Preconcentration and determination of As, Cd, Pb and Bi using different sample introduction systems, cloud point extraction and inductively coupled plasma optical emission spectrometry

Literature Information

Publication Date 2011-10-07
DOI 10.1039/C1AY05246B
Impact Factor 2.896
Authors

Fernanda dos Santos Depoi, Tiago Charão de Oliveira, Diogo Pompéu de Moraes, Dirce Pozebon


View Original

Abstract

This study deals with the development of a method for As, Bi, Cd and Pb preconcentration and determination using cloud point extraction (CPE) and inductively coupled plasma optical emission spectrometry (ICP OES). Hydride generation, pneumatic nebulization and micronebulization/aerosol desolvation were investigated for introducing the surfactant rich phase into the ICP. O,O-Diethyldithiophosphate (DDTP) was used as complexant and octylphenoxypolyethoxyethanol (Triton X-114) as surfactant. The influence of concentration of HNO3, HCl, DDTP, Triton X-114, surfactant rich phase in methanol, reductant of As, and NaBH4 was evaluated. The enrichment factors obtained were 10, 18, 12 and 14 for As, Bi, Cd and Pb, respectively. The limits of detection (LODs) of As, Bi, Cd and Pb were 0.055, 0.063, 0.047 and 0.28 μg L−1, respectively. Precision and accuracy were assessed by analysis of certified enriched water (NIST 1643e), oyster tissue (NIST 1566b), tobacco leaves (CTA-OTL-1), bush branches and leaves (GBW 07602) and analyte spiking. Microwave-induced combustion (MIC), sonication, and acid digestion were used for sample preparation. The developed method was applied for extraction and determination of As, Bi, Cd and Pb in river water, wine, fertilizer and urine. Analyte recovery close to 100% and relative standard deviation (RSD) lower than 5% were observed.

Related Literature

Correction: Synthesis and structural characterization of bio-based bis(cyclic carbonate)s for the preparation of non-isocyanate polyurethanes

Kamila Błażek, Hynek Beneš, Zuzana Walterová, Sabina Abbrent, Arantxa Eceiza, Tamara Calvo-Correas, Janusz Datta

2021-03-31 Correction

DOI: 10.1039/D1PY90040D

Chemical conjugation of nucleic acid aptamers and synthetic polymers

Maria Nerantzaki, Capucine Loth, Jean-François Lutz

2021-06-07 Minireview

DOI: 10.1039/D1PY00516B

Heterobimetallic Au(i)/Y(iii) single chain nanoparticles as recyclable homogenous catalysts

Josina L. Bohlen, Bragavie Kulendran, Hannah Rothfuss, Peter W. Roesky

2021-06-28 Paper

DOI: 10.1039/D1PY00552A

Back cover

2021-04-13 Cover

DOI: 10.1039/D1PY90053F

Amphiphilic poly(ether urethanes) carrying associative terpyridine side groups with controlled spacing

Katharina Breul, Sebastian Seiffert

2021-03-23 Paper

DOI: 10.1039/D1PY00121C

A quinine-based quaternized polymer: a potent scaffold with bactericidal properties without resistance

Huan-Huan Ding, Mu-Han Zhao, Le Zhai, Jian-Bin Zhen, Le-Yun Sun, Jia-Zhu Chigan, Cheng Chen, Jia-Qi Li, Han Gao, Ke-Wu Yang

2021-03-25 Paper

DOI: 10.1039/D0PY01751E

Toughened PLA-b-PCL-b-PLA triblock copolymer based biomaterials: effect of self-assembled nanostructure and stereocomplexation on the mechanical properties

Neha Mulchandani, Kazunari Masutani, Sachin Kumar, Hideki Yamane, Yoshiharu Kimura, Vimal Katiyar

2021-06-18 Paper

DOI: 10.1039/D1PY00429H

Modeling ultrasound-induced molecular weight decrease of polymers with multiple scissile azo-mechanophores

Mathieu A. Ayer, Cheyenne H. Liu, Christoph Weder

2021-06-22 Paper

DOI: 10.1039/D1PY00420D

Back cover

2021-06-29 Cover

DOI: 10.1039/D1PY90090K

Front cover

2021-06-22 Cover

DOI: 10.1039/D1PY90085D

You might also like

Compound Q&A

What industries use (1R,3S)-1,3-Cyclopentanediol (CAS: 16326-97-9)?

(1R,3S)-1,3-Cyclopentanediol finds applications in various industries. In the ph...

16326-97-9(1R,3S)-1,3-Cyclopen...
Compound Q&A

What precautions should be taken when handling N'-[4-(Dimethylamino)phenyl]-N,N-dimethyl-1,4-benzenediamine (CAS: 637-31-0)?

When handling N'-[4-(Dimethylamino)phenyl]-N,N-dimethyl-1,4-benzenediamine, it i...

637-31-0N'-[4-(Dimethylamino...
Compound Q&A

Are there alternatives to 5-(2,4-Difluorophenyl)-2-methoxypyrimidine (CAS: 1352318-16-1) in synthesis?

There are several alternatives to 5-(2,4-Difluorophenyl)-2-methoxypyrimidine in ...

1352318-16-15-(2,4-Difluoropheny...
Compound Q&A

What regulatory guidelines apply to 1-(3-Methoxyphenoxy)propan-2-ol (CAS: 382141-68-6)?

1-(3-Methoxyphenoxy)propan-2-ol (CAS: 382141-68-6) must comply with the Globally...

382141-68-61-(3-Methoxyphenoxy)...
Compound Q&A

Is Tetrodotoxin Citrate (CAS: 18660-81-6) safe?

Tetrodotoxin Citrate is extremely dangerous and should be handled with extreme c...

18660-81-6Tetrodotoxin Citrate
Compound Q&A

What are the main uses of 2-Methyl-2-propanyl [(1R,3S)-3-hydroxycyclopentyl]carbamate (CAS: 225641-84-9)?

2-Methyl-2-propanyl [(1R,3S)-3-hydroxycyclopentyl]carbamate (CAS: 225641-84-9) i...

225641-84-92-Methyl-2-propanyl ...
Compound Q&A

How should waste containing 4-(2-Hydroxyhexafluoroisopropyl)Benzoic Acid (CAS: 16261-80-6) be handled?

Waste containing 4-(2-Hydroxyhexafluoroisopropyl)Benzoic Acid (CAS: 16261-80-6) ...

16261-80-64-(2-Hydroxyhexafluo...
Compound Q&A

How is 2-Methyl-2-proanyl {(2S)-1-[(benzyloxy)amino]-3-hydroxy-3-methyl-1-oxo-2-butanyl}carbamate (CAS: 102507-19-7) typically synthesized?

2-Methyl-2-proanyl {(2S)-1-[(benzyloxy)amino]-3-hydroxy-3-methyl-1-oxo-2-butanyl...

102507-19-72-Methyl-2-propanyl ...
Compound Q&A

What is Benzeneethanamine, α-ethyl-, hydrochloride (1:1) (CAS: 20735-15-3)?

Benzeneethanamine, α-ethyl-, hydrochloride (1:1) is an organic compound with the...

20735-15-3Benzeneethanamine, α...
Compound Q&A

Are there alternatives to 3-{(E)-[4-(Dimethylamino)phenyl]diazenyl}benzoic acid (CAS: 20691-84-3) in synthesis?

In the synthesis of compounds similar to 3-{(E)-[4-(Dimethylamino)phenyl]diazeny...

20691-84-33-{(E)-[4-(Dimethyla...

Source Journal

Analytical Methods

Analytical Methods
CiteScore: 5.1
Self-citation Rate: 3.7%
Articles per Year: 655

Analytical Methods welcomes early applications of new analytical and bioanalytical methods and technology demonstrating the potential for societal impact. We require that methods and technology reported in the journal are sufficiently innovative, robust, accurate, and compared to other available methods for the intended application. Developments with interdisciplinary approaches are particularly welcome. Systems should be proven with suitably complex and analytically challenging samples. We encourage developments within, but not limited to, the following technologies and applications: global health, point-of-care and molecular diagnostics biosensors and bioengineering drug development and pharmaceutical analysis applied microfluidics and nanotechnology omics studies, such as proteomics, metabolomics or glycomics environmental, agricultural and food science neuroscience biochemical and clinical analysis forensic analysis industrial process and method development

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.