Subfemtomolar electrochemical detection of target DNA by catalytic enlargement of the hybridized gold nanoparticlelabels
Literature Information
Murielle Rochelet-Dequaire, Benoît Limoges, Pierre Brossier
After showing the failure of conventional gold-enhancement procedures to amplify the gold nanoparticle-based electrochemical transduction of DNA hybridization in polystyrene microwells, a new efficient protocol was developed and evaluated for the sensitive quantification of a 35 base-pair human cytomegalovirus nucleic acid target (tDNA). In this assay, the hybridization of the target adsorbed on the bottom of microwells with an oligonucleotide-modified Au nanoparticle detection probe (pDNA-Au) was monitored by the anodic stripping detection of the chemically oxidized gold label at a screen-printed microband electrode (SPMBE). Thanks to the combination of the sensitive AuIII determination at a SPMBE with the large amount of AuIII released from each pDNA-Au, picomolar detection limits of tDNA can be achieved. Further enhancement of the hybridization signal based on the autocatalytic reductive deposition of ionic gold (AuIII) on the surface of the gold nanoparticle labels anchored on the hybrids was first envisaged by incubating the commonly used mixture of AuIII and hydroxylamine (NH2OH). However, due to a considerable nonspecific current response of poor reproducibility it was not possible to significantly improve the analytical performances of the method under these conditions. Complementary transmission electronic microscopy experiments indicated the loss of most of the grown gold labels during the post-enlargement rinsing step. To circumvent this drawback, a polymeric solute containing polyethyleneglycol and sodium chloride was introduced in the growth media to act as an aggregating agent during the catalytic process and thus retain the enlarged labels on the bottom of the microwell. This strategy, which led to an efficient increase of the hybridization response, allowed detection of tDNA concentrations as low as 600 aM (i.e., 104 lower than without amplification), and thus offers great promise for ultrasensitive detection of other hybridization events.
Related Literature
Construction of ‘smart’ surfaces with polymer functionalized silica nanoparticles
Yohei Kotsuchibashi, Ali Faghihnejad, Hongbo Zeng, Ravin Narain
DOI: 10.1039/C2PY20845H
Microporous organic polymers synthesized by self-condensation of aromatic hydroxymethyl monomers
Yali Luo, Shoucun Zhang, Yunxiang Ma, Wei Wang, Bien Tan
DOI: 10.1039/C2PY20914D
Insights into membrane-separated organic electrosynthesis: the case of adiponitrile electrochemical production
Daniela E. Blanco, Purnima A. Prasad, Kaylee Dunningan, Miguel A. Modestino
DOI: 10.1039/C9RE00389D
Rapid CO2 capture-to-mineralisation in a scalable reactor
Rafael M. Santos, Lidija Šiller
DOI: 10.1039/C9RE00446G
Model-based design of transient flow experiments for the identification of kinetic parameters
Conor Waldron, Arun Pankajakshan, Marco Quaglio, Enhong Cao, Federico Galvanin, Asterios Gavriilidis
DOI: 10.1039/C9RE00342H
Refinery integration of lignocellulose for automotive fuel production via the bioCRACK process and two-step co-hydrotreating of liquid phase pyrolysis oil and heavy gas oil
Anna Huber, Samir Reiter, Mario Lukasch, Berndt Hammerschlag, Julia Außerleitner, Daniela Painer, Peter Pucher, Matthäus Siebenhofer, Nikolaus Schwaiger
DOI: 10.1039/C9RE00352E
In situ synthesis of gold nanoparticles in polymer films under concentrated sunlight: control of nanoparticle size and shape with solar flux
L. Peres, V. Goetz, M. Respaud, K. Soulantica
DOI: 10.1039/C9RE00439D
Biodegradable alanine and phenylalanine alkyl ester polyphosphazenes as potential ligament and tendon tissue scaffolds
Jessica L. Nichol, Nicole L. Morozowich, Harry R. Allcock
DOI: 10.1039/C2PY20631E
Interrupted SET-LRP of methyl acrylate demonstrates Cu(0) colloidal particles as activating species
Martin E. Levere, Nga H. Nguyen, Hao-Jan Sun, Virgil Percec
DOI: 10.1039/C2PY20791E
Cerium oxide encapsulation by emulsion polymerization using hydrophilic macroRAFT agents
Nancy Zgheib, Jean-Luc Putaux, Antoine Thill, Elodie Bourgeat-Lami, Franck D'Agosto, Muriel Lansalot
DOI: 10.1039/C2PY20548C
You might also like
What is Ethyl 3-cyclohexylpropanoate (CAS: 10094-36-7)?
Ethyl 3-cyclohexylpropanoate is a clear, colorless to light yellow liquid with a...
How should waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl)nicotinic acid (CAS: 34783-31-8) be handled?
Waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl...
How should waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) be handled?
Waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) sho...
What precautions should be taken when handling Chloroac-nle-oh (CAS: 56787-36-1)?
When handling Chloroac-nle-oh (CAS: 56787-36-1), it is essential to wear appropr...
What industries use Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 752244-05-6)?
Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate is primarily used in the...
Are there alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis?
Alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis ...
How should waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) be handled?
Waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) should be managed...
What industries use 1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9)?
1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9) is used in various ...
Are there alternatives to 3-Bromo-5-(N-Boc)aminomethylisoxazole (CAS: 903131-45-3) in synthesis?
There are alternative reagents and compounds that can be used in the synthesis o...
What is Tungsten(IV) oxide (CAS: 12036-22-5)?
Tungsten(IV) oxide, also known as tungsten dioxide, is a chemical compound with ...
Source Journal
Analyst

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.













![Bis[(1,2,3,4,5-eta)-1-(diphenylphosphino)cyclopentadienyl]iron structure Bis[(1,2,3,4,5-eta)-1-(diphenylphosphino)cyclopentadienyl]iron structure](https://static.chemtradehub.com/structs/121/12150-46-8-ecd2.webp)
