Selective epichlorohydrin-sensing performance of Ag nanoparticles decorated porous SnO2 architectures

Literature Information

Publication Date 2013-10-08
DOI 10.1039/C3CE41478G
Impact Factor 3.545
Authors

Haiyan Song, Shishu Zhang, Junyan Zhang, Wenya Bao, Quanqin Zhao


View Original

Abstract

Epichlorohydrin (ECH) is mainly an industrial raw material, while it is toxic and dangerous for human health, so finding a simple and effective method for detecting ECH gas is challenging work. Porous SnO2 structures are successfully obtained through a hydrothermal method using SnCl4·5H2O as the tin source and water as the solvent. Ag nanoparticle (NPs) decorated porous SnO2 structures have also been prepared by the impregnation method. The morphology and structure of the as-prepared products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and the nitrogen adsorption–desorption technique. The as-synthesized nanostructures, with diameters ranging from 4–5 μm, are composed of porous nanosheets with an average thickness of 60 nm. The gas sensing properties of the Ag NPs decorated porous SnO2 structures for ECH gas were investigated in detail, and the results showed that the 10% Ag NPs decorated porous SnO2 structures gas sensor was the optimum sensor, demonstrating a response (S = 50) for 100 ppm of ECH gas, while the working temperature was decreased by about 180 °C. In addition, it showed a low detection level (0.5 ppm) for ECH gas, good reproducibility and repeatability, and long-term stability, implying a promising application in detecting ECH gas.

Related Literature

The aqueous phase behavior of polyion–surfactant ion complex salts mixed with nonionic surfactants‡

John Janiak, Lennart Piculell, Gerd Olofsson, Karin Schillén

2010-10-11 Paper

DOI: 10.1039/C0CP01031F

Microenvironment-switchable singlet oxygen generation by axially-coordinated hydrophilic ruthenium phthalocyanine dendrimers

Uwe Hahn, Francesca Setaro, Xavier Ragàs, Angus Gray-Weale, Santi Nonell, Tomas Torres

2010-12-21 Paper

DOI: 10.1039/C0CP01015D

Determining excitation temperature of fragmented C60via momentum distributions of fragments

D. B. Qian, X. Ma, Z. Chen, X. L. Zhu, H. P. Liu

2011-01-24 Paper

DOI: 10.1039/C0CP00773K

The role of calcium in membrane condensation and spontaneous curvature variations in model lipidic systems

Anan Yaghmur, Barbara Sartori, Michael Rappolt

2010-11-03 Paper

DOI: 10.1039/C0CP01036G

Mechanistic differences between methanol and dimethyl ethercarbonylation in side pockets and large channels of mordenite

Mercedes Boronat, Cristina Martínez, Avelino Corma

2011-01-19 Paper

DOI: 10.1039/C0CP01996H

Free energy evaluation of the p53-Mdm2 complex from unbinding work measured by dynamic force spectroscopy

Anna Rita Bizzarri, Salvatore Cannistraro

2010-12-10 Paper

DOI: 10.1039/C0CP01474E

Effect of nucleobase sequence on the proton-transfer reaction and stability of the guanine–cytosine base pair radical anion

Hsing-Yin Chen, Shu-Wen Yeh, Sodio C. N. Hsu, Chai-Lin Kao, Teng-Yuan Dong

2010-12-09 Paper

DOI: 10.1039/C0CP01419B

Capture and dissociation in the complex-forming CH+H2 → CH2+H, CH+H2 reactions

Miguel González, Amaia Saracibar, Ernesto Garcia

2011-01-06 Paper

DOI: 10.1039/C0CP01188F

You might also like

Compound Q&A

What are the main uses of 1H-Indazole-6-carbonitrile (CAS: 141290-59-7)?

1H-Indazole-6-carbonitrile finds applications in pharmaceuticals, where it serve...

141290-59-71H-Indazole-6-carbon...
Compound Q&A

How should waste containing Dioctyl (2E)-2-butenedioate (CAS: 2997-85-5) be handled?

Waste containing Dioctyl (2E)-2-butenedioate (CAS: 2997-85-5) should be collecte...

2997-85-5Dioctyl (2E)-2-buten...
Compound Q&A

What industries use Sodium [(1,2-benzoxazol-3-ylmethyl)sulfonyl]azanide (CAS: 68291-98-5)?

Sodium [(1,2-benzoxazol-3-ylmethyl)sulfonyl]azanide is primarily used in pharmac...

68291-98-5Sodium [(1,2-benzoxa...
Compound Q&A

Are there alternatives to Dimethyl 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-2,6-pyridinedicarboxylate (CAS: 741709-66-0) in synthesis?

Dimethyl 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-2,6-pyridinedicarboxyla...

741709-66-0Dimethyl 4-(4,4,5,5-...
Compound Q&A

How should waste containing 2-Fluoro-6-hydrazinopyridine (CAS: 80714-39-2) be handled?

Waste containing 2-Fluoro-6-hydrazinopyridine (CAS: 80714-39-2) should be manage...

80714-39-22-Fluoro-6-hydrazino...
Compound Q&A

What is 6-Formyl-2-pyridinecarboxylic acid (CAS: 499214-11-8)?

6-Formyl-2-pyridinecarboxylic acid is an organic compound with the molecular for...

499214-11-86-Formyl-2-pyridinec...
900874-91-13-(3,4-dimethoxyphen...
Compound Q&A

How is 9H-Tribenzo[b,d,f]azepine (CAS: 29875-73-8) typically synthesized?

9H-Tribenzo[b,d,f]azepine is typically synthesized via a multi-step process invo...

29875-73-89H-Tribenzo[b,d,f]az...
Compound Q&A

How is 1-Cyclopropyl-7-ethoxy-6-fluoro-8-methoxy-4-oxo-1,4-dihydro-3-quinolinecarboxylic acid (CAS: 1797982-51-4) typically synthesized?

1-Cyclopropyl-7-ethoxy-6-fluoro-8-methoxy-4-oxo-1,4-dihydro-3-quinolinecarboxyli...

1797982-51-41-Cyclopropyl-7-etho...
Compound Q&A

How should waste containing Methyl 3-oxo-1,2,3,4-tetrahydro-6-quinoxalinecarboxylate (CAS: 671820-52-3) be handled?

Waste containing Methyl 3-oxo-1,2,3,4-tetrahydro-6-quinoxalinecarboxylate (CAS: ...

671820-52-3Methyl 3-oxo-1,2,3,4...

Source Journal

CrystEngComm

CrystEngComm
CiteScore: 5.5
Self-citation Rate: 7.7%
Articles per Year: 643

CrystEngComm is the forum for the design and understanding of crystalline materials. We welcome studies on the investigation of molecular behaviour within crystals, control of nucleation and crystal growth, engineering of crystal structures, and construction of crystalline materials with tuneable properties and functions. We publish hypothesis-driven research into… how crystal design affects thermodynamics, phase transitional behaviours, polymorphism, morphology control, solid state reactivity (crystal-crystal solution-crystal, and gas-crystal reactions), optoelectronics, ferroelectric materials, non-linear optics, molecular and bulk magnetism, conductivity and quantum computing, catalysis, absorption and desorption, and mechanical properties. Using Techniques and methods including… Single crystal and powder X-ray, electron, and neutron diffraction, solid-state spectroscopy, spectrometry, and microscopy, modelling and data mining, and empirical, semi-empirical and ab-initio theoretical evaluations. On crystalline and solid-state materials. We particularly welcome work on MOFs, coordination polymers, nanocrystals, host-guest and multi-component molecular materials. We also accept work on peptides and liquid crystals. All papers should involve the use or development of a design or optimisation strategy. Routine structural reports or crystal morphology descriptions, even when combined with an analysis of properties or potential applications, are generally considered to be outside the scope of the journal and are unlikely to be accepted.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.