Structural and hygroscopic changes of soot during heterogeneous reaction with O3

Literature Information

Publication Date 2010-07-23
DOI 10.1039/C0CP00402B
Impact Factor 3.676
Authors

Yongchun Liu, Chang Liu, Jinzhu Ma, Qingxin Ma, Hong He


View Original

Abstract

Soot aerosols are ubiquitous in the atmosphere and play an important role in global and regional radiative balance and climate. Their environmental impact, however, greatly depends on their structure, composition, particle size, and morphology. In this study, the structural changes of a model soot (Printex U) during a heterogeneous reaction with 80 ppm O3 at 298 K were investigated using in situ Raman spectroscopy, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and transmission electron microscopy (TEM). Hygroscopic changes due to heterogeneous reaction with O3 were also studied by water sorption analyzer. The consumption of amorphous carbon (D3 band) and disordered graphitic lattice (D4 band) of soot by ozonization was confirmed by the decrease in the full widths at half maximum and their relative integrated intensities (percentages of integrated areas). Oxygen containing surface species including ketone, lactone, and anhydride were also observed in Raman and IR spectra of ozonized soot. The ozonized soot showed more compacted aggregates with a smaller average diameter of primary particles (29.9 ± 7.7 nm) and a larger fractal dimension (1.81 ± 0.08) when compared with fresh soot (36.9 ± 9.4 nm, and 1.61 ± 0.10). The ozonization reaction leads to an enhancement of hygroscopicity of soot due to the decrease in particle diameter and the formation of oxygen containing surface species.

Related Literature

A XAS study of the luminescent Eu centers in thiosilicate phosphors

Katleen Korthout, Anthony B. Parmentier, Philippe F. Smet, Dirk Poelman

2013-03-22 Paper

DOI: 10.1039/C3CP44334E

Photofragmentation at 263 nm of small peptides containing tyrosine: the role of the charge transfer on CO

Christophe Dehon, Satchin Soorkia, Mélanie Pedrazzani, Christophe Jouvet, Michel Barat, Jacqueline A. Fayeton, Bruno Lucas

2013-04-05 Paper

DOI: 10.1039/C3CP50720C

Self-assembly of semiconductor/insulator interfaces in one-step spin-coating: a versatile approach for organic field-effect transistors

Chuan Liu, Yun Li, Michael V. Lee, Akichika Kumatani, Kazuhito Tsukagoshi

2013-02-27 Perspective

DOI: 10.1039/C3CP44715D

Pair distribution function (PDF) analysis of mesoporous α-Fe2O3 and Cr2O3

Adrian H. Hill, Mattia Allieta

2013-04-17 Paper

DOI: 10.1039/C3CP44322A

Comparison of the performance of an array of nanoband electrodes with a macro electrode with similar overall area

Reshma Sultana, Naser Reza, Helena Woodvine, Jonathan G. Terry, Anthony J. Walton, Charlotte L. Brady, Ilka Schmueser, Andrew R. Mount

2013-04-05 Paper

DOI: 10.1039/C3CP50759A

Many-body effects in silicene, silicane, germanene and germanane

Ying Dai, Baibiao Huang, Timo Jacob

2013-04-11 Paper

DOI: 10.1039/C3CP51078F

Single-layered V2O5 a promising cathode material for rechargeable Li and Mg ion batteries: an ab initio study

Zhiguo Wang, Qiulei Su, Huiqiu Deng

2013-04-12 Communication

DOI: 10.1039/C3CP51167G

Strong-pump strong-probe spectroscopy: effects of higher excited electronic states

Maxim F. Gelin, Dassia Egorova, Wolfgang Domcke

2013-03-22 Paper

DOI: 10.1039/C3CP44454F

How to interpret current–voltage relationships of blocking grain boundaries in oxygen ionic conductors

Seong K. Kim, Sergey Khodorov, Chien-Ting Chen, Sangtae Kim, Igor Lubomirsky

2013-04-18 Communication

DOI: 10.1039/C3CP00145H

You might also like

Compound Q&A

What precautions should be taken when handling 2-Chloro-1,2-bis(4-methylphenyl)ethanone (CAS: 71193-32-3)?

When handling 2-Chloro-1,2-bis(4-methylphenyl)ethanone (CAS: 71193-32-3), it is ...

71193-32-32-Chloro-1,2-bis(4-m...
Compound Q&A

What industries use 4-Ethoxy-3-(5-methyl-4-oxo-7-propyl-1,4-dihydroimidazo[5,1-f][1,2,4]triazin-2-yl)benzenesulfonyl chloride (CAS: 224789-26-8)?

4-Ethoxy-3-(5-methyl-4-oxo-7-propyl-1,4-dihydroimidazo[5,1-f][1,2,4]triazin-2-yl...

224789-26-84-Ethoxy-3-(5-methyl...
Compound Q&A

How should Methyl 3-Oxo-4-Androsten-17-Carboxylate (CAS: 2681-55-2) be stored?

Methyl 3-Oxo-4-Androsten-17-Carboxylate (CAS: 2681-55-2) should be stored in a c...

2681-55-2Methyl 3-Oxo-4-Andro...
Compound Q&A

What are the main uses of (R)-3-Amino-4-(3-hexylphenylamino)-4-oxobutylphosphonic acid (CAS: 909725-61-7)?

(R)-3-Amino-4-(3-hexylphenylamino)-4-oxobutylphosphonic acid is primarily used i...

909725-61-7(R)-3-Amino-4-(3-hex...
Compound Q&A

What regulatory guidelines apply to 2-Methyl-2-propanyl 3-amino-3-carbamoyl-1-azetidinecarboxylate (CAS: 1254120-14-3)?

2-Methyl-2-propanyl 3-amino-3-carbamoyl-1-azetidinecarboxylate (CAS: 1254120-14-...

1254120-14-32-Methyl-2-propanyl ...
Compound Q&A

Are there alternatives to (E)-4-(tert-Butoxy)-4-oxobut-2-enoic acid (CAS: 135355-96-3) in synthesis?

There are alternative reagents that can be used in synthesis instead of (E)-4-(t...

135355-96-3(E)-4-(tert-Butoxy)-...
Compound Q&A

What are the physical and chemical properties of [2-(3-Chlorophenyl)-1,3-thiazol-4-yl]methanol (CAS: 121202-20-8)?

[2-(3-Chlorophenyl)-1,3-thiazol-4-yl]methanol (CAS: 121202-20-8) is a crystallin...

121202-20-8[2-(3-Chlorophenyl)-...
166249-17-8Methyl (2S)-[(4S)-2,...
Compound Q&A

What is the market or research trend for 1-Bromo-2-isocyanatoethane (CAS: 42865-19-0)?

The market for 1-Bromo-2-isocyanatoethane (CAS: 42865-19-0) is driven by its use...

42865-19-01-Bromo-2-isocyanato...
Compound Q&A

What are the main uses of 4-Nitro-D-phenylalanine hydrochloride (CAS: 147065-06-3)?

4-Nitro-D-phenylalanine hydrochloride (CAS: 147065-06-3) is primarily used in re...

147065-06-34-Nitro-D-phenylalan...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.