On the physical origin of the cation–anion intermediate bond in ionic liquids Part I. Placing a (weak) hydrogen bond between two charges‡
Literature Information
Sebastian B. C. Lehmann, Martin Roatsch, Matthias Schöppke, Barbara Kirchner
The intermediate bond forces in ionic liquids are investigated from static quantum chemical calculations at various methods and two basis sets. The experimentally observed red-shift of the donor-proton bond stretching frequency due to a bond elongation is confirmed by all methods. Comparing Hartree–Fock to second-order Møller–Plesset perturbation theory, the Hartree–Fock method gives in many cases an erroneous description of the geometries. Furthermore, the Hartree–Fock interaction energies can deviate up to 60 kJ mol−1 from Møller–Plesset perturbation theory indicating the importance of dispersion interaction. While the usual trends of decreasing stability or interaction energies with increasing ion sizes are found, the geometries involving hydrogen atoms do not change this order of total interaction energies. Therefore, the hydrogen bond is not the most important interaction for ion pairs with regard to the total interaction energy. On the other hand, the different established analysis methods give rise to hydrogen bonding in several ion pairs. Charge analysis reveals the hydrogen-bonding character of the ion pair and shows, depending on the type of ions combined and further on the type of conformers considered, that a hydrogen bond can be present. The possibility of hydrogen bonding is also shown by an analysis of the frontier orbitals. Calculating potential energy surfaces and observing from this the change in the donor proton bond indicates that regular hydrogen bonds are possible in ion pairs of ionic liquids. Thereby, the maximum of bond elongation exceeds the one of a usual hydrogen bond by far. The more salt-like hydrogen-bonded ion pair [NH4][BF4] exhibits a steeper maximum than the more ionic liquid like ion pair [EtNH3][BF4]. The fact that imidazolium-based ionic liquids as [Emim][Cl] can display two faces, hydrogen bonding and purely ionic bonding, points to a disturbing rather than stabilizing role of hydrogen bonding on the interaction of the counterions in imidazolium-based ionic liquids. While geometry and charge analysis provides attributes of weak (blue-shifted) hydrogen bonds, large bond elongations accompanied by red-shifts are obtained for the ion pairs investigated. This can be understood by the simple fact that these imidazolium-based ionic liquid ion pairs constitute weak hydrogen bonds placed between two delocalized charges.
Related Literature
A density-functional theory study of electrochemical adsorption of sulfuric acid anions on Pt(111)
Juan A. Santana, Carlos R. Cabrera, Yasuyuki Ishikawa
DOI: 10.1039/C000981D
Thiol-capped CdTenanocrystals: progress and perspectives of the related research fields
Nikolai Gaponik, Andrey L. Rogach
DOI: 10.1039/C000916D
New organic–inorganic hybrid microporous organosilica having high metal ion adsorption capacity
Manidipa Paul, Nabanita Pal, P. R. Rajamohanan, Bharat S. Rana, Anil K. Sinha, Asim Bhaumik
DOI: 10.1039/B925619A
Electronic absorption and vibrational spectra and nonlinear optical properties of 4-methoxy-2-nitroaniline
C. Ravikumar, I. Hubert Joe
DOI: 10.1039/B927190B
In situSTM study of the adsorption and electropolymerization of o-, m-, and p-ethylaniline molecules on Au(111)electrode
Sihzih Chen, Chonzan Hwuang, HsinLing Tu, ChunGuey Wu, ShuehLin Yau, LiangJen Fan, YawWen Yang
DOI: 10.1039/B924035G
A kinetic study on the conversion of cis-2-butene with deuterium on a Pd/Fe3O4 model catalyst
Wiebke Ludwig, Aditya Savara, Björn Brandt, Swetlana Schauermann
DOI: 10.1039/C0CP00078G
Confinement effects for ionic carriers in SrTiO3 ultrathin films: first-principles calculations of oxygen vacancies
R. A. Evarestov, J. Maier
DOI: 10.1039/C0CP01060J
Measurement of hetero-nuclear distances using a symmetry-based pulse sequence in solid-state NMR
Lei Chen, Olivier Lafon, Julien Trébosc, Feng Deng, Jean-Paul Amoureux
DOI: 10.1039/B926546E
You might also like
How should waste containing N-Methoxy-N-methyl-1,3-thiazole-5-carboxamide (CAS: 898825-89-3) be handled?
Waste containing N-Methoxy-N-methyl-1,3-thiazole-5-carboxamide (CAS: 898825-89-3...
How should N-(4-Biphenylyl)dibenzo[b,d]furan-4-amine (CAS: 1318338-47-4) be stored?
N-(4-Biphenylyl)dibenzo[b,d]furan-4-amine should be stored in a tightly sealed c...
What is the market or research trend for 3-Acetamido-5-amino-2,4,6-triiodobenzoic acid (CAS: 1713-07-1)?
The market for 3-Acetamido-5-amino-2,4,6-triiodobenzoic acid (CAS: 1713-07-1) is...
How should Benzyl 2-O-acetyl-3,4,6-tri-O-benzyl-beta-D-galactopyranoside (CAS: 61820-03-9) be stored?
Benzyl 2-O-acetyl-3,4,6-tri-O-benzyl-beta-D-galactopyranoside (CAS: 61820-03-9) ...
What regulatory guidelines apply to 2-Ethylpiperazine dihydrochloride (CAS: 438050-52-3)?
2-Ethylpiperazine dihydrochloride (CAS: 438050-52-3) is regulated under the Glob...
What regulatory guidelines apply to 1,1'-[1,3-Phenylenebis(methylene)]bis(3-methyl-1H-pyrrole-2,5-dione) (CAS: 119462-56-5)?
1,1'-[1,3-Phenylenebis(methylene)]bis(3-methyl-1H-pyrrole-2,5-dione) (CAS: 11946...
Are there alternatives to 5-Fluoro-2-(1-pyrrolidinyl)pyridine (CAS: 1287217-79-1) in synthesis?
Several alternatives can be used in the synthesis of 5-Fluoro-2-(1-pyrrolidinyl)...
What precautions should be taken when handling 1-((2R,3R,4R,5R)-5-((bis(4-methoxyphenyl)(phenyl)methoxy)methyl)-4-hydroxy-3-methoxytetrahydrofuran-2-yl)-5-methylpyrimidine-2,4(1H,3H)-dione (CAS: 153631-19-7)?
Proper personal protective equipment (PPE) must be worn when handling this compo...
What precautions should be taken when handling 6-Bromoimidazo[1,2-a]pyridin-8-amine (CAS: 676371-00-9)?
When handling 6-Bromoimidazo[1,2-a]pyridin-8-amine, it is important to wear appr...
Are there alternatives to (2S,4R)-4-(4-Nitrobenzyl)pyrrolidine-2-carboxylic acid hydrochloride (CAS: 1049740-22-8) in synthesis?
Alternatives to (2S,4R)-4-(4-Nitrobenzyl)pyrrolidine-2-carboxylic acid hydrochlo...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.












![[5-fluoro-2-(morpholine-4-carbonyl)phenyl]boronic acid structure [5-fluoro-2-(morpholine-4-carbonyl)phenyl]boronic acid structure](https://static.chemtradehub.com/structs/121/1217501-26-2-505c.webp)

![tert-Butyl 6-chloro-4-oxospiro[chroman-2,4'-piperidine]-1'-carboxylate structure tert-Butyl 6-chloro-4-oxospiro[chroman-2,4'-piperidine]-1'-carboxylate structure](https://static.chemtradehub.com/structs/101/1011482-37-3-88a5.webp)