Temperature dependent spectral properties of type-I and quasi type-II CdSe/CdS dot-in-rod nanocrystals

Literature Information

Publication Date 2012-01-16
DOI 10.1039/C2CP23844F
Impact Factor 3.676
Authors

Xiaoming Wen, Amit Sitt, Pyng Yu, Yon-Rui Toh, Jau Tang


View Original

Abstract

We investigated systematically the temperature dependence of the spectral properties such as the band gap, bandwidth and fluorescence intensity of CdSe/CdS dot-in-rod nanocrystals. These asymmetry nanoparticles were synthesized by seeded growth techniques with band alignment of the type-I and quasi type-II with initial core sizes of 3.3 and 2.3 nm, respectively. With increasing temperature the band gap decreases and bandwidth increases, largely due to exciton–phonon scattering. Anomalous variations of the band gap and bandwidth were observed at 200–240 K, and the variations are attributed to the anisotropic strain in the CdSe/CdS interface due to temperature dependent lattice mismatch. The integrated intensity of fluorescence shows two variation regimes. In the low temperature regime, the intensity remained roughly constant due to the temperature dependent carrier mobility and trapping by the defect states in the CdS shell. However, in the higher temperature regime, the intensity decreased quickly due to thermal/phonon assisted escape from the CdSe dot. The barrier depths are estimated to be about 557 and 285 meV for type-I and quasi type-II samples, respectively.

Related Literature

Front cover

2023-11-22 Cover

DOI: 10.1039/D3TB90219F

Mangifera indica stone-assisted layered double hydroxide biocomposites: efficient contenders for reactive dye adsorption from aqueous sources

Marrium Saeed, Urooj Kamran, Amina Khan, Md Irfanul Haque Siddiqui, Hasan Jamal, Haq Nawaz Bhatti

2023-11-27 Paper

DOI: 10.1039/D3NJ04133F

Bromination of organic spacer impacts on the structural arrangement, phase transitions, and optical and electrical properties of a hybrid halide compound:[(CH3)3N(CH2)3Br]2PdBr4

Mohamed Saadi, Imen Dakhlaoui, Fadhel Hajlaoui, Nidhal Drissi, Mustapha Zighrioui, Fethi Jomni, Nathalie Audebrand, Marie Cordier

2023-11-24 Paper

DOI: 10.1039/D3NJ04819E

Contents list

2023-12-18 Front/Back Matter

DOI: 10.1039/D4NJ90002B

Preparation and characterisation of wheat starch-based aerogels for procyanidin encapsulation to enhance stability

Yu Gao, Hong-Ning Lv, Sheng-Hua Zha, Xiao-Li Sun

2023-11-21 Paper

DOI: 10.1039/D3NJ03311B

Rational design of copper(i)-doped metal–organic frameworks as dual-functional nanocarriers for combined chemo–chemodynamic therapy

Lijia Yao, Bingquan Chen, Hailong Wu, Yuanjing Cui, Guodong Qian

2023-10-19 Paper

DOI: 10.1039/D3TB01869E

Surface plasmon resonance biosensor chips integrated with MoS2–MoO3 hybrid microflowers for rapid CFP-10 tuberculosis detection

Ahmad Nuruddin, Muhammad Iqbal, Hutomo Suryo Wasisto

2023-11-16 Paper

DOI: 10.1039/D3TB01327H

A mechanistic study on coupling of CO2 and epoxide mediated by guanidine/TBAI catalysts

Yihua Fu, Yan Zhang, Changwei Hu, Zhishan Su

2023-12-01 Paper

DOI: 10.1039/D3NJ04395A

Chitosan functionalized gold nanostars as a theranostic platform for intracellular microRNA detection and photothermal therapy

Xiaoxue Dong, Zongwei Zhu, Qian Sun, Hongqian Zhang, Chuanxu Yang

2023-11-02 Paper

DOI: 10.1039/D3TB02029K

You might also like

Compound Q&A

Is 6-(3-Fluorophenyl)picolinic acid (CAS: 887982-40-3) safe?

6-(3-Fluorophenyl)picolinic acid is generally considered safe for laboratory use...

887982-40-36-(3-Fluorophenyl)pi...
Compound Q&A

What industries use (3R)-3-Pyrrolidinol (CAS: 2799-21-5)?

(3R)-3-Pyrrolidinol is used in the pharmaceutical industry as a precursor for dr...

2799-21-5(3R)-3-Pyrrolidinol
Compound Q&A

What precautions should be taken when handling (4R,5R)-4,5-Diethoxycarbonyl-2,2-dimethyldioxolane (CAS: 59779-75-8)?

When handling (4R,5R)-4,5-Diethoxycarbonyl-2,2-dimethyldioxolane (CAS: 59779-75-...

59779-75-8(4R,5R)-4,5-Diethoxy...
Compound Q&A

How is 1-(6-Chloroimidazo[1,2-b]pyridazin-3-yl)ethanone (CAS: 90734-71-7) typically synthesized?

1-(6-Chloroimidazo[1,2-b]pyridazin-3-yl)ethanone is often synthesized via a mult...

90734-71-71-(6-Chloroimidazo[1...
Compound Q&A

What is the market or research trend for N-Ethyl-3,4-dimethylbenzylamine (CAS: 39180-83-1)?

The market for N-Ethyl-3,4-dimethylbenzylamine (CAS: 39180-83-1) remains steady,...

39180-83-1N-Ethyl-3,4-dimethyl...
Compound Q&A

What is Tert-butyl 3-(pyrrolidin-1-yl)azetidine-1-carboxylate (CAS: 1019008-21-9)?

Tert-butyl 3-(pyrrolidin-1-yl)azetidine-1-carboxylate is a chemical compound wit...

1019008-21-9Tert-butyl 3-(pyrrol...
Compound Q&A

What regulatory guidelines apply to 1-Bromo-3-chloro-2,4-dimethoxybenzene (CAS: 1228956-93-1)?

1-Bromo-3-chloro-2,4-dimethoxybenzene (CAS: 1228956-93-1) falls under the classi...

1228956-93-11-Bromo-3-chloro-2,4...
Compound Q&A

Is 8-Bromo-2-methyl-3,4-dihydroisoquinolin-1(2H)-one (CAS: 1368622-07-4) safe?

The safety of 8-Bromo-2-methyl-3,4-dihydroisoquinolin-1(2H)-one (CAS: 1368622-07...

1368622-07-48-Bromo-2-methyl-3,4...
Compound Q&A

Is Benzyl [(3S)-2,6-dioxo-3-piperidinyl]carbamate (CAS: 22785-43-9) safe?

Benzyl [(3S)-2,6-dioxo-3-piperidinyl]carbamate is generally safe when handled wi...

22785-43-9Benzyl [(3S)-2,6-dio...
Compound Q&A

How should 1-{[4-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]sulfonyl}pyrrolidine (CAS: 928657-21-0) be stored?

1-{[4-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]sulfonyl}pyrrolidine s...

928657-21-01-{[4-(4,4,5,5-Tetra...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.