Heterogeneous oxidation of a phosphocholine on synthetic sea salt by ozone at room temperature
Literature Information
Christopher W. Dilbeck, Barbara J. Finlayson-Pitts
The ozonolysis of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) adsorbed on salt mixtures as models for sea-salt particles was studied in real time using diffuse reflection infrared Fourier transform spectrometry (DRIFTS) at room temperature with and without added water vapor. The salt substrates were a mixture of MgCl2·6H2O with NaCl or a commercially available synthetic sea salt. Ozone concentrations ranged from (0.25 to 3.9) × 1013 molecules cm−3 (0.1–1.6 ppm). The major products identified by FTIR and confirmed using matrix-assisted laser desorption/ionization (MALDI) mass spectrometry were the secondary ozonide (SOZ) and a phospholipid aldehyde and carboxylic acid formed by scission of the double bond. The reaction probabilities for the two substrates were similar, γ = (6–7) × 10−7, with an estimated overall uncertainty of a factor of two. The presence of water vapor decreased the yield of SOZ relative to the products formed by CC scission, but also increased the availability of the double bond for reaction, particularly on the less hygroscopic commercial sea-salt substrate. Thus, water not only affects the mechanisms and products, but also the structure of the phospholipid on the salt in a manner that affects its reactivity. The results of these studies suggest that the reactivity and products of oxidation of unsaturated phospholipids on sea-salt particles in air will be very sensitive to the nature and phase of the substrate, the amount of water present, and whether there is phase separation between the organics and the inorganic salt mixture.
Recommended Journals

Russian Chemical Reviews

Journal of Physics and Chemistry of Solids

Kinetics and Catalysis

Fibre Chemistry

Israel Journal of Chemistry

Helvetica Chimica Acta

Proceedings of the National Academy of Sciences of the United States of America

Molecular Pharmacology

Nature

European Journal of Wood and Wood Products
Related Literature
Nano-in-nano enteric protein delivery system: coaxial Eudragit® L100-55 fibers containing poly(N-vinylcaprolactam) nanogels
Ana Sonzogni, Guadalupe Rivero, Verónica Gonzalez, Gustavo Abraham, Roque Minari
DOI: 10.1039/D3BM01422C
Size-dependent therapeutic efficiency of 223Ra-labeled calcium carbonate carriers for internal radionuclide therapy of breast cancer
Arina S. Ivkina, Mikhail V. Zyuzin, Sergei A. Shipilovskikh
DOI: 10.1039/D3BM01651J
Antiepileptic drug concentration detection based on Raman spectroscopy and an improved snake optimization-convolutional neural network algorithm
Xinghu Fu, Xiqing Cao, Zizhen Fu, Zhexu Huang, Wa Jin, Guangwei Fu, Weihong Bi
DOI: 10.1039/D3AY01631E
Method development for forensic oil identification by direct analysis in real time time-of-flight mass spectrometry
Krishnaja Tikkisetty, Taylor Filewood, Jeffrey Yan, Honoria Kwok, Pamela Brunswick, Robert Cody, Dayue Shang
DOI: 10.1039/D3AY01282D
Multifunctional MXene-doped photothermal microneedles for drug-resistant bacteria-infected wound healing
Yongjin Zhong, Yancheng Lai, Zeru Feng, Si Huang, Yu Fu, Lirong Huang, Keng-fu Lan, Anchun Mo
DOI: 10.1039/D3BM01676E
Milk exosomes anchored with hydrophilic and zwitterionic motifs enhance mucus permeability for applications in oral gene delivery
Chenzhen Zhang, Hengli Zhang, Héctor A. Millán Cotto, Timothy L. Boyer, Matthew R. Warren, Chia-Ming Wang, Joshua Luchan, Pradeep K. Dhal, Rebecca L. Carrier, Ambika G. Bajpayee
DOI: 10.1039/D3BM01089A
Rapamycin-based inhaled therapy for potential treatment of COPD-related inflammation: production and characterization of aerosolizable nano into micro (NiM) particles
Emanuela Fabiola Craparo, Marta Cabibbo, Cinzia Scialabba, Luca Casula, Francesco Lai
DOI: 10.1039/D3BM01210G
Expression of concern: High cytotoxic activity of ZnO@leucovorin nanocomposite based materials against an MCF-7 cell model
Shereen Magdy Bazid, Shimaa Nabih, Md Ariful Ahsan
DOI: 10.1039/D3AY90141F
A dually emissive MPA-CdTe QDs@N, S-GQD nanosensor for sensitive and selective detection of 4-nitrophenol using two turn-off signals
Ali Nematollahzadeh
DOI: 10.1039/D3AY01160G
UPLC-MS/MS method for quantitative determination of the advanced glycation endproducts Nε-(carboxymethyl)lysine and Nε-(carboxyethyl)lysine
DOI: 10.1039/D3AY01817B
You might also like
What regulatory guidelines apply to 6-Bromo-2-methylimidazo[1,2-a]pyrimidine (CAS: 1111638-05-1)?
6-Bromo-2-methylimidazo[1,2-a]pyrimidine (CAS: 1111638-05-1) falls under various...
Are there alternatives to 1-Pyrrolidineethanol, β-methyl-α-phenyl-, (αS,βR) (CAS: 123620-80-4) in synthesis?
While there are no direct alternatives, similar compounds like 1-Pyrrolidineetha...
Is 4-Methyl-2,6-bis(2-methyl-2-propanyl)phenyl methylcarbamate (CAS: 1918-11-2) safe?
4-Methyl-2,6-bis(2-methyl-2-propanyl)phenyl methylcarbamate (CAS: 1918-11-2) is ...
How should 2-(3-Bromo-4-fluorophenyl)-1,3-dioxolane (CAS: 77771-04-1) be stored?
2-(3-Bromo-4-fluorophenyl)-1,3-dioxolane (CAS: 77771-04-1) should be stored in a...
What are the physical and chemical properties of 4,5,6,7-Tetrahydro-1H-indazole hydrochloride (CAS: 18161-11-0)?
4,5,6,7-Tetrahydro-1H-indazole hydrochloride is a white crystalline solid with a...
What is (2R)-1-Methoxy-3-phenyl-2-propanamine (CAS: 59919-07-2)?
(2R)-1-Methoxy-3-phenyl-2-propanamine is a chiral organic compound with the CAS ...
What industries use Ethyl 1-(1-phenylethyl)-1H-imidazole-5-carboxylate (CAS: 56649-47-9)?
Ethyl 1-(1-phenylethyl)-1H-imidazole-5-carboxylate is used in various industries...
What regulatory guidelines apply to 4-[(1E,3S)-1-(4-Hydroxyphenyl)-1,4-pentadien-3-yl]phenol (CAS: 17676-24-3)?
4-[(1E,3S)-1-(4-Hydroxyphenyl)-1,4-pentadien-3-yl]phenol (CAS: 17676-24-3) falls...
What industries use (S)-3-Amino-5-phenylpentanoic acid hydrochloride (CAS: 331846-97-0)?
(S)-3-Amino-5-phenylpentanoic acid hydrochloride is primarily used in the pharma...
How is 7-methoxy-1-benzothiophene-2-carboxylic acid (CAS: 88791-07-5) typically synthesized?
7-Methoxy-1-benzothiophene-2-carboxylic acid is typically synthesized by reactin...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.
![Benzeneacetic acid, 2-[(2,6-dichlorophenyl)amino]-, compd. with 1-pyrrolidineethanol (1:1) structure Benzeneacetic acid, 2-[(2,6-dichlorophenyl)amino]-, compd. with 1-pyrrolidineethanol (1:1) structure](https://static.chemtradehub.com/structs/119/119623-66-4-5301.webp)



