-03-15 Paper

DOI: 10.1039/C2CE06119H

Photoresponsive smart template for reversible cell micropatterning

Yu-Hui Gong, Juan Yang, Feng-Yi Cao, Jing Zhang, Han Cheng, Ren-Xi Zhuo, Xian-Zheng Zhang

2013-02-26 Communication

DOI: 10.1039/C3TB20073F

A homogeneous digital biosensor for circulating tumor DNA by the enumeration of a dual-color quantum dot complex

Xiaojun Liu, Zhangjian Wu, Xinyi Lin, Wei Bu, Lei Qin, Hongwei Gai

2021-03-18 Paper

DOI: 10.1039/D1AN00299F

You might also like

Compound Q&A

How is Ethyl 4-chlorothieno[2,3-b]pyridine-5-carboxylate (CAS: 59713-58-5) typically synthesized?

Ethyl 4-chlorothieno[2,3-b]pyridine-5-carboxylate (CAS: 59713-58-5) can be synth...

59713-58-5Ethyl 4-chlorothieno...
Compound Q&A

What regulatory guidelines apply to 5-Methyl-1H-indole-3-carbaldehyde (CAS: 52562-50-2)?

5-Methyl-1H-indole-3-carbaldehyde (CAS: 52562-50-2) is subject to various regula...

52562-50-25-Methyl-1H-indole-3...
Compound Q&A

What are the physical and chemical properties of (1,3-Dimethyl-2,4-dioxo-1,2,3,4-tetrahydro-5-pyrimidinyl)boronic acid (CAS: 223418-73-3)?

(1,3-Dimethyl-2,4-dioxo-1,2,3,4-tetrahydro-5-pyrimidinyl)boronic acid is a white...

223418-73-3(1,3-Dimethyl-2,4-di...
Compound Q&A

How should waste containing Sulfocostunolide A (CAS: 1016983-51-9) be handled?

Waste containing Sulfocostunolide A (CAS: 1016983-51-9) should be handled with c...

1016983-51-9Sulfocostunolide A
Compound Q&A

What precautions should be taken when handling Murraxocin (CAS: 88478-44-8)?

When handling Murraxocin (CAS: 88478-44-8), ensure proper personal protective eq...

88478-44-8Murraxocin
Compound Q&A

What are the physical and chemical properties of Formvar (CAS: 63148-64-1)?

Formvar (CAS: 63148-64-1) is an alkyd resin characterized by a high molecular we...

63148-64-1Formvar(R)
Compound Q&A

Is (S)-4-benzyl-2-((benzyloxy)methyl)morpholine (CAS: 205242-66-6) safe?

(S)-4-benzyl-2-((benzyloxy)methyl)morpholine is generally safe when handled with...

205242-66-6(S)-4-benzyl-2-((ben...
Compound Q&A

What industries use Methyl 1-(5-bromo-2-pyrimidinyl)cyclopropanecarboxylate (CAS: 1447607-69-3)?

Methyl 1-(5-bromo-2-pyrimidinyl)cyclopropanecarboxylate (CAS: 1447607-69-3) is p...

1447607-69-3Methyl 1-(5-bromo-2-...
Compound Q&A

Is 2-Methyl-1-phenyl-1-propanamine hydrochloride (CAS: 24290-47-9) safe?

2-Methyl-1-phenyl-1-propanamine hydrochloride (CAS: 24290-47-9) is generally con...

24290-47-92-Methyl-1-phenyl-1-...
Compound Q&A

How is 3-(4-Bromophenyl)-2-methylpropanoic acid (CAS: 66735-01-1) typically synthesized?

3-(4-Bromophenyl)-2-methylpropanoic acid is synthesized through a multi-step pro...

66735-01-13-(4-Bromophenyl)-2-...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.