Synthesis, characterization and cellular internalization of poly(2-hydroxyethyl methacrylate) bearing α-d-mannopyranose
Literature Information
Makoto Obata, Mayumi Shimizu, Tomoko Ohta, Aya Matsushige, Kaoru Iwai, Shiho Hirohara, Masao Tanihara
2-(α-D-Mannopyranosyloxy)ethyl methacrylate (ManEMA) was synthesized in stereochemically pure form, and isolated as an easy-to-handle dry white solid. Poly(ManEMA-co-HEMA)s were prepared by conventional radical copolymerization of ManEMA with 2-hydroxyethyl methacrylate (HEMA). The monomer reactivity ratio rManEMA and rHEMA were estimated to be 1.00 and 0.50, respectively. The initial clustering rate of poly(ManEMA-co-HEMA) with a mannose-binding lectin, concanavalin A, evaluated by turbidimetric assay, increased with increasing mole fraction of ManEMA units in the polymer, even at constant ManEMA unit concentration. This cluster glycoside effect of the linear glycopolymer, poly(ManEMA-co-HEMA), could be well interpreted by the sequence distribution of ManEMA units calculated on the basis of the terminal model. The cellular uptake and cytotoxicity of fluorescently labeled poly(ManEMA) was examined in HeLa cells. Confocal laser scanning microscope imaging revealed the endocytotic internalization of poly(ManEMA) in HeLa cells. The survival rate of HeLa cells treated with poly(ManEMA) was estimated to be 95.7 ± 1.7% versus untreated cells. These results indicate that ManEMA is a promising monomer for development of medicinal glycopolymers.
Related Literature
Understanding the fundamentals of redox mediators in Li–O2 batteries: a case study on nitroxides
Benjamin J. Bergner, Christine Hofmann, Adrian Schürmann, Daniel Schröder, Klaus Peppler, Peter R. Schreiner, Jürgen Janek
DOI: 10.1039/C5CP04505C
A combined computational and experimental investigation of Mg doped α-Fe2O3
Monica Kosa, Hannah Noa Barad, Vijay Singh, David A. Keller, Klimentiy Shimanovich, Sven Rühle, Assaf Y. Anderson, Arie Zaban, Dan Thomas Major
DOI: 10.1039/C5CP05987A
Effect of hydration on the organo-noble gas molecule HKrCCH: role of krypton in the stabilization of hydrated HKrCCH complexes
Biswajit Biswas, Prashant Chandra Singh
DOI: 10.1039/C5CP04744G
Prediction of spin–orbital coupling effects on the electronic structure of two dimensional van der Waals heterostructures
Baiqing You, Xiaocha Wang, Wenbo Mi
DOI: 10.1039/C5CP05068E
Porous nanoarchitectures of spinel-type transition metal oxides for electrochemical energy storage systems
Min-Sik Park, Jeonghun Kim, Ki Jae Kim, Jong-Won Lee, Jung Ho Kim
DOI: 10.1039/C5CP05936D
Long term puzzles of the CH and CD energetics and related phenomena revisited; solutions sought through REMPI-photofragmentations of bromomethanes
Arnar Hafliðason, Huasheng Wang, Ágúst Kvaran
DOI: 10.1039/C5CP06097D
Adsorption of O2 on anionic silver clusters: spins and electron binding energies dominate in the range up to nano sizes
Jun Ma, Xizi Cao, Xiaopeng Xing, Xuefeng Wang, Joel H. Parks
DOI: 10.1039/C5CP06116D
Exceptional H2 sorption characteristics in a Mg2+-based metal–organic framework with small pores: insights from experimental and theoretical studies
Tony Pham, Katherine A. Forrest, Eduardo H. L. Falcão, Juergen Eckert, Brian Space
DOI: 10.1039/C5CP05906B
An EPR study of ampullosporin A, a medium-length peptaibiotic, in bicelles and vesicles
Annalisa Dalzini, Fernando Formaggio, Claudio Toniolo, Marina Gobbo, Anna Lisa Maniero
DOI: 10.1039/C5CP04136H
You might also like
What is 3-Fluoro-2-methylbenzylamine (CAS: 771573-36-5)?
3-Fluoro-2-methylbenzylamine is an organic compound with the CAS number 771573-3...
Is Tert-butyl 2-(oxetan-3-ylidene)acetate (CAS: 1207175-03-8) safe?
Tert-butyl 2-(oxetan-3-ylidene)acetate is considered safe for its intended uses ...
What precautions should be taken when handling 4-Acetyl-2-fluorobenzonitrile (CAS: 214760-18-6)?
Proper personal protective equipment (PPE) such as gloves, goggles, and a lab co...
How is 2-Ethyl-4-methyl-1,3-thiazole (CAS: 15679-12-6) typically synthesized?
2-Ethyl-4-methyl-1,3-thiazole is commonly synthesized via the reaction of thiour...
How should 5',5''-([2,2'-Bithiophene]-5,5'-diyl)bis(([1,1':3',1''-terphenyl]-4,4''-dicarboxylic acid)) (CAS: 1227780-71-3) be stored?
This compound should be stored in a cool, dry place away from direct sunlight an...
What regulatory guidelines apply to L-Lysine Acetate Salt (CAS: 52315-92-1)?
L-Lysine Acetate Salt (CAS: 52315-92-1) is subject to various regulatory guideli...
Is 6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) safe?
6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) is generally conside...
What are the physical and chemical properties of 1,1'-Sulfonylbis(1H-imidazole) (CAS: 7189-69-7)?
1,1'-Sulfonylbis(1H-imidazole) is a crystalline solid with a molecular weight of...
What industries use 4-methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5)?
4-Methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5) is primarily used i...
How should waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) be handled?
Waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) should be ...
Source Journal
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.













![(2E)-4-[(1R,2S,8R,19S,21R)-14-Hydroxy-11-isopropenyl-8,23,23-trimethyl-5-(3-methyl-2-buten-1-yl)-16,20-dioxo-3,7,22-trioxaheptacyclo[17.4.1.1~8,12~.0~2,17~.0~2,21~.0~4,15~.0~6,13~]pentacosa-4(15),5,13
,17-tetraen-21-yl]-2-methyl-2-butenoic acid structure (2E)-4-[(1R,2S,8R,19S,21R)-14-Hydroxy-11-isopropenyl-8,23,23-trimethyl-5-(3-methyl-2-buten-1-yl)-16,20-dioxo-3,7,22-trioxaheptacyclo[17.4.1.1~8,12~.0~2,17~.0~2,21~.0~4,15~.0~6,13~]pentacosa-4(15),5,13
,17-tetraen-21-yl]-2-methyl-2-butenoic acid structure](https://static.chemtradehub.com/structs/173/173867-04-4-d2d3.webp)
